Sample preparation

This listing is for a Merck Samplicity G2 Filtration System.The unit is in full working condition an (more)d is ready for immediate release.The Merck Samplicity G2 Filtration System revolutionizes sample preparation for High Performance Liquid Chromatography (HPLC) by offering a vacuum-driven solution that enhances efficiency and user comfort.Key Features:Vacuum-Driven Filtration:Utilizes a vacuum pump to simplify the filtration process, decreasing the manual effort often required in traditional methods.Multi-Sample Filtration:Allows filtration of 1 to 8 samples simultaneously, increasing throughput by up to 35%—perfect for busy labs.User-Friendly Operation:Designed with a simple lever mechanism, enabling quick recovery of clean samples in seconds, which aids in maintaining workflow efficiency.Millex Filter Compatibility:Fully compatible with Millex filters, ensuring reliability and effectiveness in a variety of HPLC applications.Ergonomically Designed:Reduces manual strain compared to syringe filtration, promoting better user health and comfort during repetitive tasks.Applications:HPLC Sample Preparation:Ideal for preparing samples that require filtration before analysis, particularly those that are viscous or contain particulates.Filtration of Challenging Samples:Well-suited for samples that are difficult to filter, such as those with high viscosity or substantial particulate matter, ensuring consistent results.Key Benefits:Increased Efficiency:Streamlines the sample preparation process, significantly cutting down on time and effort, allowing for quicker analysis turnaround.Enhanced Accuracy:Provides reliable filtration, minimizing the risk of contamination or sample loss, crucial for maintaining analytical integrity.Reduced Manual Fatigue:The design alleviates the physical strain associated with manual filtration methods, improving user comfort and lowering injury risk.

This listing is for 1 of 6 Serosep EntericBio Heatstation.The unit is in full working condition and  (more)is ready for immediate release.AI AvatarEntericBio Heatstation: Essential for Gastrointestinal DiagnosticsThe EntericBio Heatstation is a crucial component of the EntericBio system, specifically engineered for the heat treatment of inoculated Stool Preparation Solution (SPS) tubes. This step is vital in preparing samples for molecular diagnosis of gastrointestinal infections.Key Features:Precise Temperature Control: The Heatstation operates at a consistent 103°C for 30 minutes, ensuring effective treatment of samples to inactivate pathogens and prepare nucleic acids for further analysis.Compact Design: With dimensions of 200mm (W) x 100mm (H) x 370mm (D), the Heatstation is designed to fit easily into laboratory workflows without occupying excessive space.Integration with EntericBio System: The Heatstation works seamlessly with the EntericBio Workstation, which automates the setup of reactions. This integration enhances productivity by streamlining the sample preparation process.High Throughput: The system can process up to 46 samples per run, providing a rapid solution for laboratories needing to manage large volumes of diagnostic tests.Performance:Rapid Results: The entire process, from sample treatment to result availability, can be completed within 3 hours. This speed is essential for timely diagnosis and treatment of gastrointestinal infections.Applications:The EntericBio Heatstation is specifically designed for:Molecular Diagnosis of Gastrointestinal Infections: Ideal for laboratories specializing in infectious disease diagnostics, it ensures accurate sample preparation for downstream analyses.

This listing is for a QIAGEN Qiacube.The unit is in full working condition and is ready for immediat (more)e release.Supplied with test kits and paperwork.The QIAcube is a cutting-edge solution designed for high-efficiency, automated nucleic acid and protein purification, making it an essential tool for labs engaged in molecular biology research.Key Features:Full Automation: The QIAcube automates every step of the purification process, including sample lysis and elution, for up to 12 samples per run, ensuring consistent results without manual intervention.Preinstalled Protocols: It comes equipped with various protocols for purifying RNA, genomic DNA, plasmid DNA, viral nucleic acids, and proteins. This versatility allows immediate use for common applications, and additional QIAGEN protocols can be effortlessly downloaded.Standardized Results: By eliminating human error, the QIAcube provides standardized results across experiments, enhancing reproducibility and reliability crucial for downstream analyses.Integrated Components: The device combines a centrifuge, heated shaker, pipetting system, and robotic gripper in one unit, streamlining the workflow and saving valuable bench space.User-Friendly Interface: An integrated touchscreen simplifies protocol selection, guiding users through setup with on-screen messages, requiring no external PC.Customizable Elution Volumes: Users can adjust elution and sample volumes according to their specific needs, further enhancing flexibility.Technical Specifications:Capacity: Up to 12 samples per runPipetting Range: 5-900 µlShaker Specifications: Operates at 100-2,000 rpm and heats from ambient temperature up to 70°CCentrifuge Performance: Maximum of 12,000 x g with 12 rotor positionsReagent Bottle Rack: Accommodates up to six 30 ml bottlesSensors: Optical and ultrasonic sensors check samples, consumables, and liquid loading for each protocol runProcessing Time: Ranges from 30 to 120 minutes depending on the protocolPower Requirements: 220 to 240 V AC, 50 to 60 Hz, 650 VADimensions: 650 x 620 x 570 mmApplications:Nucleic Acid Purification: Ideal for DNA, RNA, and protein purification tasks.Sequencing and Gene Expression Analysis: Supports downstream applications like sequencing, genotyping, and proteomics.

This listing is for 1 of 4 Liferiver EX3600 Extraction System.The unit is in full working condition  (more)and is ready for immediate release.The Liferiver EX3600 is a cutting-edge, fully automated nucleic acid extraction system designed to enhance laboratory efficiency and convenience. Here’s a detailed overview of its standout features and applications:Key Features:Versatile Sample Volume: The EX3600 can process a wide range of sample volumes, from 20 to 200 microliters, making it suitable for diverse applications and sample types.High Throughput: Capable of handling up to 24 samples in a single run, the EX3600 significantly boosts productivity, particularly in high-demand research environments.User-Friendly Interface: The integrated LCD screen provides clear, real-time monitoring of the extraction process, allowing users to easily track progress and make adjustments as needed.UV Sterilization: Equipped with a UV lamp, the system ensures sterilization of the working area, which is crucial for preventing contamination and maintaining sample integrity.Quick Processing Time: The entire nucleic acid extraction process takes approximately 20 minutes, enabling rapid turnaround for critical experiments, such as those in diagnostics or research settings.Magnetic Bead Technology: Featuring a magnetic bar for efficient handling of magnetic beads, the EX3600 streamlines the extraction process, reducing manual intervention and minimizing errors.Applications:The Liferiver EX3600 excels in extracting nucleic acids from a variety of sample types, including:Whole Blood and Plasma: Ideal for clinical applications, particularly in genetic testing or infectious disease diagnostics.Serum Samples: Useful in biomarker discovery and research.Cells: Supports cellular research and analysis.Food Samples like Milk: Perfect for food safety testing and microbiological analysis.Fecal Samples: Essential for studies in microbiome research or gastrointestinal health.Specialized Use:The EX3600 is particularly effective for extracting viral RNA, making it a valuable tool in the fight against infectious diseases, including COVID-19 detection. Trained laboratory personnel can prepare samples before utilizing the automated system, ensuring consistent and reliable results.

This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA PurificationV (more)ery good working and cosmetic conditionThe QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materialsFeatures:Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumesStandardized protocols for diagnostic, routine, research and forensic applicationsFlexible loading of new samples during a runProtocols customizable (protocol steps, labware, etc.) on demandTraceability and LIMS compatibilityCompatible with most commonly used sample tubes and elution tubes and platesCompatibile with QIAsymphony DSP kits for diagnostic workflows.Specification:Minimum input volume: 200µlElution volume: 30-500µlDimensions: 128 x 103 x 73cm (w x d x h)Weight: 175kgElectric supply: 100 - 230VAC 50/60Hz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The power supply converts AC line voltage into 20kHz electrical energy. This high-frequency electric (more)al energy is fed to an inverter where it is converted into mechanical vibrations. The heart of the transducer is a lead zirconate titanate electrostrictive element that, when subjected to an alternating current, expands and contracts. The transducer vibrates in a longitudinal direction and transmits the motion to the horn tip which is immersed in the solution, causing cavitation. The implosion of microscopic bubbles or voids in the solution results, intensively stirring the molecules in the medium. The Sonifier functions in two modes: Pulsed and Continuous. In Pulsed Mode, ultrasonic vibrations are transferred to a solution at a rate of one pulse per second. This pulse duration can be adjusted from 0.1 to 0.9 per second, allowing the solution to be processed at full ultrasonic intensity while the temperature builds up – particularly valuable when processing warm volatile solutions and temperature-sensitive material. In continuous mode the Sonifier can be set for continuous duty. Used for: sample preparation, cell disruption, nanoparticle dispersion, mixing, homogenization, DNA, cell lysis, protein extraction

This MP FastPrep - 24 Sample Preparation System was removed from a university lab where it was surpl (more)us to requirements. The item powers on and is in a reasonably used cosmetic condition, unable to test further due to a 'Cancel Error' "Improper closing of the dome will be indicated by display Cancel" Due to this error, this item is sold as Spares or Repairs.

Agilent 1100 Series G1313A This item was removed from a university where it was surplus to requireme (more)nt. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Item does not contain the Sample Tray.

This Qiagen QIAsymphony Nucleic Acid Purification System was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and we have run a series of maintenance programs on the unit. They all appeared to work exactly as they should.As far as we can tell, the unit is in full working order.  The lab reported it was fully working prior to removal. We are unsure of exact date of manufacture, but the first part maintenance was done in 2016, so it will be 2015-2016 age. We have all the passwords to access it.It is in very good cosmetic condition with only limited marks from use. Unit dimensions - L126 W84 H183cmInside storage - D66 W64 H54cmAdjustable shelf. List of Consumables:-22 x Packs of Sealed Filter-Tips 200ul B (4 x 32 per pack)1 x Part used packs of Filter-Tips 200ul B (2 x 32)Box of 8 Sealed Packs of Filter-Tips 200ul B (4 x 32 per pack) (box unsealed)3 x Sealed boxes of Sample Prep Cartridges, 8-Well (QTY 336 per box)2 x Unsealed but full box of Sample Prep Cartridges, 8-Well (QTY 336 per box)9 x Unboxed Sample Prep Cartridges, 8-Well (QTY Unknown)4 x Sealed Boxes of Filter-Tips, 1500ul (QTY 1024 per box)5 x Sealed packs of unboxed Filter-Tips, 1500ul (4 x 32 per pack)2 x Part used packs of Filter-Tips, 1500ul (QTY 174 altogether)1 x Sealed Boxed DSP Circulating DNA Kit (ref. 937556)2 x Sealed Boxes of 8-rod Covers (144 per box)1 x unsealed Box of 8-Rod Covers (QTY 132)2 x Unboxed packs of 8-Rod Covers (QTY 24)4 x Bags of Accessory Troughs (3 x 5 Packs, 1 x 3 pack - QTY 18)4 x Sealed boxes of RNA Kit (QTY 192 per box)3 x Boxes of Insert D=13 (QTY Unknown)5 x Boxes of Insert 2.0ml (QTY Unknown)1 x Installation Cartridge kit (Boxed with other various pieces)1 x Boxed O-ring Change Tool Set4 x Blue Tube Racks4 x Bags of 3.5ml Tubes (QTY 100 per bag)1 x Part bag 3.5ml (QTY Unknown)1 x Wasp Bar Code Reader4 x SIC -01 Carrier Tubes Sample TrackTub of mixed spares1 x Grey unknown pieceWaste drawer safety lock partsWaste Bags

This was removed from a university lab where it was surplus to requirements. The unit has not been t (more)ested. It is in good cosmetic condition with marks from use. Part no. 5-2437-00

Qiagen Pyromark Q96 ID + Vacuum Prep Worktable System Lab This system was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system comprises the following: Qiagen Pyromark Q96 ID Qiagen PyroMark Vacuum Prep WorktableRef - 60-0237 PyroMark Vacuum Prep ToolRef - 60-0236 PyroMark Q96 IDApplication Software User Manual

This Perkin Elmer TurboMatrix 40 Headspace Sampler was removed from a university lab where it was su (more)rplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a sampling method that displayed the motor in good working order, we are unable to test this item further at our facility.

Covaris M220 Focused Ultrasonicator This was removed from a university lab where it was surplus to r (more)equirements. The system powers up and is in good working order. The laptop has Sonolab 7.2 software installed. It is in good cosmetic condition with very minor marks.

Qaigen Tissuelyser II unit and Qaigen Tissuelyser adapter set 2 x 24 (box) This was removed from a u (more)niversity lab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. We are unable to test it further at our facility. The client confirmed it had never been used and is brand new. Includes the following; Model-TissueLyser II Qaigen Tissuelyser adapter set 2 x 24 (box Sealed)

Grant Boekel PCB2 dry heater/cooler block. Digital LCD display. Temperature setting range from ambie (more)nt to 4° C. Resolution 0.1°C. Stability ±0.5°C.: two aluminum blocks for 24 x 1.5 mL microtubes each. Smoked acrylic plastic lid. Dimensions: 28.6 x 24.8 x 18.4 cm. The Grant Boekel PCB2 dry heater/cooler block is a very effective instrument of sample preparation during enzyme reactions, , DNA analysis, protein solubilisation for PAGE, warm incubation of microcentrifuge tubes for hybridisation, enzyme reactions and deactivations. Clinical applications of cooling blood samples prior to coagulation testing.

Samples and applications - Sample preparation for DNA and organic tissue analysis - Organic tissue d (more)ispersions TECHNICAL DATA - Rotor diameter: 3.2 mm - Stator diameter: 5 mm - Stator/rotor gap: 0,4 mm - Volume (H2O): 0,2 - 50 ml - Immersion depth: 10-50 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 4,2 m/s - Ultimate fineness, emulsions: 1 -10 µm - Ultimate fineness, suspensions: 10 -50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Samples and applications - Preparation of spreadable creams and soluble powders (tea, coffee, milk)  (more)- Suspensions/emulsions for infusion/injection - Preparation of pharmaceutical ointments and creams - Preparation of (soap, shampoo, conditioner, and creams) - Water analysis - Preparation of pigments, inks and paints - Preparation of liquid crystals for displays - Preparation of biodiesel TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed