Heating & cooling

This listing is for 1 of 4 Leica Cooling unit EG 1150 C cold plate 4 x working condition (scratched  (more)surfaces) The Leica EG1150 C cold plate is held at a constant temperature of –5°C to support rapid cooling of embedded blocks and molds. The easy to load, large-capacity plate can hold in excess of 70 standard cassette molds. The Leica EG1150 C cold plate can be used as a stand-alone unit for re-cooling blocks prior to sectioning or as part of an embedding center to cool molds after paraffin dispensing. An optional cover reduces frost build-up in high humidity environments.

This listing is for a Microwave Laboratory Systems MLS Milestone traceClean

This listing is for a Gallenkamp Super Cold 40 Freezer Comes with key to lock the freezer

This listing is for a Thermolyne 16500 Dri-bath DB16520

This listing is for a Thermo Scientific High capacity Dryer A82100126 Digital controller facilitates (more) accurate and constant temperature control from 40° to 90°C. Polished stainless steel drying chamber includes an autoclavable drip tray. Includes air intake with removable filters and easy-to-clean epoxy-coated external finish.

This listing is for 1 of 2 Ortho Biovue System Heat block-32

This listing is for a Thermogenesis Thermoline MT204 Thawing system

This listing is for a TECHNE Dri-Block DB2D heater. Techne's Dri-block heaters provide a safe, dry,  (more)constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes. - LED digital display for fast and accurate setting of temperature - RS232 connection available for PC control - Can hold up to 2 aluminium insert blocks or one 96-well plate block - Temperature range from ambient to 100°C or 200°C - Fast heat-up rate 30°C to 100°C from just 12 minutes - Temperature stability at 40°C of less than ± 0.1°C SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFNL024

This listing is for a Amar Packaging Heat Shrink Chamber

This listing is for a Techne Dri-Block heater with sample concentrator

This listing is for a Cellpath 110-240 Vac Heat block

The VLT® HVAC Drive is designed to bring optimized process control to all heating, ventilation and a (more)ir conditioning (HVAC) applications. Easy to use and with built-in intelligence, the drive is fast and cost-effective to commission. It features a wide range of functions specifically developed for use with, for example, pumps, fans and compressors to save energy, meet environmental regulations and reduce costs in modern buildings. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR009

This listing is for a Pierce Reacti-Therm 111 Heating module 18840

This listing is for a Affymetrix GeneChip Hybridization Oven 640This unit has 1 foot missing.

This listing is for a Illumina Boekel 230401 - 21LL Hybridization Oven

HAAKE F3-S circulation thermostat water bath 270°C Temperature range: 20 to 270˚C Heating power: 110 (more)0W External dimensions (D)x(H)x(W): 33 x 33 x 19.1 cm. Internal dimensions (D)x(H)x(W): 10 x 15 x 12.5 cm. Weight: 8kg Electric Supply: 230V, 50/60Hz Tested OK

Thermo Fisher Scientific Revco Lab Freezer ULT430V Temperature Range: -30°C Capacity : 133 L 1 shel (more)ve Interior Dimensions (H x W x D): 50.8 x 50.8 x 50.8cm Exterior Dimensions (H x W x D): 73.4 x 61 x 86.4cm Defrost: Auto 220V Weight 96kg

Heraeus Vacutherm VT6025 Vacuum Oven 200 °C 25 Liters Internal Volume: 25 Liters Rated Temperature:  (more)200 °C External Dimensions: 43cm (D) x 48cm (W) x 60cm (H) Internal Dimensions: 30cm (D) x 30cm (W) x 27.5cm (H) With 2 shelves Vacuum Pump not included VACUUM Vacuum connection with tube shaft Ø 20 mm: DN 25 Measuring connection: DN 25 Max. final vacuum: mbar (hPa) 1 x 10–2 Weight: 58Kg Permissible total load: 40Kg Max. load of shelf: 20Kg Electrical input power Voltage: 230+/- 10% Power: 1.3kW Heat transfer to environment at 200 °C/300 °C : 340/- Wh/h Interior condition a little dirty, but functional equipment Equipment tested

JOUAN EB 170 incubator with natural convection 70°C Capacity: 170 liters Temperature range: Room tem (more)perature plus 5°C to 70°C interior glass door Integrated digital temperature display 2 shelves Power supply: 230V Frequency: 50-60Hz Power: 300W Overall dimensions (W x D x H): approximately 630 x 680 x 830 mm Interior dimensions (W x D x H): approx. 500 x 480 x 620 mm Weight: 60kg Tested at 37°C Year of manufacture: 1991

BINDER FED-240 oven / drying oven with forced convection 300°C Capacity: 240 liters Temperature rang (more)e: Ambient temperature plus 5°C to 300°C Integrated digital temperature display 2 shelves Power supply: 230V, Frequency: 50-60Hz, Power: 2700W, Interior dimensions: 80 x 48 x 59 cm Overall dimensions: 103 x 82 x 82 cm Weight: 93kg Tested at 200°C The electronic card is new (replaced on 10/11/22) Trace of rust inside

HERAEUS B12 incubator / oven with natural convection 70°C Model: B12 Capacity: 131 Liters Temperatur (more)e range: Ambient +5°C / +70°C Integrated digital temperature display 2 stainless steel shelves Power supply: 230V Frequency: 50-60Hz Power: 470W External dimensions (W) x (D) x (H): 69.6 x 54 x 85cm Interior dimensions (W) x (D) x (H): 55.2 x 39 x 61cm Weight: 55kg interior glass door (rust on the door hinges - see pictures) Tested at 37°C

Refrigerated oven / incubator with Peltier element MEMMERT IPP 200 / 70 ° C refrigerated incubator w (more)ith Peltier element Model: IPP 200 Capacity: 32 liters Temperature range: 0°C to 70°C IPP range of use: 5°C to 70°C Internal dimensions: (W) x (D) x (H): 40 x 25 x 32cm External dimensions: (W) x (D) x (H): 55 x 49 x 60 cm Made of zinc-plated steel 2 perforated stainless steel shelves, non-tilting 230V 50/60Hz 125W Weight: 33 Kg In excellent condition Tested at 4°C and 37°C

Thermo Neslab Merlin M25 Circulating Chiller Temperature range : +5 to +35°C Stability : ± 0.1°C Co (more)oling Capacity : 741w Capacity : 0.5 gallons, (1.8 liters) Length x Width x Height : 20.9 x 12.6 x 23.5 in (50.8 x 30.5 x 58.5 cm) Refrigerant : R134A Flow Rate PD1 Pump : 5.7 L/min Recommended for biotech, pharmaceutical, laser, laboratory, analytical instrumentation, printing, semiconductor, industrial, and medical use. Tested at 6°C

UVP Hybridization Incubator HL-2000 Temperature range: From room temperature +10°C to 99.9°C hybridi (more)zation oven Model: HL-2000 HybriLinker 2 independent devices in 1 Fixing on membrane by 254nm UV irradiation and hybridization Stainless steel interior Door with glass window protecting against ß emissions For long tubes. 300mm max Rotating wheel can hold up to twenty 35 x 150mm bottles and ten 35 x 300mm bottles at a time Membrane drawer with anti-UV viewing window In excellent condition Tested at 37°C

BINDER BD-240 incubator / oven with natural convection 100°C Capacity: 240 liters Temperature range: (more) Ambient temperature plus 5°C to 100°C Interior glass doors Integrated digital temperature display 2 grids (with slight traces of rust - see photos) Power supply: 230V, Frequency: 50-60Hz, Power: 680W, Interior dimensions: 80 x 48 x 59 cm Overall dimensions: 103 x 82 x 82 cm Weight: 93kg Tested at 37°C

Memmert BE600 incubator / oven with natural convection 70 °C Model : BE 600 Capacity: 256 liters Tem (more)perature range: +5 ° C to +70 ° C above ambient interior glass door Integrated digital temperature display 2 stainless steel shelves Power supply: 230 V Frequency: 50-60 Hz Power: 1600 W Interior dimensions: 80 x 50 x 65 cm Overall dimensions: 100 x 80 x 95 cm Weight: 87 kg Tested at 37 ° C