Laboratory Modules

Rudolf Grauer Laborboy Boy-10a Router Lift Table Laboratory Lift Stand Tray dimensions: 20 x 20cm Mi (more)nimum Height: 9cm Maximum height: 29cm With signs of wear

Metrohm 838 Advanced Sample Processor for parts without caroussel Without Probe Without Software

METROHM 719 S Titrino Keyboard

Safety Bunsen Burner FIREBOY PLUS IBS Mobile Bunsen burner with two adjustment knobs for gas and air (more). Sensor activated ignition with nozzle for propane / butane L × W × H: 100 × 150 × 60 mm Weight: 1.3 kg

Millipore water purifier model elix 20 with flow of 400 liters / day Model : ZLXS50020 Daily Product (more) Water Usage : 400 l/day Nature of feed water : Current water Water quality : Type 2 Biological information: Microorganisms < 10 UFC/ml Physical-chemical information: Conductivity (µS/cm) < 0,2 µS/cm Flow rate (l/h) 20 l/h Flow rate 20 l/h Water resistivity 25°C > 5 MΩ·cm TOC of produced water < 30 ppb Dimensions Height : 734 mm Width : 662 mm Depth : 441 mm Operating weight : 45 kg Filter and membrane to change

WLD-TEC Laboratory Gas Burner Flame 100 Bunsen burner Measurements (w x h x d) (gas burner): 89 x 3 (more)4 x 88 mm Connected load (gas burner): 48 g/h liquid gas, 53 l/h natural gas (LL)48 g/h Width (gas burner): 89 mm Burner tube: removable, stainless steel Gas connection: 1/4'' Weight: 385 g Height (gas burner): 34 mm Power consumption: 2 VA Temperature threshold level: 0.66 kW liquid gas, 0.66 kW natural gas Power connection: 100 - 240 V / 50 / 60 Hz / max. 0.3 A 9 V DC / 1 A Button: Start-Stop

Barnstead D8611 EASYpure II UV/UF Water purification station TOC Monitor with UV Intensity Monitorin (more)g : No Resistivity: 18.2 Mohm.cm at 25°C Feed Water Source: Pretreated Total organic carbon: 1 to 5 ppb Conductivity: 0.055 µS/cm Flow rate: Up to 1 L/min. Bacterial content: <1 CFU/mL Electrical : 100-240 VAC Hertz : 50/60 Inlet Temp FC : 4°C to 40°C Particles > 0.2 µm/mL: <1 μM/mL Endotoxin concentration: 0.001 EU/mL Maximum Inlet Pressure psig : 6.9 bar Overall Dimensions : 48.3 x 43.4 x 30.5 cm Weight : 16kg Cartridges and filters need to be replaced because the equipment has been stopped for more than 6 months.

FISHER BIOBLOCK SCIENTIFIC Polystat 23 Tankless Immersion Circulator Reference POLYSTAT 23/86692

Safety Burner and Foot Switch IBS FIREBOY Plus Mobile Bunsen burner with two adjustment knobs for ga (more)s and air. Sensor activated ignition with nozzle for propane / butane L × W × H: 100 × 150 × 60 mm Weight: 1.3 kg

Mettler Toledo 405-DPAS-SC-K8S pH Probe New - never used

12 Olympus-racks carriers Hettich 4283-B Dimensions : 20x41x176 mm For swing-out rotor 4296, 2-place (more) Hettich

Hirschmann Pipetus Fifty pipetting aid 0.1ml to 200ml 5 suction speeds For graduated pipettes, volum (more)etric pipettes and Pasteur pipettes, from 0.1 ml to 200 ml Pipettor with NiMH Battery With 15V transformer Without the induction charging base. Charging only via the 15V charger

VELP spare Steam Generator 40001705 230V Udk149-139-129 For UDK 149 Automatic Kjeldahl Nitrogen Pro (more)tein Analyzer New - never used

Manufacturer: Witeg Model: Wisd WiseClean WUC A22H Ultrasonic Bath S/N: WUCA22H080414003 MFG date: (more) 2008 Description: The Wisd WiseClean WUC A22H Ultrasonic Cleaner is designed for chemical, biological, medical and pharmaceutical applications.The device was developed for simplest usage and a very long life.Ultrasonic sound of the cleaner when it is running is sound transmitted at frequencies generally beyond the range of human hearing. In your ultrasonic cleaner, ultrasonic sound (sonics) is used for cleaning materials and parts.This is how it works: As the sound waves from the transducer radiate through the solution in the tank, they cause alternating high and low pressures in the solution.During the low pressure stage, millions of microscopic bubbles form and grow.This process is called cavitation, meaning “formation of cavities”.During the high pressure stage, the bubbles collapse, or “implode” releasing enormous amounts of energy.These implosions act like an army of tiny scrub brushes.They work in all directions, attacking every surface and invading all recesses and openings. Key features and specifications: - long life by simply and solid construction- capacity: 22 liter- analog timer and temperature adjustment- frequencies: 40 kHz- drain valve - over temperature protection by safety switch- a lot of laboratory devices are mountable Items delivered: - Witeg Wisd WiseClean WUC A22H Ultrasonic Bath- Wire Basket B22- Stainless steel lid- Power cord- Operating Manual Condition: The Ultrasonic Cleaner is in very good cosmetic condition, though there are some slight traces of use (please see pictures), 100% functional tested and ready for your application.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Perkin Elmer Model: FlexDrop IV Precision Reagent Dispenser (Low Volume Systems) P/N:  (more)BSQLV41 S/N: S60101 (Jan. 2006) Description: The FlexDrop Precision Reagent Dispenser is a liquid handling system designed  for rapid dispensing of reagents, buffers, solvents and cells for high throughput assay preparation and compound  storage. Intended for use in pharmaceutical, biotech, research and clinical applications, FlexDrop systems  perform direct, non-contact dispensing into 96-, 384-, and 1536-well shallow and deepwell microplates. This small footprint  instrument easily fits into a laboratory biosafety or fume hood to ensure sterile containment and safe dispensing of  volatile reagents and solvents. Specifications: Model: FlexDrop IVReagent Capacity: 1 - 4Dispense Volume Range: 200 nL - 2 mLMicroplate Compatibility: 96-, 384- and 1536-wellDispense Head Configuration: 4 x 8 precision valvesDimensions: 9.5 in. (241.3 mm)including tubing: 12 in. (304.8 mm)Width: including side mounted bottles 21 in. (533.4 mm)Depth: including bottles 20 in (508 mm)Weight (approximate): 35 lb (15.9 kg)Electrical requirements: 110, 220, 240 Vac ±10%; 50/60 Hz; 350 VA Items delivered: - Perkin Elmer FlexDrop IV- including Bottles- Power Cord The Dispenser is in good cosmetic condition and fully working tested.Ready for your application.     Hersteller: Perkin Elmer Modell: FlexDrop IV Precision Reagent Dispenser (Low Volume Systems) P/N: BSQLV41 S/N: S60101 (Jan. 2006) Beschreibung: Der Perkin Elmer Flexdrop Präziosions Reagenz Dispenser (Abfüller) ist ein  Liquid-Handling-System für die schnelle Abfüllung entwickelt von Reagenzien, Puffer, Lösungsmittel und Zellen für die Assay mit hohem Durchsatz Vorbereitung und  Verbindung Lagerung. Vorgesehen für den Einsatz in pharmazeutischen, biotechnologischen, Forschung und klinische Anwendungen, funktionieren Flexdrop  -Systeme direkt, berührungslos in 96-, 384- und 1536-Well Mikroplatten.Dieses platzsparende Instrument passt problemlos in einem Labor oder  Labor-Dunstabzug um die sichere Abfüllung von flüchtigen Reagenzien und  Lösungsmittel zu gewährleisten. Technische Daten: Modell: IV FlexdropReagenzkapazität: 1 - 4Abfüll Volumen Bereich: 200 nL - 2 mlMikrotiter-Kompatibilität: 96-, 384- und 1536-WellDosierkopf Konfiguration: 4 x 8 PräzisionsventileMaße: 9,5 in (241,3 mm)einschließlich Schlauch: 12 (304,8 mm).Breite: einschließlich seitlich montierten Flaschen: 21 in (533,4 mm).Tiefe: einschließlich Flaschen 20 in (508 mm)Gewicht (ca.): 35 lb (15,9 kg)Elektrische Anforderungen: 110, 220, 240 V AC ± 10%; 50/60 Hz; 350 VA Lieferumfang: - Perkin Elmer FlexDrop IV Dispenser- inklusive Flaschen- Stromkabel Der Dispenser befindet sich in sehr guten Zustand und ist 100% auf Funktion  geprüft.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Mettler Toledo Model: Bohdan 2080.180 STRO MiniBlock Compact Shaking Washing Station w (more)/ Recirculator Manifold 2-Position and Lid P/N: M1279-0001 S/N: 200937753 Description: Mettler Toledo Bohdan 2080.180 STRO MiniBlock is a high performance orbital shaker with integrated basins for wash and rinse capability. Customized and configured to provide vigorous vortex mixing for up to 2 Mini Blocks. It is a heavy duty shaker built to rapidly agitate reaction blocks and heavy workloads. Features: - Compact Design- Digital Display- High-Speed Mixing Capabilities- Membrane Keypad Specifications: - Electrical: 230V, 50/60Hz, 1 PH, 80VA Items delivered: - Mettler Toledo Bohdan 2080.180 STRO MiniBlock Compact Shaking Washing Station- Mettler Toledo Recirculator Manifold 2-Position- Mettler Toledo Lid - Instruction Manual as PDF via E-Mail requestCondition: The item is in very good cosmetic as well as working condition. It is 100% functional tested and ready to be operated.

Manufacturer: Mettler Toledo Model: Bohdan MiniBlock Recirculator Manifold 2-Position + 4 Quick Dis (more)connect Hoses P/N: 13742045 Description: The item allows easy connection of Heat Transfer Blocks to a recirculator being mounted on the shaking station. Items delivered: - Mettler Toledo Bohdan MiniBlock Recirculator Manifold 2-Position- Mettler Toledo 4 Quick Disconnect Hoses Condition: The whole item is in very good cosmetic condition, 100% functional tested and ready to be used.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: IKA, Deutschland Modell: KMO 2 Basic Beschreibung: Kleiner, leistungsstarker Magnetrühre (more)r ohne Heizung. - Kräftiges Magnetfeld- Motor mit optoelektronischer Drehzahlregelung- Stufenlos einstellbare Drehzahl von 0 - 1.100 min -1- Edelstahlgehäuse erleichtert Reinigung und Sterilisation- Mit Gewinde M 10 für Stativstab H 16 V Lieferumfang: - IKA KMO 2 Basic- Stromkabel- Bedienungsanleitung als PDF via Mail Der Magnetrührer befindet sich in einem gebrauchten Zustand und ist 100% auf Funktion geprüft

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW