Easily list your scientific equipment
Top suppliers for laboratory & industry
New and used instruments
Memmert IN30 Natural Convection Incubator 32L, 115V
Temperature Range
At least 5°C above ambient to +80°C
Convection Type
Natural Convection
Chamber Volume
32 L
Features
- 32 L (1 cu.ft.) stainless steel chamber for compact sample storage
- Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient
- 1 Pt100 sensor DIN class A in a 4-wire circuit ensures precise monitoring
- ControlCOCKPIT with SingleDISPLAY, featuring an adaptive digital PID-microprocessor controller with high-definition TFT display
- Natural convection system for consistent temperature distribution
- Electronically adjustable air flap for pre-heated fresh air admixture
- Max chamber load of 132 lbs for high-capacity sample handling
- Autodiagnostic system with adjustable overtemperature monitor for added safety
The Memmert IN30 Natural Convection Incubator 32L, 115V is a reliable, compact solution for precise temperature control in laboratory applications. With a 32 L (1 cu.ft.) stainless steel chamber, this incubator is designed to handle diverse sample needs within a temperature range from at least 5°C above ambient to +80°C. Equipped with a highly accurate Pt100 sensor DIN class A in a 4-wire circuit and the ControlCOCKPIT SingleDISPLAY digital PID-microprocessor, adjustments are easily managed on its high-definition TFT display. The natural convection system ensures uniform temperature distribution throughout the chamber, while an electronically adjustable air flap allows pre-heated fresh air flow. The incubator supports a maximum chamber load of 132 lbs and incorporates an autodiagnostic system with adjustable overtemperature monitoring for dependable performance and safety.
INCLUDED:
The Memmert IN30 Natural Convection Incubator 32L, 115V includes:
- 1 Stainless Steel Grid
- Tilt Protection Wall Bracket
- Calibration Certificate
- Power Cord
- Operator's Manual
- Manufacturer's Documentation
- 3 Year Manufacturer's Warranty
Setting Temperature Range | +20 to +80 °C |
Working Temperature Range | At least 5°C above ambient temperature to +80 °C |
Volume | 32 L (1.1 cu.ft.) |
Setting Resolution (temperature) | 0.1 °C |
Temperature Sensor | 1 Pt100 sensor DIN class A in 4-wire-circuit |
Control Panel | ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display |
Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Function SetpointWAIT | Process time does not start until the set temperature is reached |
Calibration | Three freely selectable temperature values |
Adjustable Parameters | Temperature (Celsius or Fahrenheit), air flap position, timer |
Convection | Natural convection |
Fresh Air | Admixture of pre-heated fresh air by electronically adjustable air flap |
Vent | Vent connection with restrictor flap |
Data Logging | AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand) |
Temperature Control | Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature |
Autodiagnostic System | For fault analysis |
Door | Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door |
Shelving | 1 stainless steel grid, electropolished |
Works Calibration Certificate | Includes works calibration certificate for +37°C |
Interior | Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides |
Max. Number of Shelves | 3 |
Max. Loading of Chamber | 132 lbs |
Max. Loading per Shelf | 44 lbs |
Housing | Rear zinc-plated steel |
Set Up | Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances |
Interior Dimensions (WxHxD) | 15.7 x 12.6 x 9.8 inches |
Exterior Dimensions (WxHxD) | 23 x 27.7 x 17.1 inches (d +2.2” door handle) |
Net Weight | Approx. 106 lbs |
Gross Weight (Carton) | Approx. 142 lbs |
Electrical Data | 115 V, 50/60 Hz, approx. 800 W / 7 A |
QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.