Mettler Toledo Bohdan MiniBlock Shaking Washing Station + Recirculator Manifold

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested (thermometer not included).It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order. The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.Therefore, it is listed as Spares/Repair. Also includes; 2 x Power leads3 x Gas feed hoses1 x Data cable

Minebea Intec Combics 2 Explosion Proof Scale Model CAW2S1-30ED-I Lab This item was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition and in working order. (The test calibration weight is not included.)

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition.

ELGA PURELAB Ultra IO MK2 Water Purifier Purification System This item was removed from a university (more) where it was surplus to requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. Also included are the following: 2 x Elga LabPure S1 Cartridges

Chemically resistant oil-free diaphragm vacuum pump used for a wide range of laboratory applications (more). It features PPS heads, PTFE lined diaphragms and FFPM valves. Technical features Flow rate (max.) 30 l / min Final vacuum (max.) 15 mbar (abs.) Pressure (max.) 0.5 bar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: PPS Applications Filtration Degassing Drying Fluid suction Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Small ecological footprint Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Ohaus heavy duty vortex agitators Robust construction and a top quality German-made motor for contin (more)uous operation with accessories across the entire speed range. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: switch A wide range of accessories is available for microtubes, microplates and tubes with sizes from 0.5 to 50ml. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Universal support (code 30400226) Cover for universal support (code 30400225) Foam insert (for 1.5-2.0 ml tubes) (code 30400217) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Structure Cycoloy, Touch / Standby / On rocker switch (both models) Construction features Universal holder with foam insert for (38) 1.5 to 2 mL tubes. Universal lid and cup head (included) Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

This Olympus IX50/Arcturus LCM2106 PixCell 2E Microdissection Microscope System was removed from a u (more)niversity lab where it was surplus to requirements. All parts are in good used cosmetic condition but they do have signs of general use. We have powered it all up and the system appears to function as it should. We were able to view a slide via the software on the PC. It is an excellent system and is in full working order. It has been professionally serviced. The comments from the service engineer are below. It appears to be in good working condition but we have no way of checking the laser. The internal halogen works fine and so does the external metal halide illumination. Objectives UPlanFl 4x/0.13 ∞/- UPlanFl 10x/0.30 ∞/- LCPlanFl 20x/0.4 ∞/- LCPlanFl 40x/0.60 ∞/- Diagnostic Inst 1x C Mount adaptor. Some evidence of bleaching of fluorescence filters. The system consists of: 1 x Olympus IX50 Microscope Modified by Arcturus.With PixCell IIE LCM2016 Laser System (Manufactured September 2002).The microscope is fitted with:2 x Olympus WH10X/22 Eyepieces. Olympus Objectives: 1 x OlympusLCPlanFl40x/0.60∞/ 1x OlympusLCPlanFl20x/0.40∞/ 1 x OlympusUPlanFl10x/0.30∞/ 1x OlympusUPlanFl4x/0.13∞/- 1 x ZEISSPlan-NEOFLUAR40x/0.75∞/0.17(not fitted in the microscope). 1 x Dell Dimension 3000 PC with keyboard, mouse & monitor.The PC has Arcturus ARC200 software installed and is fitted with a PCi card interface for the Hitachi camera. 1 x Olympus BH2-RFL-T3 Lamp PSU.It is showing 71.2 lamp hours. 1 x Olympus U-ULS100HG 100w lamp 1 x Hitachi KP-D590P CCD Color Camera. 1 x Camera Remote Unit. 1 x Arcturus PixCell IIe Control Unit. 1 x MARX Crypto-Box. 1 x Arcturus 12109-00D Sample holder. Various cables to connect the whole system. Manuals.

Fixed temperature: 350°C Power adjustable via load button Surface (WxD): 430 x 580 mm 380 V!

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 100 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW