Yamato FO-710CR Muffle Furnace with Communication Port 23.6L, 220V

BINDER KB-53 refrigerated incubator / drying oven with forced convection 100°C Model: KB53 refrigera (more)ted and ventilated Capacity: 53 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 40 x 40 x 33 cm Overall dimensions: 64 x 84 x 58 cm Weight: 72 kg Year of manufacture: 2015 Tested at 37 ° C and -10 ° C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Carbolite Oven NRI-200F This item was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in reasonably good cosmetic condition.

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 90L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 90L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-402C Programmable Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for 1 of 6 Serosep EntericBio Heatstation.The unit is in full working condition and  (more)is ready for immediate release.AI AvatarEntericBio Heatstation: Essential for Gastrointestinal DiagnosticsThe EntericBio Heatstation is a crucial component of the EntericBio system, specifically engineered for the heat treatment of inoculated Stool Preparation Solution (SPS) tubes. This step is vital in preparing samples for molecular diagnosis of gastrointestinal infections.Key Features:Precise Temperature Control: The Heatstation operates at a consistent 103°C for 30 minutes, ensuring effective treatment of samples to inactivate pathogens and prepare nucleic acids for further analysis.Compact Design: With dimensions of 200mm (W) x 100mm (H) x 370mm (D), the Heatstation is designed to fit easily into laboratory workflows without occupying excessive space.Integration with EntericBio System: The Heatstation works seamlessly with the EntericBio Workstation, which automates the setup of reactions. This integration enhances productivity by streamlining the sample preparation process.High Throughput: The system can process up to 46 samples per run, providing a rapid solution for laboratories needing to manage large volumes of diagnostic tests.Performance:Rapid Results: The entire process, from sample treatment to result availability, can be completed within 3 hours. This speed is essential for timely diagnosis and treatment of gastrointestinal infections.Applications:The EntericBio Heatstation is specifically designed for:Molecular Diagnosis of Gastrointestinal Infections: Ideal for laboratories specializing in infectious disease diagnostics, it ensures accurate sample preparation for downstream analyses.

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

Arise Biotech EzMate 601s Automated Pipetting System This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and runs through calibration a self-tests without fault. There is no PC with the unit so we were unable to test it further. It is in good cosmetic condition with minor marks from use. Item does not include EzStarter Software or ACHM Control Box.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer The Heidolph 036110220 Hei-PLATE Mix 20L Magne (more)tic Stirrer was specially developed for applications with thermolabile substances. Because this model has no heating. The Hei-PLATE Mix 20L is ideal for applications up to 20 liters and can gently stir your solution in a speed range of 100 to 1,400 RPM. In addition, the rotation speed ramps up slowly until it has reached the desired value. This prevents splashes, uneven starts, or jumps of the stirring rod. The patented Kera-Disk® plate made of aluminum with a ceramic coating is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. This unit does not have a heating function Click Here to View Product Video INCLUDED: The Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty