Incubators

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  Plexiglass windows door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard! - Inner chamber in aluminum for better heat transport.

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  plexiglass windows o the door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard!     Inner chamber in aluminum for better heat transport.

The Innova 44R refrigerated stackable shaker is designed for culturing a wide variety of organisms i (more)n flasks up to 5L. The cast iron triple-eccentric counterbalanced drive is specifically designed to support high-speed applications and heavy workloads – the design has stood the test of time for over 70 years and continues to enable scientists today. A water reservoir with drain allows for humidification of the chamber, whilst protecting the drive unit from any spills. The simple user interface allows for easy programming of speed, temperature, time and when installed, the photo-synthetic light bank. The VisioNize box can be added to enhance monitoring and adds notifications functionality. Regular servicing can be carried out on-site, allowing for minimized downtime. Programming steps/storable programs: 15/4 Steps per program: 15 Available program modes: Constant speed and temperature,  Programmable multi-steps, RS-232 communication port Temperature range: 20°C below ambient to 80°C Temperature uniformity: ±0.25°C at 37°C Speed range: 25 - 400 rpm with 25 mm orbit Timer: 0.1 – 99.9 h, continuous Platform size: 760 x 460 mm Dimensions (WxDxH): 1349 x 843 x 660 mm Weight: 257 kg Included plate adapters: 25x 250 mL flask holder 10x 100 mL flask holder 10x 50 mL flask holder 3x 1 L flask holder 3x 2 L flask holder

Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood  (more)Speed Range 150 to 1,350 RPM Temperature Range Ambient +5°C to 65°C Platform Size 290 x 258 mm Features - Used for research requiring rigid or gentle shaking on microtiter plates or test tubes - Includes safety features, ease of use, and increased efficiency - Insulated system prevents heat transfer from the motor, safeguarding samples - Suitable for the modular incubator system with variable temperature control up to 65°C - Medium-sized model with a load capacity of 5kg - Accepts 6 microtiter plates for increased throughput - 1.5mm vibration orbit for gentle mixing with small sample volumes - Analog process timer for unattended operation (1 to 120 minutes) - Acoustic alarm and automatic stop after the set time expires - Variable speed control (150 to 1,350rpm) via analog knob This Tritramax package includes one vibrating platform shaker Titramax 1000, one heating module and one flat incubator hood. Titramax 1000, the incubating model platform shaker, is used for research which requires ridged or gentle shaking for small samples on microtiter plates or test tubes. Includes all standard features for safety, ease of use and increased efficiency. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control of up to 65° C. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. It is a medium sized model and accepts load capacities of 5kg. The use of 6 microtiter plates increases your throughput by 50%. The 1.5mm vibration orbit performs gentle mixing with best results using small sample volumes. The analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped. Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350rpm. The small incubator hood comes with a total height of 163mm and is recommended especially for microtiter plates, culture plates, small flasks, media bottles and Erlenmeyer flasks up to 100ml. The transparent and non-fogging PETG material allows for sample viewing and is easily cleaned. Click Here to View Product Video INCLUDED: The Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood includes: - Titramax 1000 Shaker - Heating Module - Flat Hood - Power Cord - Three Year Manufacturer's Warranty

Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V offers precise temperature control for a wide range of laboratory applications. With a temperature range from 0°C to +70°C and a setting accuracy of 0.1°C, this incubator ensures reliable and consistent results. Its energy-saving Peltier heating/cooling system is designed for efficiency, while the advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display makes operation intuitive. The SetpointWAIT function ensures that processes begin only once the set temperature is reached, providing additional accuracy and peace of mind. This 32-liter incubator features a corrosion-resistant stainless steel interior and a textured stainless steel exterior, ensuring durability and long-lasting performance. The unit is equipped with an adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety, while the autodiagnostic system offers fault analysis. With a maximum chamber load of 132 lbs and support for up to three shelves, the IPP30 is designed to handle a variety of samples, making it an ideal solution for laboratories that require precise, reliable, and energy-efficient incubation. INCLUDED: The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Thermo Scientific MaxQ 5000 Refrigerated Shaking Incubator This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation. It is in good cosmetic condition with marks from use. Internal dimensions - L86 W56 H47cmShaker Platform - 76 x 46cm

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and heats, but does not cool or shake. It is sold for spares/repairs.

Heraeus BB 16 Function Line CO2 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks.

Boekel Scientific 165000 Refrigerated Incubator, 115VThe Boekel Scientific165000 Refrigerated Incuba (more)tor has an easily viewable, bright color touchscreenthat displays alarms, current temperature, and the humidity level. The user caneasily control and define temperature programs, alarm setpoints and control theinternal power outlet based on time. The user interface was carefully designedto be intuitive and easily readable. The display can show temperature andhumidity graphs and this data can be downloaded to a USB drive or through anEthernet connection. The Boekel Scientific 165000 Refrigerated Incubator isideal for standard microbial work or low temperature work such as BOD testing,Drosophila,and extremophile bacteria culture because of the high-efficiency thermoelectriccooling. The unit can also add humidity to the chamber with the includedhumidity pan. Click Here to View Product Video INCLUDED: The Boekel Scientific 165000 Refrigerated Incubator, 115V includes: - Internal Outlet - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Panasonic MIR-154-PE Cooled Incubator Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally. Specifications. - Model: MIR-154-PE - SN: 12060103

This item has just arrived in our stock. Please enquire for further details.

Heraeus Function Line Incubator Type-B12 This item was removed from a university where it was surplu (more)s to requirement. The unit powers up and is in good working order. It is in good cosmetic condition.

Heraeus B5060 EK CO2 Incubator This item was removed from a university lab where it was surplus to r (more)equirements. The unit is in good clean condition with intact feet and a door seal and catch in good condition. It powered on, and the controls and digital displays were functioning as intended.The unit powers up and is in good working order (thermometer & CO2 analyser not included). CO2 stabilised at 5%. Specifications: - Internal Dimensions: L 60cm x W 51cm x H 55cm - Five shelves fitted - No UV lamp fitted - Over temperature cut-off working No further testing carried out. Model: B5060 EKSerial No: 8607594

This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator.The unit is in full working conditi (more)on and is ready for immediate release.The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications:Key Features:Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures.Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions.Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment.Advanced Contamination Control:Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties.Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity.Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions.Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options.Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation.Technical Specifications:Model: SCO5APart ID: SCO5AExterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm)Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm)Volume: 5.0 cu.ft. (142 L)Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm)Unit Weight: 200 lbs (91 kg)Interior Metal: 300 Series Stainless SteelExterior Metal: Painted Cold Roll SteelOperating Temperature Range: Ambient +5°C to 60°CTemperature Uniformity (Midrange): ±0.25 °CTemperature Stability (Midrange): ±0.1 °CController Type: DigitalDisplay Resolution: 0.1 °CPower Requirements: 110-120 VAC, 50/60 Hz, 6.0 AmpsSafety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE