UVP Hybridization Incubator HL-2000

FIRLABO BCR240 refrigerated oven/incubator with forced convection refrigerated incubator FROILABO /  (more)FIRLABO Model: BCR 240 Capacity: 223 / 240 liters Temperature range: 0°C to 65°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 153 cm 4 perforated stainless steel shelves, non-tilting On self-locking casters 230 V / 50/60 Hz 1500W Weight: 114 kg Year of manufacture: 2005 Tested at 0°C and 37°C

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Possibility to set ramps with module and RS232 port (4 programs of 8 steps)     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-AR FALC laboratory incubator

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Technical Specifications - ISWV02HDG - Uniformity: ±0.5 to 37°C - Drive system: stepper motor - Safety Certification: CE; TUV - Speed ​​Accuracy: ±1 rpm - Timer: 1 second to 160 hours Not sure which agitator to choose? Download the Incubator Shaker Selection Guide to get a quick overview of all available models.

Binder ED23 Drying And Heating Laboratory Oven This was removed from a university lab where it was s (more)urplus to requirements. The item powers on but the displays "error" after a short whilethat prevents the item from being tested. It is in very good cosmetic condition. It is sold for spares/repairs.

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 This was removed from a university lab w (more)here it was surplus to requirements. The unit has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. 2 Shelves - 52 x 48cm

Hygiena Digital Dry Block Mini Incubator.  Rango de temperatura de ambiente + 5ºC a 80 ºC. Stability (more) ±0,5 ºC. Heats to max temp in less than 15 minutes. Volumetric capacity of small tube incubator blocks = 1,5mL. Timer range: 1 min - 99 hr 59 min .Small Format (WxDxH): 11*15*8 cm; 0,5 kg Designed specifically for Hygiens'a wide variety of test devices.

Density ρ: 7950 (± 140) kg/m3 Box: Plastic box (included) Material: Stainless Steel Content (set up) (more): 1000 g F2 / 50 g F2 OIML Class: F2 Nominal Value: 1000g/50g

This UVP Sterilaire UV PCR Workstation was removed from a university lab where it was surplus to req (more)uirements. The unit powers up but only the white light works. We couldn't get the UV lights to work. There is one large crack in particular on the right-hand side at the front. The item is in a reasonable used cosmetic condition but the perspex has a lot of cracks. Internal dimensions - D55 W71 H68cm

Chemspeed ASW 2000 Automated Synthesis Workstation This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but the control PC has no hard drive. We have left the PC with the unit just in case it has any interface cards that may be useful. Included are; 1 x Chemspeed ASW 2000 Power SupplySN - ASW2000 JC0001Powers on Edmond Buhler Vortex Control UnitType - TiMix 6 ControlSN - 6164 MS 00188Powers up with intensity dial running up to 1400rpm Gilson Syringe PumpSN - 640A3D024Powers on Gilson AutosamplerSN - 270J5XE332Powers on Gilson unit - PN - U20655E - Powers on 5 x Chemspeed Cases marked ASW 1-5 containing parts:-ASW 1 - PN - 18917 & 648T032ASW 2 - PN - 648T032ASW 3 - PN - U20173K & 648T032ASW 4 - PN - W20223FASW 5 - PN - W20218F & 648T032 Fujitsu Siemens PC - No HDD.Dell 17" MonitorHP KeyboardLabtec Mouse Chevron LEV MonitorSN - 001288 1 x manual

This Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in reasonably good cosmetic condition. It's operational but needs a replacement filament.Unable to test further at our facility.

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave This was removed from a university lab (more) where it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is sin good cosmetic condition with minor marks.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: flat polygonal sheet Nominal value: 10 mg Material: Nickel silver High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.