Mettler Toledo KF-oven sample changer Stromboli

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37 ° C and -2 ° C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it  (more)was surplus to requirements. The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer. It is in reasonable cosmetic condition but has some dents.

Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V Operating Temperature Range 100°C t (more)o 1150°C Max. Temperature Reaching Time ~70min. Internal Capacity 9L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 9L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - Year Manufacturer's Warranty

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UN160PA Natural Convection Paraffin Oven 161L, 115V Setting Temperature Range +20°C to +80 (more)°C Setting Temperature Accuracy 0.1 °C Chamber Volume 161 L (5.7 cu. ft.) Features - Spacious 161 L (5.7 cu. ft.) internal volume for versatile storage - Temperature range from min. 5°C above ambient up to +80°C, with 0.1°C accuracy - Equipped with 2 Pt100 sensors for precise temperature monitoring and error handling - TwinDISPLAY control panel with adaptive multifunctional PID-microprocessor and high-definition TFT-color displays - Adjustable timer with digital backwards counter, customizable from 1 minute to 99 days - Natural convection and AtmoCONTROL software for efficient, programmable operation - Integrated AutoSAFETY and autodiagnostic system for enhanced safety and fault detection - Durable, nearly gas-tight stainless steel interior reinforced with deep drawn ribbing and protected heating The Memmert UN160PA Natural Convection Paraffin Oven 161L, 115V is designed to meet the highest demands for precision, safety, and flexibility in laboratory heating applications. Offering a spacious 161 L (5.7 cu. ft.) internal volume, this oven provides a wide temperature range from a minimum of 5°C above ambient up to +80°C, maintaining an accuracy of 0.1°C. Equipped with dual Pt100 sensors in a 4-wire circuit, the oven ensures precise temperature control with automatic error handling, guaranteeing uninterrupted performance. The advanced TwinDISPLAY control panel features an adaptive PID-microprocessor, supported by two high-definition TFT-color displays, enabling easy monitoring and adjustment. With natural convection and AtmoCONTROL software, the UN160PA allows for efficient programmable operation and seamless data management via USB or Ethernet. The integrated AutoSAFETY system with audible and visual alarms actively monitors temperature limits to prevent overheating, while an autodiagnostic system facilitates rapid fault analysis. Its durable stainless steel interior is nearly gas-tight and reinforced with deep drawn ribbing for optimal heating distribution, supporting loads up to 462 lbs. This oven combines precision and safety with an easy-to-clean design, making it ideal for laboratories demanding dependable performance and flexibility. INCLUDED: TheMemmert UN160PA Natural Convection Paraffin Oven 161L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Octet system enables real-time quantification or kinetic characterization of biomolecular intera (more)ctions. The Octet system is based on proprietary Bio-Layer Interferometry (BLI), a label-free and higly sensitive biosensor technology. Capabilities: Protein quantitation, Kinetic and affinity analyses, Binding specificity and cooperativity, Kinetic screening Sampling format: 96-well, black, flat bottom PP microplate Test volume: 200 µL , non-destructive and recoverable Sample types: Purified samples, common culture media, crude lysates Automation: Up to 8 biosensors in parallel, maximum of 96 tests unattended Optics: 8 channel biosensor manifold, Optical interferometer Sample plate platform temperature range: 2°C ​above ambient to 40°C Orbital flow: Staticor, 0 rpm or 100 – 1500 rpm Dimensions (HxWxD): 475 x 430 x 530 mm Weight: 23 kg

Sanyo MDF-U730M Biomedical Freezer Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Includes: 6 x Shelves - 62 x 62cm14 x Containers - 62 x 31 x 16cm

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.