BioRad ID-Incubator 37 S I

FISHER SCIENTIFIC AU125 universal oven / incubator / 200 °C / 125 Litres Maximum temperature: 200 °C (more) Temperature range: Ambient + 5 ° C -> 200 ° C With forced convection FISHERBRAND Capacity: 125 Litres 2 perforated stainless steel shelves Approximate interior dimensions: 500 x 500 x 470 mm Approximate exterior dimensions: 700x 700 x 800 mm (WxHxD) 1500 W / 220V Tested at 50 ° C / 100 ° C / 150 ° C It must be set to 156 ° C to have 150 ° C. It is therefore necessary to add 4% to the desired value. (for example to have 105°C you have to put 109°C) In terms of linearity and fluctuation, it is very good, the temperature fluctuates by more or less 0.3°C light traces inside and the stainless steel exterior walls

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator All items are in good cosmetic condition wit (more)h minimal wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

PHCBI Cooled Incubator Model Type MIR-154 Labs This item was removed from a university where it was  (more)surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally. This item requires a passcode to operate, which is available on request.

Baker Hypoxycool Culture Media Hypoxia Conditioner This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside. It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility. Internal dimensions 38 x 38 x 30cm (LxWxH)

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks.

This listing is for a Olympus CH MicroscopeIn 1976, Olympus launched the CH Series, modular biologic (more)al microscope series for practical laboratory teaching applications, in place of the KHS, KHC, HSB, and HSC.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Olympus BX51 WIF Fluorescence Microscope System was removed from a university lab where it was  (more)surplus to requirements. The System unfortunately is largely untested as the lab was unable to part with the PC and software. They implied that it was in working order prior to having the PC removed as it was just surplus to requirements, but there are some parts missing. Overall it is in good cosmetic condition but has general marks from use. Details; 1 x Olympus MicroscopeModel - BX51WIF 2 x Olympus Eye pieces - WH15X/14 2 x Objectives:-Olympus LUMPlanFI/IR 40x/0.80 W ∞/0Olympus Plan N 4x/0.10 ∞/-/FN22 Olympus LampModel U-LH100IRSN - 6F24822 There is no power supply for the lamp, we used one from another item (not included) to test the light which was working, tested with one of our slides and was able to focus. Q Imaging optiMOS sCMOS cameraCooled Mono 16 BitSN - Q41501Lens - Olympus U-CMAD3/Olympus U-TV1X-2Filter - HQ535/50 M 203616There is no power supply cable for the camera. Newport RG Breadboard Optics TableModel - VH3036W-OPTDimensions - D76 W90 H80cm Faraday Cage Dimensions - D78 W88 H90cmThe cage is in reasonable condition but has a few holes. Table & Cage combined dimensions - D77 W90 H170cm Scientifica Stage/PlatformDimensions - D34.5 W60.5 H20.5cm Power supply for Patch Clamp Micromanipulation System:-Burleigh PCS-PS60Powers on 2 x Burleigh PCS 5000 Series ControllersSN - 0011431 & 0011420 2 x Burleigh PCS 5000 Series MicromanipulatorsBurleigh TS - 5000 - 150 Other parts/accessories include:-Unknown Part SN - 1270Prior partHi-lo Nitrogen 10 Bar gas RegulatorVarious small bits including crocodile clips and tubing

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.