General laboratory equipment

This listing is for a Abbott 3531 Centrifuge

This listing is for a Edwards E2M30 Rotary Vane Pump

This listing is for a Affymetrix GeneChip Hybridization Oven 640This unit has 1 foot missing.

This listing is for a Tissue-Tek TEC 4715 Embedding centre with Cryo console Coldplate

This listing is for a VWR 620 Standard Magnetic Stirer

This listing is for a Illumina Boekel 230401 - 21LL Hybridization Oven

This listing is for a Horizon SPE-DEX 4790 controller

This listing is for a Thermolyne Roto Mix 50800 Orbital shaker - Speed Range: 80 - 200 rpm - Platfo (more)rm Dimensions: 8.75 x 8.75 in. - Timing Range: 0 to 15 minutes - Timer Accuracy: +/- 10 seconds - Overall Dimensions: 9.625 x 4.25 x 10.75 in. - Orbital Diameter: 0.8 in. - Maximum Load: 5 lbs. - Operating Temperature: 4°C - 56°C - Storage Temperature: -40°C - 70°C

This listing is for a Nickel Electro Water bath

This listing is for a Stuart SA8 Vortex mixer Variable speed control between 200 and 2500 rpm Inter (more)mittent or continuous mode Stable low profile body Robust die-cast construction

This listing is for a Stuart Scientific Autovortex Mixer SA2

This listing is for a Kirsch MED-200 Medication Refrigerator Safe storage of medicines and vaccines  (more)Highest user-friendliness Powerful chiller for maximum temperature constancy even after long door openings Aluminium inner container High energy efficiency Visual and acoustic alarm signal even in case of power failure Freeze protection Key switch against manipulation Comfort access Height-adjustable drawers Automatic defrosting Advantages PRO-ACTIVE line Your introduction to KIRSCH quality Highest reliability Robustness Temperature stability Flexibility Maximum safety Reduction of the power consumption by up to 60%. Faster response time in the event of imminent faults thanks to proactive alerting Minimization of the temperature deviation in the cold store Highest storage safety through coordinated components The MED 200 PRO-ACTIVE in detail PRO-ACTIVE control: Permanent, proactive monitoring of performance data and alarming in case of deviations; worldwide most accurate temperature control thanks to two standard PT-1000 sensors Outer housing made of galvanised sheet steel (rust protected), with white, scratch-resistant powder coating. Length of the plug cable approx. 2.8 m. Adjustable feet in the front area to compensate for uneven floors. Interior made of smooth aluminium with colourless protective coating. Adjustable rails (15 mm grid) for flexible interior design. Interior consisting of four drawers on roller runners with locking device and a plastic-coated grille on supports. Each drawer has one adjustable longitudinal and six adjustable transverse dividers. Storage area per drawer = 0.13 m2. Insulation with 50 mm extra thick, made of high-quality, pressure-foamed and environmentally friendly material. Energy-saving. Door with easily replaceable plastic magnetic sealing frame, lockable. Door hinge exchangeable (also retrofitting), standard with right-hand hinge. Recirculating air cooling with two axial fans, switches off automatically when the door is opened, ensures even temperature control and reduces the temperature gradient to a minimum. Automatic defrosting, with thermal control and time limit. Evaporation of condensation water in the refrigeration machine room. Electronic temperature control protected against manipulation by key switch. Membrane keyboard with digital temperature display and minimum/maximum temperature memory. Data documentation readable via USB interface using USB stick and KIRSCH Datanet software. Warning functions with optical and acoustic alarm signal in case of temperature deviation. Power failure alarm, the monitoring unit remains in operation for approx. 30 hours due to a rechargeable battery. Alarm forwarding via potential-free contact possible (e.g. to mobile phone with optional GSM module or connection to central control system). Freeze protection against minus temperatures. Forced-ventilated, hermetically sealed, energy-saving, low-noise, service-friendly. Supply and exhaust air is via front ventilation grille. Cooling (Cooling technology): dynamic (circulation cooling) Lowest temperature: + 2°C alarm: opticalacoustical automatic defrost: with Explosion proof: no Glass door: without lockable: yes (door) Application area: pharmaceutical refrigerator Cooling technology: refrigerator Average consumption: 0,760 kWh/24 h Width inside (refrigerator): 430 mm Height inside (refrigerator): 870 mm Depth inside (refrigerator): 430 mm Depth (refrigerator): 546 mm Width (refrigerator): 540 mm Height (refrigerator): 1220 mm Capacity (gross): 170 l Shipping weight: 80,00 Kg Product weight: 69,00 Kg Dimensions: × × cm

Rudolf Grauer Laborboy Boy-10a Router Lift Table Laboratory Lift Stand Tray dimensions: 20 x 20cm Mi (more)nimum Height: 9cm Maximum height: 29cm With signs of wear

MILLIPORE RCS High Flow Touch Microbial Air Sampler with : Rotor Power Supply 2 Additional Cables  (more)(See Picture) Two Disks (RCS Management Software + USB Serial Printer Adapter) Quick Start Guide Rotor Calibration is Expired - Calibration of rotor is required

Metrohm 838 Advanced Sample Processor for parts without caroussel Without Probe Without Software

MICROM HM 350 Microtome. With pedal and control console.

Diaphragm vacuum pump KNF N735.3 AT.18 Flow (max.): 50 l/min Ultimate vacuum (max.): 67 mbar (abs.)  (more)found following our proper functioning test (see photo) Clean operation Signs of wear related to the age of the material

Angular rotor for centrifuge Nr.12001 SIGMA 14000 rpm 24X1.5ml Year of expiry: 1997 Without cover

Fisherbrand Microstirrer laboratory magnetic stirrer NEW - Quantity available: 3 New in its original (more) packaging Model: Microstirrer RPM speed range: 0 - 1100 min⁻¹ Max mixing capacity H₂O: 5 L Plate Material: Epoxy Plate, LxW: 128×120 mm W×D×H (mm): 128×120×48 Weight: 0.55 kg Quantity available: 6

Safety Bunsen Burner FIREBOY PLUS IBS Mobile Bunsen burner with two adjustment knobs for gas and air (more). Sensor activated ignition with nozzle for propane / butane L × W × H: 100 × 150 × 60 mm Weight: 1.3 kg

METTLER TOLEDO Stromboli Karl Fischer Oven Sample Changer In combination with the Karl Fischer compa (more)ct titrators C30 and V30 the Stromboli sample changer enables up to 14 samples to be titrated in unattended operation. Oven Temperature range: 50°C to 300 °C Temperature accuracy: ±3 °C Dimension (W x D x H) with rack: 250 x 400 x 300 mm Weight: 5 kg

10 Sorvall / Heraeus Adapters 6455 for centrifuge 16x15mL For buckets 75006435

Millipore water purifier model elix 20 with flow of 400 liters / day Model : ZLXS50020 Daily Product (more) Water Usage : 400 l/day Nature of feed water : Current water Water quality : Type 2 Biological information: Microorganisms < 10 UFC/ml Physical-chemical information: Conductivity (µS/cm) < 0,2 µS/cm Flow rate (l/h) 20 l/h Flow rate 20 l/h Water resistivity 25°C > 5 MΩ·cm TOC of produced water < 30 ppb Dimensions Height : 734 mm Width : 662 mm Depth : 441 mm Operating weight : 45 kg Filter and membrane to change

Biotrace International Digital Heating Block Temperature Range Ambient +5C to 150C Temperature unifo (more)rmity +/-0.2C (at 37C in block) Temperature accuracy +/-0.3C Dimensions (W x D x H) / Weight 20 x 26.5 x 8.3 cm 2.2 kg With Aluminum block for 24 tubes Ø11.5mm, depth 20mm

WLD-TEC Laboratory Gas Burner Flame 100 Bunsen burner Measurements (w x h x d) (gas burner): 89 x 3 (more)4 x 88 mm Connected load (gas burner): 48 g/h liquid gas, 53 l/h natural gas (LL)48 g/h Width (gas burner): 89 mm Burner tube: removable, stainless steel Gas connection: 1/4'' Weight: 385 g Height (gas burner): 34 mm Power consumption: 2 VA Temperature threshold level: 0.66 kW liquid gas, 0.66 kW natural gas Power connection: 100 - 240 V / 50 / 60 Hz / max. 0.3 A 9 V DC / 1 A Button: Start-Stop

VWR Mini Vortex Mixer Variable speed control Continuous or touch mode Orbit (mm) 4,9 Speed range (mi (more)n-1) 300 - 2500 W×D×H (mm) 131×194×135 Weight (kg) 5.5

PROLABO OSCILL 12 laboratory mixer / agitator For 6 pliers Supplied with 12 LABOMECA pliers: 8 to 3  (more)fingers 4 to 4 fingers Year of manufacture: 1990

TOMY CAPSULE Mini Centrifuge HF-120 Fixed angle rotor for 6 tubes of 1.5 / 2.0 mL FEATURES Speed (rp (more)m/g): 6400/2100 Capacity: 1.5/2.0ml x 6 tubes Dimensions (mm): 150W x 160D x 132H (mm) Power: 220VAC 50/60Hz Weight: 1.2kg

VARIAN ProStar 410 HPLC Autosampler Cat. Number : 03-935290-01 Power Requirement : 115/230V, 50/60Hz (more), 250VA Sample Tray Capacity : 84 vials of 1.5 mL (Std) and 3 vials of 10 mL (LSV) Working Temperature : 10 - 40°C Loop Volume : 1 - 5000 µL Dimensions (WxDxH) : 30 x 49 x 34 cm Power ON/OFF -> ok Equipment not tested