LAUDA ECO Silver Heating Thermostat

Manufacturer: Binder Model: UF V500 Ultra Low Freezer (-40..-90°C) P/N: 9020-0347 Description: The  (more)BINDER ultra low temperature freezer ensures the safe storage of samples at -90 °C. It combines outstanding environmental friendliness with low energy consumption, convenient operation and an individual safety concept. Benefits - Lowest energy consumption in its class- Environmentally friendly refrigerant- Multi-level safety concept Important characteristics - Range of temperature controller: -90 °C to -40 °C- Lowest energy consumption in its class- Powerful cascade compressor cooling unit- Environmentally friendly refrigerants R-290 and R-170- Efficient thermal insulation with vacuum insulation panels- Innovative door gasket concept reduces buildup of ice- Ergonomic door handle- Rust-proof interior made completely of stainless steel- Detachable inner doors made of stainless steel- 3 stainless-steel shelves providing flexible placement- Water cooling (depending on version)- Zero-voltage alarm contact for in-house alarm system- Ethernet interface- Elapsed time indicato- 2 access ports, Ø 28 mm, rear Specifications:Performance Data Temperature Cooling down time from 22 °C to -80 °C: 360 minTemperature fluctuation at -80 °C: 1.5°CTemperature range: -90…-40Temperature variation at -80 °C: 2.5 °CWarm-up time during power failure from -80 °C / -122 °F to -60 °C / -76 °F: 230 minElectrical data Nominal power: 1.6 kWPhase (Nominal voltage): 1~Power frequency: 50 Hz Rated Voltage: 230 VUnit fuse: 10 AUnit doors: 1 Housing dimensions not incl. fittings and connections Exterior dimensions: (WxHxD) 938 x 1966 x 826 mm Interior dimensions: (WxHxD) 605 x 1300 x 606 mm  Interior volume: 477LNet weight of the unit (empty): 247kgPermitted load: 200kgPermitted load of individual compartment: 50kgWall clearance back: 100 mmWall clearance sidewise: 250 mmEnvironment-specific data Energy consumption at set-point -80 °C and ambient temperature = 21 °C: 7.9kWh/dSound-pressure level: 47dB(A) Number of shelves (std./max.): 3 / 13Load-variants Cryoboxes, 50 mm: 352Freezer racks per compartment: 4 Itemds delivered: - Binder UF V500 Ultra Low Freezer  - Instruction Manual The Binder UF V500 Freezer is new and has never been used in lab environment.Ready for it's first duty.

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN30PA Natural Convection Paraffin Oven 32L, 115V Setting Temperature Range +20°C to +80°C (more) Setting Temperature Accuracy 0.1 °C Chamber Volume 32 L (1.1 cu. ft.) Features - 32 L (1.1 cu. ft.) internal volume for compact, efficient use - Temperature range from +20°C to +80°C with 0.1°C accuracy - Dual Pt100 sensors ensure precise temperature monitoring and safety - TwinDISPLAY control panel with adaptive PID microprocessor and high-definition TFT-color displays - Natural convection system for stable, even heating without forced air - Programmable with AtmoCONTROL software for USB and Ethernet connectivity - AutoSAFETY system with over- and undertemperature alarms for protection - Fully insulated stainless steel door with secure 2-point locking system The Memmert UN30PA Natural Convection Paraffin Oven 32L, 115V is designed to provide precise and reliable temperature control for laboratory paraffin applications. With a 32-liter (1.1 cu. ft.) chamber capacity, this compact oven offers a controlled temperature range of +20°C to +80°C, accurate to 0.1°C, ensuring stability and consistency. Equipped with dual Pt100 sensors in a four-wire circuit, it guarantees optimal monitoring and safety by taking over in case of any sensor error. The TwinDISPLAY control panel, featuring a digital PID microprocessor and high-definition TFT-color displays, allows for intuitive and flexible temperature and timing adjustments, adapting easily to diverse laboratory requirements. Built for efficiency, the UN30PA employs a natural convection system that delivers consistent heat distribution without forced airflow, making it ideal for delicate paraffin processing. The unit is programmable through the AtmoCONTROL software, compatible with both USB and Ethernet, allowing easy data management and transfer. Safety features include the integrated AutoSAFETY system, offering visual and acoustic alarms for over- and undertemperature protection, as well as a fully insulated stainless steel door with a two-point locking system to maintain internal conditions securely. With its durable stainless steel construction and user-friendly functionality, this oven is a versatile and dependable solution for precise paraffin applications. INCLUDED: TheMemmert UN30PA Natural Convection Paraffin Oven 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Corepoint Scientific EF201WWW-0MHC -15C to -25C Hazardous Location Freezer Temperature Setpoint Rang (more)e -15°C to -25°C Capacity 20 Cu. Ft. Defrost Method Manual Features - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D, ensuring safe storage environments. - Utilizes ATEX and non-sparking components for enhanced safety, along with R291 refrigerant for efficient cooling. - Features a manual defrost system that helps maintain optimal cooling efficiency, requiring periodic attention to prevent ice build-up. - Provides 20 cubic feet of space, ideal for safely storing flammable or volatile materials with ease. - Equipped with a microprocessor temperature controller and a digital temperature display. - Includes a solid, right-hinged door with a magnetic gasket for a positive seal and a recessed handle. The Corepoint Scientific EF201WWW-0MHC Hazardous Location Freezer is meticulously designed to meet NFPA and OSHA guidelines for Class 1, Division II, Groups C & D environments, making it ideal for use in settings where volatile or explosive conditions may exist. This freezer offers a substantial 20 cu. ft. capacity, housed within a durable powder coat steel exterior, and utilizes a right-hinged, solid door with a magnetic gasket to ensure a robust seal.Equipped with six fixed shelves and recessed handles, this unit facilitates the organized storage of flammable or volatile materials, supported by high-density urethane foam insulation that ensures consistent and reliable temperature control. The microprocessor temperature controller with a digital temperature display allows for precise setting adjustments from -15°C to -25°C, enhancing the maintenance and recovery processes compared to traditional mechanical thermostats. INCLUDED: The Corepoint Scientific EF201WWW-0MHC -15C to -25C Hazardous Location Freezer includes: - 6 Fixed Shelves - Key for Door Lock - Operator's Manual - 2 Year Manufacturer's Warranty

See attached document for more information.

Hoefer PS300B Electrophoresis Power Supply Voltage 10 to 300 V in 1 V step Current 4 to 500 mA in 1  (more)mA steps Maximum Wattage 90 W Features - Constant voltage or constant current mode with automatic crossover - 10 to 300 V, 4 to 500 mA, 90 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS300B Electrophoresis Power Supply is a versatile and reliable solution for most electrophoresis techniques. Its compact design, large handle, and intuitive operation make it easy to integrate into any lab environment. Equipped with a large, easy-to-read LED display, the PS300B allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs effortlessly. With a range of 10 to 300 V and 4 to 500 mA, this power supply delivers up to 90 W of power, ensuring precision and adaptability for various applications. The PS300B features three distinct modes of operation: Constant Voltage Mode, where the power supply will attempt to maintain the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where the power supply will attempt to maintain the user-selected current flow by automatically adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to power supply operating limits, the power supply automatically switches to maintaining the other parameter. Key features include short circuit and open circuit protection, automatic recovery after power failure, and four 4 mm output jacks for flexible connections. Designed for both continuous operation and timed runs, the PS300B ensures reliable performance, making it an ideal choice for consistent, efficient electrophoresis procedures. INCLUDED: The Hoefer PS300B Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Balance of the AS X7 series is an advanced analytical weighing device of the SYNERGY LAB line. The A (more)S X7 is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X7 analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 7” diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X7 analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X7 balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called „human factor”. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X7 balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user's permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X7 balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: • Operators (max 100 entries), • Products (max 5 000 entries), • Weighings (max 50 000 entries), • Packaging (max 100 entries) • Formulations (max 100 entries), • Customers (max 1000 entries), • ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X7 balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS X7 balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Adam Equipment SAB 124E Solis Analytical Balance, 120g, 0.0001g Capacity 120g Readability 0.0001g R (more)epeatability 0.0002g Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Analytical and Semi-Micro Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. Solis models offer capacities from 120g to 510g and readabilities from 0.01mg/ 0.1mg to 0.0001g. The Solis Analytical and Semi-Micro Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment SAB 124E Solis Analytical Balance, 120g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty