Memmert UN260plus Natural Convection Oven 256L, 115V

Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115VWhether you areworking with (more) Northern Blots, Southern Blots, Microarrays or another applicationthat requires incubation, you will find the Big SHOT III™ Hybridization Oven isa perfect fit for the job. Thisunit is designed to provide rapid heat-up, excellent temperature stability andefficient mixing for all types of hybridization and incubation applications. PID temperature controller for rapid heat up and excellent temperature stability Forced air convention Settable over temperature safety thermostat Programmable digital timer - up to 99 hours, 59 minutes Supplied with a standard carousel Carousel speed up to 60 RPM in 1 RPM increments Reversible door Stackable Easy to remove stainless steel drip pan 2 year warranty INCLUDED: The Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115V includes: - Standard Carousel - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase Operating Temperature Ra (more)nge 40 to 200°C Operating Pressure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 1000L Features - Vacuum pump can be installed inside the oven - Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance - Improved working efficiency as exhaust system is improved to significantly shorten the time to reach vacuum - Use specialized function menu key and up/down key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. - Self-diagnosis circuit (abnormal temperature sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc. - For safety, resin protection panel is installed at the observation window Large scale 1000L vacuum drying oven designed for treatment of large-sized parts. Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance. Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved. Use specialized function menu key and ▲▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. Vacuum pump can be installed inside the oven. Operating temp. range of 40~200° CINCLUDED: The Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase includes: - Stainless Steel Punching Plates, 4 pcs. - Power Cord - 1 Year Manufacturer's Warranty

Yamato FO-300CR Muffle Furnace with Communication Port 7.5L, 115V Operating Temperature Range 100°C (more) to 1150°C Max. Temperature Reaching Time ~70 min. Internal Capacity 7.5L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 7.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-300CR Muffle Furnace with Communication Port 7.5L, 115V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The new Falc Instruments laboratory instruments improved the construction quality of the structure a (more)nd are completed with a touch screen panel. Falc laboratory ovens are widely used in thermostatic applications requiring high precision. These instruments are ideal for various operations, such as drying and sterilizing laboratory glassware, as well as for material strength testing. Depending on your specific needs, you can choose a model with or without ventilation, based on the level of accuracy required. Unlike incubators, laboratory ovens can reach high temperatures, up to 300°C. The characteristics of the new Falc models: - Touch screen display - 4 language setting - Digital timer - Program saving function - Programmable delayed start For over 50 years, Falc products have stood out for their solid and simple construction, guaranteeing durability and reliability over time. The new models have been updated with a touchscreen control panel, which simultaneously displays temperature, humidity and timer. The novelties and classics of the new Falc models: 1 - Silicone gasket: adheres perfectly to the door to maintain the set temperature, preventing heat loss and variations inside the chamber. 2 - Internal chamber made of 18/8 stainless steel. Exteriors in steel painted with anti-acid epoxy powder. Internal glass door for incubators only. 3 - Ø10mm upper hole for inserting thermometers or probes for instrument calibration. 4 - Touchscreen control panel with 4 languages ​​(Italian - English - French - Spanish) and safety class 3.1 as standard. The control's advanced functions include saving programs (temperature/maintenance/ventilation) and delayed start (day, time). 5 - Ergonomic handle with key lock. Falc chemical laboratory stoves represent the excellence of Made in Italy in the scientific instrumentation sector. Designed and manufactured with the utmost care, these stoves combine advanced temperature control technologies with rugged stainless steel construction, ensuring reliable, long-lasting performance. The double internal stainless steel chamber, combined with the pre-heating system in the pre-chamber, ensures excellent uniformity of the temperature inside. Various accessories and customization options allow you to precisely adapt them to any specific application. - Ø40mm chimney on the back for smoke exhaust/cable passage. - Chimney Ø40mm on the back, with shutter opening adjustable from the control panel with opening from 0 to 40mm. - Wifi module for remote monitoring via APP. - Shelves in perforated sheet metal. - Grid shelves. - Tables and trolleys.

APPLIGENE Hybridisation Incubator Hybrid Hybridisation Oven Hybridisation Oven Model: Hybrid 91 500W (more) RPM: 6 Stainless steel interior Door with glass window For tubes up to 300mm long Viewing window In excellent condition Tested at 37°C

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 1999 Tested at 37°C and -2°C

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Branson CPX2800 Digital Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and c (more)reates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer with continuous ultrasonic operation. - Last stored parameters are recalled when unit is turned back on. - Controls are located above and behind the cleaning tank in an easily accessible control tower panel, and raised above the tank to avoid damage from cleaning solutions. - Convenient built-in pour drains are featured on .5- and .75-gallon models. Tank drains with valves are incorporated on models 1.5-gallon and larger. - Plastic body, chemical-resistant. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and ultrasonic duration. Bransonic baths completely remove flux and contaminants from such precision parts as PC boards, SMDs, quartz crystals, capacitors, and many others. Branson ultrasonic cleaners can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids. Bransonic CPX ultrasonic baths feature digital controls with power tracking capabilities to adjust for light or heavy loads, high/low power control, degassing and sleep mode. The CPX baths offer the following features:Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. The CPX degassing period can be set up to 99 minutes. Extended degas time periods allow for “beyond cleaning” applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. When cleaning delicate parts, the CPX allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. Click Here to View Product Video INCLUDED: The Branson CPX2800 Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

IKA Eurostar 400 Control Overhead Stirrer Speed Range 0/6 to 2,000 RPM Viscosity Max. 100,000 mPas (more) Stirring Quantity Max. 150 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Powerful laboratory stirrer for high viscous applications and intensive mixing for quantities up to 150 l (H2O). It automatically adjusts the speed within the range of 0/6 – 2000 rpm (two speed ranges) through microprocessor-controlled technology. Integrated safety circuits ensure automatic cut-off in anti-stall or overload conditions. Continuous comparison of shaft to desired speed is performed, and variations are adjusted automatically. This ensures constant speed even with changes in viscosities of the sample. The stirrer features a brushless DC motor with a rating input of 220 W and an output of 176 W, offering a maximum torque of 400 Ncm. It includes a digital TFT speed display, stepless speed control, and supports intermittent operation. The unit also has overload protection, push-through agitator shafts, and an error code display, ensuring quiet and reliable operation.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

MAS, the electromagnetic modules of high resolution are devices designed to be integrated into weigh (more)ing systems of the customer. Their compact design and in-built electronics stand for significant adaptation possibilities which guarantees that customer demands are met. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.1 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration, The module housing features the following interfaces: RS232 and USB type B. The measurements can be carried out using the weighing pan or an under-pan weighing system – solution requiring the load to be suspended beneath the module. In order to prevent negative influence of the ambient conditions onto the weighing result, it is recommended to install the module inside the customer's device (e.g. in a draft shield). The MAS module comes standard with a dedicated power supply. Dedicated software Dedicated freeware, the R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC . R Panel functionality has been implemented in RLab program as one of its numerous functions.