BINDER BD-240 incubator / oven with natural convection 100°C

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 1999 Tested at 37°C and -2°C

This Panasonic Electric Laboratory Oven Model - MOV-112-PE was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on, it was already set to 160˚c and it went up in temperature quickly. We were unable to change the setting so we let it run. The temperature reached 156˚c after around 10-15 minutes with the thermometer reading 150˚C. It reached 250˚C within an hour. It has the usual smells you would expect from this type of oven. The digital thermometer is not included. The item is in a reasonable, used cosmetic condition. Inside dimensions - D48 W45 H45cm2 Shelves - 43 x 43cm

This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks from use.

Lenton Furnaces 1200˚C Tube Furnace This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition, with minor marks. Serial No. 4988Year 1996Eurotherm 808 Controller

Memmert UN55plus Natural Convection Oven 53L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 53L Features - 53-liter chamber volume accommodates various sample sizes, enhancing lab versatility - Precise temperature control from +5°C above ambient to 300°C for sensitive applications - Ergonomic PID controller with high-definition TFT display for intuitive adjustments - Durable stainless steel interior and exterior, corrosion-resistant for rigorous use - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with adjustable air flap for temperature uniformity - Adaptive settings include programmable temperature, timer, and setpoint wait for workflow optimization - AtmoCONTROL software for data logging and remote monitoring via Ethernet - Easy-to-clean stainless steel interior with reinforced ribbing, ideal for frequent use The Memmert UN55plus Natural Convection Oven 53L, 115V offers exceptional precision and control for a wide range of laboratory applications. With a working temperature range from +20°C to +300°C, this oven ensures stable and uniform heating, ideal for sensitive sample preparation and material testing. Equipped with TwinDISPLAY, a state-of-the-art dual high-definition TFT-color display, the oven provides intuitive control of temperature, time, and air flap settings. The natural convection system guarantees gentle airflow and uniform heat distribution, making it perfect for delicate samples that require a stable environment. The oven’s interior, crafted from easy-to-clean stainless steel, is reinforced with deep ribbing for durability and even heat distribution. Safety and efficiency are core features of the Memmert UN55plus. It comes with 2 Pt100 sensors for precise temperature monitoring and dual overtemperature protection through an integrated mechanical and electronic system. The oven's AutoSAFETY feature adjusts the heating performance to maintain accuracy, while its SetpointWAIT function ensures that processes only begin once the desired temperature is achieved. Additionally, its programmable digital timer, with adjustable settings ranging from 1 minute to 99 days, offers workflow flexibility. With a 53L capacity, robust design, and advanced programming options, this oven is a reliable choice for laboratories focused on consistent, safe, and high-quality results.INCLUDED: TheMemmert UN55plus Natural Convection Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN260plus Natural Convection Oven 256L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 256 L (9 cu. ft.) Features - Internal volume of 256 L (9 cu. ft.), ideal for large capacity applications - Working temperature range from +5°C above ambient to +300°C, perfect for various laboratory tasks - Precise temperature control with a resolution of 0.1°C up to 99.9°C, 0.5°C from 100°C, ensuring accuracy - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays for easy monitoring and control - AutoSAFETY feature with integrated over- and undertemperature monitor "ASF" to ensure the safety of sensitive samples - Admixture of pre-heated fresh air via an electronically adjustable air flap for enhanced air circulation - Robust stainless steel interior with reinforced ribbing and integrated large-area heating for durability and hygiene - Maximum chamber loading of 661 lbs. with a maximum per shelf loading of 44 lbs., providing ample support for heavy-duty applications The Memmert UN260plus Natural Convection Oven 256L, 115V is designed to provide precise and consistent heating for a variety of laboratory applications. With a large internal volume of 256 liters (9 cu. ft.), it offers ample space for handling large batches or bulky materials. The oven operates within a temperature range of +5°C above ambient to 300°C, ensuring flexibility for both low and high-temperature tasks. The integrated TwinDISPLAY features a high-definition TFT-color display and a PID-microprocessor controller, allowing for easy adjustments and monitoring of temperature, airflow, and timing parameters. The oven’s two Pt100 sensors work in tandem for mutual monitoring, ensuring continuous temperature accuracy and reliability. Safety and efficiency are paramount in the design of the Memmert UN260plus. The oven is equipped with AutoSAFETY, which includes over- and under-temperature monitoring with the ASF system, providing immediate alerts for any temperature deviations. Fresh air admixture is optimized through an electronically adjustable air flap, ensuring uniform heating. The durable stainless steel interior is easy to clean, corrosion-resistant, and reinforced with large-area heating on four sides, making it perfect for rigorous use in demanding environments. With a maximum chamber loading capacity of 661 lbs. and high-quality construction, this oven is an ideal solution for laboratories requiring robust and reliable thermal performance. INCLUDED: TheMemmert UN260plus Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

External dimensions (WxDxH): 1196 x 616 x 1968 mm Internal dimensions (WxDxH): 1050 x 524 x 1742 mm  (more)Weight: 483 kg Min. quantity of exhaust air 10 times: 10 m³/h Pressure difference at 10 times: 5 Pa Differential pressure at 10-fold EK5/AK4: 5 Pa Floor load: 528 kg/m² Maximum load: 600 kg Max. load tray: 60.00 kg Collecting capacity bottom sump tray: 29 litres

This VSW HAC-300 Control Unit was removed from a university lab where it was surplus to requirements (more). The unit powers on and is in good cosmetic condition with minor marks from use. All knobs, dials and switches move freely and appear to be responsive to the unit. It was not tested further.

This Metertech Microplate Reader Model M960 was removed from a university lab where it was surplus t (more)o requirements. The item powers on with the plate door opening/closing and the lamp working. We were unable to test any further. The item is in a reasonable, used cosmetic condition and comes with a manual.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.