BioTherm BioOven III

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 1.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 1.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Meter multi-parameter Nanocolor 400 D. wavelength of 340 to 860 nm. Bandwidth of 10-12 nm. Detector  (more)photodiode. LCD Display. Output RS 232. Timer. Memory for 999 results. Manual. Specifications:

Memmert UN75plus Natural Convection Oven 74L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - 74L internal volume for versatile sample sizes - Precise temperature control from +5°C above ambient to +300°C for a wide range of applications - Equipped with TwinDISPLAY, featuring two high-definition TFT-color displays for advanced control - 2 Pt100 sensors in a 4-wire circuit for reliable temperature monitoring and control - Natural convection for uniform temperature distribution without forced airflow - Pre-heated fresh air admixture with electronically adjustable air flap for optimal temperature uniformity - Comprehensive safety features, including AutoSAFETY with over- and undertemperature monitoring - Easy-to-clean stainless steel interior reinforced by deep-drawn ribbing for durability and hygiene The Memmert UN75plus Natural Convection Oven 74L, 115V offers exceptional performance for temperature-sensitive applications, with a large 74L internal volume to accommodate a wide range of samples. This advanced laboratory oven features precise temperature control, with a working temperature range of +5°C above ambient up to +300°C. Its highly accurate 2 Pt100 sensors in a 4-wire circuit ensure consistent temperature readings, while the TwinDISPLAY digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive adjustments and real-time feedback. Designed for efficiency, the Memmert UN75plus includes natural convection for even heat distribution, as well as the option to adjust the airflow with an electronically adjustable air flap. The durable, easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing, ensures long-lasting performance and hygiene. Safety features such as the overtemperature monitor, mechanical temperature limiter, and integrated AutoSAFETY system protect against overheating, while the AtmoCONTROL software allows remote monitoring and data logging for precise control and documentation. INCLUDED: TheMemmert UN75plus Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN160 Natural Convection Oven 161L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 161 L Features - Large 161 L (6 cu.ft.) stainless steel chamber for versatile storage - Temperature range from +5°C above ambient to +300°C for diverse applications - 1 Pt100 sensor DIN class A in 4-wire circuit for precise monitoring - SingleDISPLAY digital PID-microprocessor controller with high-definition TFT display - Natural convection system for even heat distribution - Electronically adjustable air flap for controlled fresh air admixture - Supports up to 8 stainless steel grids with a max load of 463 lbs - Auto diagnostic system with electronic overtemperature monitor for reliable safety The Memmert UN160 Natural Convection Oven 161L, 115V is designed to meet versatile laboratory needs with a spacious 161 L (6 cu.ft.) stainless steel chamber that accommodates a variety of samples. With a precise temperature range from +5°C above ambient to 300°C, the oven is equipped with a Pt100 sensor DIN class A in a 4-wire circuit, ensuring reliable temperature control. The SingleDISPLAY digital PID-microprocessor controller provides easy adjustments via a high-definition TFT display, while the natural convection system maintains uniform heat distribution throughout the chamber. An electronically adjustable air flap allows controlled fresh air flow, and the oven supports up to 8 stainless steel grids with a maximum load capacity of 463 lbs. Safety is enhanced with an auto diagnostic system and electronic overtemperature monitor, making this oven an ideal choice for rigorous lab environments. INCLUDED: The Memmert UN160 Natural Convection Oven 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V Temperature Range Ambient +10°C to 2 (more)60°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 150L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 150L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corbett Research Rotor-Gene RG-6000 Real-time PCR Analyser This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and passes warmup sequences. It connects to the PC and communicates. It is fitted with a 100 disc with lockring. It is in very good cosmetic condition with minor marks. The system includes a Windows 7 Dell PC running Quaigen Rotor-Gene Q 2.4.3.

Leica DM 2500 trinocular microscope. Nikon 10x/26.6 eyepieces. Six position nosepiece. Four Nikon pl (more)an phase objectives including a E10x/0.25; 20x/0.4; 40x/0.65 and oil 100x/1.25. Phase contrast condenser with iris diaphragm and filter holder. Right-handed mechanical stage. LED illumination. User manual. The Leica DM2500 optical microscope is particularly suitable for applications requiring special contrast techniques, such as fluorescence or phase contrast, in fields such as pathology or biomedical research.

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

Refurbished Thermo Herasafe KS 18 Biological Safety Cabinet. 6 months warranty. Microbiological safe (more)ty cabinet HERAsafe KS 18, ergonomic safety cabinet class 2 according to EN 12469, for safe working in laboratory safety levels 1 to 3, with display in the working area and remote control for increased safety and contamination protection. The stand is included in the price. Delivery incl. new pre-filter and main filter