Lauda Chiller LOOP 250

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 1200 model (measured with ethanol): - a 20°C, 1.20 kW - a 10°C, 1.00 kW - a 0°C, 0.70 kW - a -10°C, 0.40 kW - a -20°C, 0.18 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

Perkin Elmer C6 Chiller This was removed from a university lab where it was surplus to requirements. (more) The unit powers up but we were unable to test tit further. It is in good cosmetic condition with minor marks from use.

Thermo Scientific Versacool Chiller This item was removed from a university lab where it was surplus (more) to requirements. It is in good cosmetic condition and full working order. Does not include any additional cable or tubing.

Julabo FL2506 Recirculating Chiller Lab This item was removed from a university where it was surplus (more) to requirement. It is in good cosmetic condition and in good working order.

Julabo F1000 Recirculating Cooler Lab This item was removed from a university where it was surplus t (more)o requirement. The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included). It is in good cosmetic condition.

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, glass draft shield with top mounted side doors and flip / slide top door (1mg models), front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Ideal for most protocols calling for fast spins and quick spindowns Compact footprint and brush-less (more) motor for quiet operation and low vibration Select and set the digital speed display in RCF or rpm Sample imbalance and tilt safety cut out Safety interlock lid prevents opening while rotor is turning Back lit display showing time, speed and operational information on the same screen Quick-spin button for short spin requirements, press and hold to operate UV-Resistant plastic, increased useful life under harsh light conditions Double insulated, low voltage power supply Push button lid release Manual override allows user to open lid in case of power failure Capacity: 12 x 1.5/2.0 mL, 32 x 0.2 mL Dimensions (HxWxD): 114 x 171 x 203 mm Max. Speed: 12500 rpm Display: Color Graphic Display

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW