Furnaces

Carbolite Furnace Oven ELF 11/14 1100˚C Temp 3Kw Lab This item was removed from a university where i (more)t was surplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition internally and externally.

Mettler Toledo DO308 Karl Fischer Titration Drying Oven This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Carbolite GLM 1 Muffle Furnace This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and is in good working order (Max temp 1200˚C). It is in reasonably good cosmetic condition with minor marks.

Lenton Furnaces 1200˚C Tube Furnace This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition, with minor marks. Serial No. 4988Year 1996Eurotherm 808 Controller

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it  (more)was surplus to requirements. The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer. It is in reasonable cosmetic condition but has some dents.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order up to 1200˚C. It is in good cosmetic condition with minor marks.

Vacucell Evo 111 Double Compartment Vacuum Oven With Vacustation Lab This item was removed from a un (more)iversity where it was surplus to requirement. It is in excellent cosmetic condition and full working order. The previous client has stated that it was not used since its purchase in 2018. This item requires a Password for operation, which is available on request when purchased. Also includes the following: 1 x Vacuubrand Chemistry Hybrid RC 6 Pump- Full working order. 1 x Epson Printer- Full working order.

MEMMERT UN 450 incubator / oven with natural convection 300°C New equipment, never used In its origi (more)nal packaging. Year of manufacture: 2023 Heating and drying oven with universal adjustment Model: UN450 - new generation Capacity: 449 Liters Temperature range: Ambient +5°C / +300°C Integrated digital temperature display 2 stainless steel grids Power supply: 230 V Frequency: 50-60 Hz Power: 5800 W - three-phase External dimensions L(D) x H(E) x D(F): 1224 x 1247 x 784 mm (D +56mm excluding handle) Internal dimensions L(A) x H(B) x D(C): 1040 x 720 x 600 mm Weight: 161kg On castors with integrated brake Stainless steel wall sheets slightly deformed in a few small places

FISHER SCIENTIFIC FISHERBRAND DIEMOS ABV 175/80°C Drying Oven / Incubator with Forced Convection Dry (more)ing cabinet with motor-fan Capacity: 175 litres Vertical type External dimensions: (L) x (D) x (H): 69 x 71 x 103 cm Zinc-plated steel back Temperature range: 10°C above ambient temperature - up to +80°C 2 perforated stainless steel shelves Double doors (internet door and external door) 230 V 50/60 Hz 1000 W Weight: 70 Kg Tested at 37°C

Laboratory muffle furnace LBX 7L / 1200°C - NEW New Equipment Metal frame painted with epoxy resin I (more)nsulation chamber and interior chamber in ceramic fiber LED screen Temperature range: 100-1200°C Resolution: 1°C Internal dimensions: 300 x 200 x 120 mm External dimensions: 785 x 530 x 640 mm Weight: 50Kg Timer function (1 to 9999 min) manual safety lock on the door Light and sound alarm in case of overheating Automatic shutdown of heat emission by opening the door Disconnection of the oven due to thermocouple breakage. 220-240V / 50-60Hz 3000W

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

FIRLABO BCR240 refrigerated oven/incubator with forced convection refrigerated incubator FROILABO /  (more)FIRLABO Model: BCR 240 Capacity: 223 / 240 liters Temperature range: 0°C to 65°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 153 cm 4 perforated stainless steel shelves, non-tilting On self-locking casters 230 V / 50/60 Hz 1500W Weight: 114 kg Year of manufacture: 2005 Tested at 0°C and 37°C

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021

Universal oven / incubator MEMMERT UF55 / 300 °C NEW New equipment, in the original box. Max tempera (more)ture 300°C Temperature range: Ambient + 5°C -> 300°C With forced convection Capacity: 53 Liters 1 stainless steel grid Interior dimensions: 400 x 400 x 330 mm (LxHxD) External dimensions: 585 x 784 x 514 mm (WxHxD) 2000W / 220V Weight: 57 kg

Micro-evaporator, glass oven, BUCHI B-585 Kugelrohr For drying, distillation, freeze-drying and subl (more)imation of small quantities. Ideal for fractional distillation of small quantities of solvents up to 300°C. Model: B-585 Kugelrohr Temperature: +40...+300 °C Max capacity : 10 - 60 ml Rotation speed: 0 - 50 min⁻¹ W×D×H: 650×300×300 mm Weight: 11.5 kg Included : NEW cooling unit NEW glass ventilation valve Full iris diaphragm Delivered without ball tube Year of manufacture: 2012

APPLIGENE Hybridisation Incubator Hybrid Hybridisation Oven Hybridisation Oven Model: Hybrid 91 500W (more) RPM: 6 Stainless steel interior Door with glass window For tubes up to 300mm long Viewing window In excellent condition Tested at 37°C

Memmert IF75 incubator/drying oven with forced convection 80 °C New equipment in original packaging  (more)Model: IF 75 Capacity: 75 litres With cable passage on the left wall Temperature range: +5 °C (above ambient temperature) to +80 °C Inner glass door Integrated digital temperature display 2 perforated stainless steel shelves Power supply: 230V Frequency: 50-60Hz Power: 1250W Internal dimensions: 40 x 56 x 33 cm (W X H X D) Overall dimensions: 58.5 x 94.4 x 51.4 cm (W X H X D) Weight: 66 kg

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

The new Falc Instruments laboratory instruments improved the construction quality of the structure a (more)nd are completed with a touch screen panel. Falc laboratory ovens are widely used in thermostatic applications requiring high precision. These instruments are ideal for various operations, such as drying and sterilizing laboratory glassware, as well as for material strength testing. Depending on your specific needs, you can choose a model with or without ventilation, based on the level of accuracy required. Unlike incubators, laboratory ovens can reach high temperatures, up to 300°C. The characteristics of the new Falc models: - Touch screen display - 4 language setting - Digital timer - Program saving function - Programmable delayed start For over 50 years, Falc products have stood out for their solid and simple construction, guaranteeing durability and reliability over time. The new models have been updated with a touchscreen control panel, which simultaneously displays temperature, humidity and timer. The novelties and classics of the new Falc models: 1 - Silicone gasket: adheres perfectly to the door to maintain the set temperature, preventing heat loss and variations inside the chamber. 2 - Internal chamber made of 18/8 stainless steel. Exteriors in steel painted with anti-acid epoxy powder. Internal glass door for incubators only. 3 - Ø10mm upper hole for inserting thermometers or probes for instrument calibration. 4 - Touchscreen control panel with 4 languages ​​(Italian - English - French - Spanish) and safety class 3.1 as standard. The control's advanced functions include saving programs (temperature/maintenance/ventilation) and delayed start (day, time). 5 - Ergonomic handle with key lock. Falc chemical laboratory stoves represent the excellence of Made in Italy in the scientific instrumentation sector. Designed and manufactured with the utmost care, these stoves combine advanced temperature control technologies with rugged stainless steel construction, ensuring reliable, long-lasting performance. The double internal stainless steel chamber, combined with the pre-heating system in the pre-chamber, ensures excellent uniformity of the temperature inside. Various accessories and customization options allow you to precisely adapt them to any specific application. - Ø40mm chimney on the back for smoke exhaust/cable passage. - Chimney Ø40mm on the back, with shutter opening adjustable from the control panel with opening from 0 to 40mm. - Wifi module for remote monitoring via APP. - Shelves in perforated sheet metal. - Grid shelves. - Tables and trolleys.

The new Falc Instruments laboratory instruments improved the construction quality of the structure a (more)nd are completed with a touch screen panel. Falc laboratory ovens are widely used in thermostatic applications requiring high precision. These instruments are ideal for various operations, such as drying and sterilizing laboratory glassware, as well as for material strength testing. Depending on your specific needs, you can choose a model with or without ventilation, based on the level of accuracy required. Unlike incubators, laboratory ovens can reach high temperatures, up to 300°C. The characteristics of the new Falc models: - Touch screen display - 4 language setting - Digital timer - Program saving function - Programmable delayed start Why choose the STF-N 52T model? Being the most compact stove in the series, it adapts perfectly to your laboratory, taking up minimal space on the workbench and ensuring simple, clutter-free integration. For over 50 years, Falc products have stood out for their solid and simple construction, guaranteeing durability and reliability over time. The new models have been updated with a touchscreen control panel, which simultaneously displays temperature, humidity and timer. The novelties and classics of the new Falc models: 1 - Silicone gasket: adheres perfectly to the door to maintain the set temperature, preventing heat loss and variations inside the chamber. 2 - Internal chamber made of 18/8 stainless steel. Exteriors in steel painted with anti-acid epoxy powder. Internal glass door for incubators only. 3 - Ø10mm upper hole for inserting thermometers or probes for instrument calibration. 4 - Touchscreen control panel with 4 languages ​​(Italian - English - French - Spanish) and safety class 3.1 as standard. The control's advanced functions include saving programs (temperature/maintenance/ventilation) and delayed start (day, time). 5 - Ergonomic handle with key lock. Falc chemical laboratory stoves represent the excellence of Made in Italy in the scientific instrumentation sector. Designed and manufactured with the utmost care, these stoves combine advanced temperature control technologies with rugged stainless steel construction, ensuring reliable, long-lasting performance. The double internal stainless steel chamber, combined with the pre-heating system in the pre-chamber, ensures excellent uniformity of the temperature inside. Various accessories and customization options allow you to precisely adapt them to any specific application. - Ø40mm chimney on the back for smoke exhaust/cable passage. - Chimney Ø40mm on the back, with shutter opening adjustable from the control panel with opening from 0 to 40mm. - Wifi module for remote monitoring via APP. - Shelves in perforated sheet metal. - Grid shelves. - Tables and trolleys.