Lab Incubator ICT 52 FALC

Temperature range: Ambient +4°C to 50°C Temperature increment: 0.1°C Temperature stability (at 37°C) (more): ± 0.1°C Temperature uniformity (at ambient 20°C – 25°C): ± 0.3°C CO₂ range: 0.2 – 20% CO₂ increment: 0.1% CO₂ stability (at 5%):  ± 0.2% CO₂ uniformity: ± 0.1% Required gas pressure: 0.05 MPa (0.5 bar/7.2 psi) Relative humidity control (at 37°C): 95% Relative humidity reservoir capacity: 2.5 L Capacity total/usable: 165 L/126 L Dimensions (WxHxD): 708 x 845 x 701 mm Internal dimensions (WxHxD): 539 x 692 x 444 mm Weight: 81 kg

Excella E25 Incubator Shaker Series Lab This item was removed from a university where it was surplus (more) to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V Temperature Range Ambi (more)ent +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 318L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 318L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V includes: - 4 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1400ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1400ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1400ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 449 L (15.8 cu. ft.) Features - Setting temperature range from -12°C to +60°C - 449 L capacity for various laboratory applications - Equipped with inner glass door for visibility without compromising insulation - Precision temperature control with 2 Pt100 sensors, accuracy to 0.1°C - ControlCOCKPIT with TwinDISPLAY for easy programming and monitoring - Air jacket heating system ensures gentle and uniform all-around heating - Integrated AutoSAFETY with over- and undertemperature protection - Energy-efficient CFC-free cooling system with automatic defrosting The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V is designed to deliver precise and reliable temperature control, with a setting range from -12°C to +60°C, making it ideal for sensitive applications that require exact environmental conditions. This 449 L capacity incubator features an inner glass door, allowing for clear visibility while maintaining insulation. TwinDISPLAY technology on the ControlCOCKPIT provides adaptive digital PID-microprocessor control with high-definition TFT-color displays, enabling seamless adjustments of temperature, fan speed, and program settings. With advanced safety features such as AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and dual Pt100 temperature sensors for accuracy to 0.1°C, the ICP450 offers optimal reliability. Its energy-efficient CFC-free cooling system includes an air jacket heating concept, ensuring gentle and uniform heating throughout the chamber. The incubator is equipped with AtmoCONTROL software for easy programming and data management, making it an exceptional choice for labs requiring consistent and versatile temperature management. INCLUDED: The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

System consists of: Jasco UV-1570M Intelligent UV Detector Jasco LG-1580-02 Ternary Gradient Unit Ja (more)sco PU-1580 Intelligent HPLC Pump Jasco AS-1555 Intelligent Sampler 2 Alltech Elite Degassing System PC

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

PS.R1 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. New PS.R1 balances like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm. Balances with a smaller pan have a draft shield. They were equipped with the system of external mass adjustment. PS.R1 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). . Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard: Database – a direct access to databasis Function - a direct access to the basic functions F1 to F4 – programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The MW-04-2 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, RS485. The MW-04-2 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-2 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, RS485 may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-2 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

Benchmark Roto-Therm Incubated Rotator with Tube Holders Benchmark’s new Roto-Therm series of incuba (more)ted rotating mixers provide a wide range of mixing capabilities. Suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization etc, the mixers include interchangeable tube holders for accomomodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. For applications requiring temperature control, the Roto-Therm series can be digitally programmed to maintain chamber temperatures of ambient +5C to 60C and include an “in-lab” calibration function for ensuring accurate temperature control. Included tube holders hold capacities of 11 x 1.5/2ml, 5 x 5-7ml, 5 x 10/15ml, and 6 x 50ml with 24 x 0.5ml.Click Here to View Product Video INCLUDED: The Benchmark Roto-Therm Incubated Rotator with Tube Holders includes: - Tube Holder, 11 x 1.5/2.0ml - Tube holder 5 x 5-7ml - Tube holder, 4 x 10-15ml - Tube holder, 6 x 50ml - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty