Selecta Select-Horn

FIRLABO BCR240 refrigerated oven/incubator with forced convection refrigerated incubator FROILABO /  (more)FIRLABO Model: BCR 240 Capacity: 223 / 240 liters Temperature range: 0°C to 65°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 153 cm 4 perforated stainless steel shelves, non-tilting On self-locking casters 230 V / 50/60 Hz 1500W Weight: 114 kg Year of manufacture: 2005 Tested at 0°C and 37°C

LEEC F1 Glassware Drying Cabinet Warming Oven Lab This item was removed from a university where it w (more)as surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition.

This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks from use.

Yamato DG-800C Natural Convection Glassware Drying Oven 445L, 115V Temperature Range Ambient +5°C t (more)o 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural convection oven with large observation window for easy observation. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-800C Natural Convection Glassware Drying Oven 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF55 Forced Circulation Oven 53L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 53 L (1.87 cu.ft.) Features - Setting temperature range from +20°C to +300°C with a working range starting 10°C above ambient - 53 L (1.87 cu.ft.) internal capacity for versatile applications - Precise temperature control with 0.1°C resolution up to 99.9°C and 0.5°C from 100°C - ControlCOCKPIT with adaptive multifunctional digital PID-microprocessor controller and high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for precise airflow management - AtmoCONTROL software for data logging and program management via Ethernet interface or USB port - Fully insulated stainless steel door with 2-point locking and inner glass door for improved safety and visibility - Easy-to-clean stainless steel interior with large-area heating integrated on four sides The Memmert UF55 Forced Circulation Oven 53L, 115V is designed for precise and efficient temperature control, making it ideal for a wide range of laboratory applications. Equipped with the advanced ControlCOCKPIT digital PID-microprocessor controller and a high-definition TFT-color display, this oven provides a user-friendly interface for adjusting critical parameters such as temperature (in Celsius or Fahrenheit), fan speed, air flap position, and program time. The oven's working temperature range extends from a minimum of 10°C above ambient up to +300°C, with a fine resolution of 0.1°C up to 99.9°C, ensuring precise thermal management. Forced air circulation by a quiet, adjustable air turbine enhances airflow within the chamber, delivering uniform heat distribution throughout the spacious 53L (1.87 cu.ft.) interior capacity. The stainless steel interior, reinforced by deep-drawn ribbing and integrated large-area heating on four sides, ensures durability and easy cleaning. The Memmert UF55 also incorporates multiple safety features, including an adjustable electronic overtemperature monitor and mechanical temperature limiter, meeting DIN 12880 standards. The SetpointWAIT function ensures that the process time only starts once the set temperature is reached, guaranteeing accurate thermal conditions. For fresh air regulation, the oven features electronically adjustable air flap control in 10% increments, combined with a vent connection for efficient airflow management. With a fully insulated stainless steel door, two-point locking mechanism, and inner glass door for safe observation, the unit provides optimal protection and convenience. The oven comes with AtmoCONTROL software on a USB stick, allowing easy programming and data management via Ethernet or USB, making it a versatile addition to any laboratory. INCLUDED: TheMemmert UF55 Forced Circulation Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This listing is for a Analytical 200g Weight. The unit is in full working condition and is ready fo (more)r immediate release. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

Manufacturer: Varian Model: DS 102 Two-stage Rotary Vane Pump + Oil Mist Eliminator KF 25 949-9395 s (more)erie S/N: 219579 Description: Thanks to a very simple and highly reliable design, this field proven DS Series rotary vane pump provides excellent vacuum performance. The quality and manufacturing standards ensure that the DS rotary vane pumps provide high pumping stability for light gases, low noise, minimal oil backstreaming, and a long operating life. The pump’s two-stage design allows for low operating temperature, minimal backstreaming at low pressure and good pumping efficiency and gas ballast. It delivers a pumping speed of max. 114 liters per minute, low noise and a long operating life. It conforms to European Union directives (CE) and Restriction of Hazardous Substances (RoHS) requirements, and it is also UL and Canadian Standards Authority (CSA) approved. Oil Mist Eliminator KF 25 949-9395 serie is assembled at the outlet of the rotary pump and the main purpose is to purify the exhaust gases from oil mists. The use is advised for pumps which have to work for a long time at intake pressures exceeding 10 mbar, or with the ballasting tap open. Applications: - Analytical Instruments:Dual Stage Rotary Vane Pumps are practically the only primary vacuum pumps used on GC-MS and MALDI-TOF Instruments:GC-MS typically uses this small pump - the pump is needed to rough the system and back the high vacuum Turbo or Diffusion pump. MALDI-TOF depending on system size, uses the DS102 as roughing or interface pump.- Leak Detection:DS102 is typically used to back the Helium Mass Spectrometer Turbo or Diffusion pump.- Industrial Vacuum Processes:Vacuum coatings, Metallurgy Vacuum Furnaces, Lamps and TV Tube manufacture, Sterilizers, Freeze Dryers, Glove Boxes, High Speed Centrifuges, and Flywheels (for energy storage) represent the main Industrial applications for Dual Stage Rotary Vane pump. - High Energy Physics and Research Laboratories:In these applications the Rotary Vane pumps are mainly used in combination with Turbo pumps. The combination is typically used to rough and pump High Vacuum experimental chambers or to start Ion Pumps in ultra high vacuum systems.Features: - Dual Stage Pump:The two stage design allows low 10-3 mbar operation, low operating temperature, minimal backstreaming at low pressure, good pumping efficiency and gas ballast in the high 10-3 mbar region.- Forced Oil Circulation:The dedicated oil circulation gear pump ensures efficient and reliable lubrication of the pump from atmospheric pressure throughout the entire vacuum operating range.- Built-in Oil Shield:This feature minimizes the oil mist at the pump exhaust. Apart from drastically reducing the oil consumption over long periods of operation, this results in a reduction of air pollution limiting the impact on the environment. Specifications: Free air displacement:- 60 Hz: 114 l/min (4 cfm)- 50 Hz: 95 l/min (5.7 m3/h)Pumping speed:- 60 Hz: 3.5 cfm- 50 Hz: 5 m3/hUltimate partial pressure: 10-4 mbarUltimate total pressure: 2 x 10-3 mbarUltimate total pressure with gas ballast: 2 x 10-2 mbarWater vapor tolerance: 15 mbarWater vapor capacity: 60 g/hOil capacity min/max: 0.2/0.5 lMotor rating 1ph:- 60 Hz: 0.55 kW- 50 Hz: 0.45 kWNominal rotation speed:- 60 Hz: 1800 rpm- 50 Hz: 1500 rpmInlet flange: 25KF DNExhaust flange: 25KF DNOil Mist Eliminator's pneurop fitting: KF 25Oil Mist Eliminator's material: Nylon 30VF Items delivered: - Varian DS 102 Two-stage Rotary Vane Pump + Oil Mist Eliminator KF 25 949-9395 serie Condition: The whole item is in used but good condition. It is 100% functional tested and ready to be operated.

3 batches of 80 slides per 8-hour shift. Up to 60,000 samples per year with a single 8-hour shift. 8 (more)0 sample vials (two 40-vial trays) per batch. 2 cartridges of 100 ThinPrep 3000 microscope slides. 2 trays of 100 ThinPrep 3000 filters. 4 slide staining racks of 20 slides each. 122 cm wide x 71 cm deep x 158 cm high

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-28259 Thermo Scientific Additional Filter for Safety CabinetITEM-30044 GyroVapITEM-28251 Sanyo Centaur 2 ITEM-26081 Waters Manuals ITEM-26083 Box of E-Z Vial shelf packs ITEM-26084 Box of E-Z Vial shelf packsITEM-26033 Chloride Power ProtectionITEM-28297 Large glass tubesITEM-28302 Single Prep Accessories ITEM-28295 Titration flasks ITEM-28293 Spacelabs Medical Patient Monitor & ModulesITEM-10619 Chiayo M-200 Wireless Microphone Transmitter AV Equipment ITEM-26023 Kramer Tools VP-211K Automatic UXGA/Audio Switcher ITEM-26022 Kramer Electronics SierraVideo DISCITEM-11826 Fujitsu Lifebook FPCPR63Port Replicator Docking Station ITEM-13641 Creative Sound Blaster 4.1 Digital Sound Card With Manuals & Software ITEM-26045 Griffin pH Meter Model 50 ITEM-26018 Ryobi 18V battery ITEM-04647 2 x Sandstrom headsetsITEM-11767 Sharkoon Cable Remote Control for PC PC Jump StartITEM-26061 Sony controllers, adapters & transmitters ITEM-13731 Hewlett Packard Procurve 10Base T-Hub Network Hub ITEM-26013 Lot of tablet cases/covers ITEM-13917 APC Back-UPS CS 50ITEM-26014 Echo Capture Appliance ITEM-02460 CCTV Camera ITEM-04040 LG DVD/CD PlayerITEM-12443 Epson Perfection 1650 Flatbed Scanner IT Equipment ITEM-13309 1U Rack Mount Fan Unit For Audio Equipment AV Equipment ITEM-04641 Transact Ithaca Itherm 280 Thermal Receipt Printer USB ITEM-26011 Transact 280-SL Thermal Receipt Printer USB ITEM-26019 Lot of mice, various makes ITEM-26012 Dell Laptop Docking Station K09A001ITEM-26021 Kramer Electronics Directory of Products 2009/2010ITEM-26020 HP Deskjet 5400 Series Disc ITEM-26026 2x IP Control Unit 8450-02ITEM-28288 Cell Incubator & ControllerITEM-28300 Objectives 100/1.25 Oil, 160/0.17ITEM-28326 Zeiss Microscope PieceITEM-28296 Mixed lab glassware ITEM-28287 Howe sample holder ITEM-25955 APart SDQ5P Compact Speaker ITEM-26010 APart SDQ5P Compact Speaker ITEM-28298 Bio-Rad Sub-Cell Model 192 ITEM-28292 Mixed lab equipment for fluid dispersal ITEM-28291 Mixed lab glassITEM-28294 Fume Extractor (Top) ITEM-28290 Mixed spectrophotometer accessories ITEM-26062 2x Sony RM-LG1 ITEM-26015 Smart Technologies Sympodium ID350 ITEM-04310 Canon CanoScan LiDE 210ITEM-28289 Box of Hybaid HB-OV-BL ITEM-27902 Microscope ITEM-27894 Vickers Instruments Microscope ITEM-27896 Vickers Instruments Microscope ITEM-27901 Vickers Instruments Microscope ITEM-27890 Vickers Instruments MicroscopeITEM-27897 Vickers Instruments MicroscopeITEM-27900 Vickers Instruments MicroscopeITEM-27899 Vickers Instruments Microscope ITEM-27903 Vickers Zoomax MicroscopeITEM-27858 Hewlett Packard Lightwave Clock/Data Reciever ITEM-27860 Hewlett Packard 83446A Lightwave Clock/Data Receiver

Yamato WE-200 Pure Line Type 1 Water Purification System, 100-240V Pure Water Delivery Rate ~0.5 to (more) 1L/min Final Filtration 0.1μm Membrane Filter Water Quality Display Conductivity/Resistivity/Temperature Features - Suitable for high sensitivity trace analysis - Lower running cost - By adopting reverse osmosis (RO) membrane cartridge set, life span of consumables has been expanded significantly - Benchtop type, space saving - Easy water sampling by attaching to water faucet - Easy to operate digital display - Displays replacement of consumables and its exchange history - Standard equipped with membrane filter to protect pure water production from contamination - Electromagnetic valve equipped at sampling water port for leakage prevention - Universal power supply: works with 100-240VAC The Yamato WE-200 Pure Line is a benchtop water purification system which features an integrated reverse osmosis membrane cartridge to increase the life span of all consumables significantly. The standard equipped membrane filters additionally protect pure water production from contamination. It displays alerts for consumable replacements and keeps track of replacement history. The WE-200 produces ASTM type 1 deionized water and is suitable for high sensitivity analysis. INCLUDED: The Yamato WE-200 Pure Line Type 1 Water Purification System, 100-240V includes: - Supply & Drain Water Hoses - Pre-Treatment Cartridge - Reverse Osmosis (RO) Membrane Cartridge Set - Membrane Filter - Seal Tape - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).