Büchi SVL-42 6x Flask Flaschen Glass Tube Röhrchen

The ClonePix FL builds on the success of the Genetix white light ClonePix adding fluorescent imaging (more) capabilities for more intelligent selection. The unique proprietary technology behind ClonePix FL represents a major advance in cell line selection and development, significantly reducing the time and costs associated with new biopharmaceutical product development especially when compared to standard techniques such as limited dilution or cell sorting. Specification: White light imaging- Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension. Epi-illumination for imaging colonies as they are collected Fluorescence imaging- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance) Data tracking- Internal barcode reader for source and destination plates enables data tracking for each run Camera- Integrated 16-bit cooled CCD camera Imaging speed- 6-well microplate: 5 min for 2 wavelengths (standard conditions) Resolution- Standard: 28 micron; Maximum: 1.5 micron Containment- Fully enclosed working environment with Class 100-type, HEPA filtration Source plate type- PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray Destination plate type- PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate Source plate capacity- 10 plates Destination plate capacity- 10 plates Picking head- 8 x picking pins – each pin independently controlled Picking pin size- Diameter of picking pins is application specific – F1: suspension cells, F2: adherent cells Picking speed > 200 clones per hour Wash bath- Ethanol wash bath, automatically refilled Picking system fluids- 5 L sterile water supply, 5L waste bottle Pin drying- Proprietary halogen pin drying station

COMBISTORAGE CS360 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW