Promega Maxwell 16 Nukleinsäure-Extraktionsgerät Automated Nucleic Acid Extraction

Varian 450-GC GC Gas Chromatograph This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up and is in good cosmetic condition with minor marks. Filters:1x Moisture Filter CP17911x Oxygen Filter CP17970

Dionex ICS-2000 Ion Chromatography System & AS40 Automated Sampler This was removed from a unive (more)rsity lab where it was surplus to requirements. The system has been professionally serviced and is in full working order. A full report is available on request. The system is in good cosmetic condition with minor marks. Included are; Dionex Ion Chromatography SystemModel - ICS-2000SN - 04050165 Dionex Automated SamplerModel - AS40-1SN - 04080222

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and passes all self checks. It is in excellent cosmetic condition with minor marks from use. Firmware Version - 2.3-1.2-2.8-2.0Software Version - 2.2.3.1Chips Supported - 178;177;179;186;191

Beckman Coulter BioMek FXP Laboratory Automation Workstation System This system was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition and powers on, although due to the following error; "D1 axis error:pump failed to send boot request. (0512)."we are unable to test it further, and it is listed as Spares/Repair. We suspect the tip loader is faulty. This error prevents the system from connecting to the software. This system also includes the following: - Beckman Coulter Accuframe - Thomas 669BESUU44TFE Pump - BioTek Valve Module - All relevant manuals and guides - Sami WorkStation EX Software 4.0 - Software setup guide - 2 x 96 well tip holders with all tips present - 2 x light curtain test rods - Filter regulator NAW2000-N02D-C - 2 x boxes of spare parts and replacement parts - 9 x bottles - pipes and connectors for bottles - PC + Monitor - Keyboard - Microscan MS3

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gilson PIPETMAN G Large Volume Kit, P5000G, P10mLGThe PIPETMAN G Large Volume Kit provides the two p (more)ipettes to pipette large volumes from 500ul to 10mL. With a redesigned piston assembly, the PIPETMAN G pipettes feature extremely low pipetting forces, improving comfort and minimizing injury. This is all accomplished while maintaining the durability, accuracy, and reliability of the original PIPETMAN pipettes. Premium Pipetting ComfortWith a new seal and lighter springs, the new piston assembly of PIPETMAN G Pipettes significantly reduces the force needed to aspirate and dispense liquids. The benefit is especially helpful during extended pipetting sessions and alleviates common hand stresses caused by repetitive actions. FlexiblePIPETMAN G Pipettes come with a durable stainless steel tip ejector which is ideal for most situations. Plastic tip ejectors are available separately and recommended for working with corrosive substances.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Large Volume Kit, P5000G, P10mLG includes: - Two PIPETMAN G Pipettes: P5000G, P10mLG - Two Bags of 10 x Polyethylene Filters - Manufacturer's Documentation - Operator's Guide - 3 Year Manufacturer's Warranty

Labconco 120ml Complete Fast-Freeze FlaskCompleteFlask consists of 7542300 Flask Bottom, 7544200 Fla (more)sk Top and a supply offilter paper.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper.Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports.Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C. INCLUDED: The Labconco 7540300 120 ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND MZ 1C Chemistry Diaphragm Pump Ultimate Vacuum 12 mbar / 9 torr Maximum Pumping Speed 0.5 (more) cfm at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - Convenient, quick and simple to use due to the top mounted power switch. - Optimized vacuum even with gas ballast for continuous purge. - Whisper quiet and very low vibration. - Maintenance-free drive system and proven long diaphragm life. Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE-sandwich diaphragms increase reliability and extend operating life. The MZ 1C pump is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. It features slim design for space-saving installation and good vacuum performance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. Two-stage chemistry-design diaphragm pumps are an excellent choice for continuous, oil-free pumping of gases at medium vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are rotary evaporators, gel dryers, filtrations and many other lab applications. The MZ 1C is a powerful pump for smaller vacuum apparatus enabling continuous pumping of solvent vapors. It´s a compact, stand alone pump with low ultimate vacuum. If the process requires atmospheric condensation of pumped vapors or electronic vacuum control, we recommend the pump families based on the MZ 2C NT or MD 1C. INCLUDED: The VACUUBRAND MZ 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

Stereomicroscope Series DZ model DZ.1100. Zoom 1:10 for enlargements total of 8x to 80x, head binoc (more)ular with gradient of 0 to 35°, eyepieces EWF 10x / 22. Objective, apochromatic 1xplan and large stand, ergonomic, illumination LED incident and transmitted. SPECIFICATIONS EYE Pair of eyepieces EWF 10x / 22 mm HEAD • Head binocular ergonomic with tilt variable between 0 and 35 ° • Diopter adjustment ± 5 in both eye • Distance inter-pupillary adjustable between 55 and 75 mm All the optics are coated with anti-fungal and anti-reflective to obtain the maximum performance of the light UNIT OF ZOOM CENTRAL 1:10 for enlargements total of 8 to 80x MAIN OBJECTIVE COMMON • Standard configurations are supplied with a main objective common apochromatic 1x plan, working distance 78 mm • Also available are other main objectives common apochromatic with magnification factors 0.5 x (working distance 126 mm) and 2x (working distance of 33 mm). SUPPORT • Great ergonomic support with a plate of ø 100 mm and two clips holding samples • Focus coaxial macro and micrometric LIGHTING • Supplied with illumination incident and transmitted LED 3 W with built-in power supply of 100-240 V. • Both illuminators can be used simultaneously, and the light intensities can be adjusted separately. PACKAGING Supplied with power cable, cover anti-dust, spare fuse and user's manual. Box of polystyrene.