Binder KB240 Kühlbrutschrank Cooled Refrigerated Incubator Inkubator 240L

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

LMS 400NP Cooled Incubator This item was removed from a university where it was surplus to requireme (more)nt. The incubator is in excellent cosmetic condition and powers on.However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C. Therefore, it is listed as Spares/Repair. Specifications: - Serial No.: 12425/17PP - Capacity: 450 litres - Internal dimensions: 64 x 55 x 118 cm (l x w x h) - Temperature range: -10°C to 50°C - 4 height adjustable shelves (56 x 60 cm) - Factory set auto defrost system

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surpl (more)us to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation. It is in good cosmetic condition with minor marks. Internal dimensions are: L41cm x W41cm x H60cm.

Benchmark Incu-Shaker 10LR Shaking Cooling IncubatorFeatures - Exceptional temperature uniformity an (more)d accuracy - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10LR is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platformis also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10LR Shaking Cooling Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Biohit Model: mLINE mechanische Pipette, 1 Kanal m 10 0,5-10 µl P/N: 725020 S/N: 125955 (more)85 Beschreibung: Die mLINE ist Biohit fortschrittlichste mechanische Pipettenfamilie. Sie bietet einzigartige Ergonomie, Leistung und Sicherheit beim manuellen Pipettieren. Sie wurde besonders für wiederholtes und lange dauerndes Pipettieren entwickelt, um arbeitsbedingte Verletzungen an Händen, Armen und Schultern sowie RSI (Repetitive Strain Injury) zu verhindern. Die mLINE wird immer wieder von Gesundheits- und Sicherheitsbeauftragten auf der ganzen Welt empfohlen. Leistungsmerkmale: - Exzellente Ergonomie, die vor Verletzungen schützt, äußerst leichte Pipettier- und Spitzenabwurfkräfte- Hohe Genauigkeit und Präzision, auch während repetitivens und langwährenden Pipettierens- Minimiertes Kontaminations-Risiko mit Safe-Cone-Filtern und voll autoklavierbar- Verbesserte Sicherheit mit Volumensperre, verhindert versehentliche Volumenänderungen während des Pipettierens Technische Daten: - Produkt Familie: mLINE- Pipettentyp: Mechanische Pipetten, einstellbares Volumen- Primärer Produkttyp: Pipetten- Kanäle: 1- Volumen: 0,5 – 10 µL- Maße (BxTxH): 280 x 85 x 45 mm Lieferumfang: - Biohit mLINE mechanische Pipette, 1 Kanal m 10 0,5-10 µl OVP- Accessoires (s. Bilder)- Gebrauchsanleitung Biohit mLINE mechanische Pipette ist in neuwertigem Zustand, in Originalverpackung und vollkommen funktionsfähig.

Vertical elektroforesesystems, kuroGEL Verti 1824K

Effective and Excellent Measurement The NANO.AK-4/500.5Y automatic nano mass comparator enables dete (more)rmining mass deviations of weights with the minimum possible operator participation. The comparator allows to compare weights of mass ranging between 0.05 mg to 500 mg. Excellent Measurement Repeatability NANO.AK-4/500.5Y automatic nano mass comparator, due to the elimination of the human factor, temperature changes and air drafts, guarantees excellent measurement repeatability when compared to manual mass comparator. Design and Functionality An element that controls mass comparator operation is a digital management module, which is placed inside comparator’s chamber along with an automatic mass standard feeder. Mass comparator is operated by means of indicator connected to the comparator controller. Control elements are not mechanically integrated with the construction thanks to what the influence of ambient conditions on mass comparator chamber is significantly reduced. Dedicated Software Specially designed RMCS computer software enables comprehensive realisation of calibration procedures in laboratory. The system manages the whole calibration process, starting from the moment the order is placed, through proced

Benchmark TubeRoller with 10 Rollers Motion Simultaneous Roll & Tilt (± 5°) Speed Variable, 2 to (more) 80 RPM Load Capacity 8.8 lb. (4 kg.) Features - Designed for thorough mixing of a variety of containers, including vacutainers, bottles, test tubes, centrifuge tubes, and roller bottles - Gentle rolling motion - Smooth 5° tilting notion - Accepts tubes and bottles from 8mm to 200mm - Dual platform accessory doubles work surface - Ideal choice for research, clinical laboratories, and doctors’ offices Benchmark TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers™, bottles, test tubes, centrifuge tubes, and roller bottles. Both models feature variable speed control (2-80 rpm), suitable for the broadest range of mixing applications. As the roller mechanism rotates through each complete revolution, the right side of each roller is gently elevated about 0.5 in (13mm) and returns to the horizontal starting position. This additional, gentle up/down motion provides a “wave” effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built-in tilt feature provides a level of homogeneous mixing uniformity that cannot be matched by any stationary roller apparatus. From blood collection tubes to roller bottles, Benchmark TubeRollers are the ideal choice for research, clinical laboratories, and doctors’ offices. INCLUDED: The Benchmark TubeRoller with 10 Rollers includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty