LAUDA Hydro H 8 water bath

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Histological water bath from 25°C to 80°C for the laboratory This water bath model is used in histol (more)ogical, chemical, clinical and bacteriological laboratories for stretching and drying tissue samples. The exact temperature control of the LAUDA Hydro H 2 P water bath ensures clear visibility of the sample and gentle drying even on the heated edge. The instrument operates in a temperature range from 25 to 80°C with a constant temperature of ± 0.5 K. The body of the bath is made of black anodized aluminum. The low height of the bowl allows comfortable and safe work. - Temperature adjustment by knob with temperature scale - Temperature display by means of a reference thermometer on the edge of the pool - Tank interior in black anodized aluminum If you want to know more about water baths in histopathology and new histotechnologies in general, we recommend the HistoTube YouTube channel. Accessories Lid, to cover the bath interior, made of black anodised aluminium, with ball handle.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the water bath is used to maintain constant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Laboratory water bath FROILABO FIRLABO BMP30 Volume: 3L Temperature range: ambient temperature +7°C  (more)to +60°C Power: 250W Accuracy: ± 0.5°C Interior dimensions: 280 x 110 x 80 mm External dimensions: 360 x 120 x 130 mm With a rack for 30 tubes diam. 14mm

Hersteller: Keysight Modell: MSOX2024A  Beschreibung: Das Keysight Technologies MSOX2024A Oszillosko (more)p ist ein Mixed-Signal-Oszilloskop mit vier analogen und acht digitalen Kanälen und 200MHz Bandbreite. Dieses Oszilloskop bietet 1Mpts Speicher und die acht digitalen Kanäle haben eine Abtastrate von 1GSa/s mit einer Umschaltrate von 50MHz. Das Oszilloskop MSOX2024A führt 23 automatische Messungen durch, wie z. B. Spannung, Zeit und Frequenz, sowie fünf Wellenformfunktionen, einschließlich Addition, Subtraktion, Multiplikation, Division und FFT. Dieses Oszilloskop verfügt über ein 8,5-Zoll-LCD-Display mit 64 Helligkeitsstufen, das 50 % mehr Anzeigefläche und eine 3,5-mal höhere Auflösung (WVGA 800x480) bietet. Das Oszilloskop MSOX2024A ist mit der benutzerdefinierten ASIC-Technologie MegaZoom-IV ausgestattet, die eine Geschwindigkeit von bis zu 50.000 Wfms/s bietet, um das Signal im Detail und seltene Anomalien zu betrachten. Dieses Oszilloskop ist mit optionalen Upgrades wie Bandbreite, Messanwendungen, Protokollanalysator (Software), integriertem 20-MHz-Funktionsgenerator WaveGen, Digitalvoltmeter sowie Triggerung und Dekodierung serieller Protokolle erhältlich. Die MSOX2024A Oszilloskope gehören zur InfiniiVision 2000 X-Serie. Kernmerkmale: -Kalibriertes Mixed-Signal-Oszilloskop mit MegaZoom-IV Custom ASIC Technologie -Modelle mit 70MHz, 100MHz und 200MHz Bandbreite -Modelle mit 2+8 Kanälen und 4+8 Kanälen für Mixed-Signal-Oszilloskope (MSO) -Aktualisierungsrate von 50.000 Wellenformen/Sekunde -Interleaved 2GSa/s oder nicht-interleaved 1GSa/s Abtastrate. 8,5" WVGA (800 x 480) LCD-Display mit 1,75ns Anstiegszeit -Bis zu 1Mpts Speichertiefe Integrierter 5-stelliger Hardware-Zähler -Integriertes Digitalvoltmeter (DVM) -Anschlussmöglichkeiten USB-Host (einer vorne, einer hinten) USB-Gerät LAN (wahlweise) GPIB (wahlweise) -Triggertypen: Flanke, Pulsbreite, Muster und Video USB-Anschlüsse zum einfachen Drucken, Speichern und Weitergeben von Daten Technische Daten: Betriebstemperaturbereich: 0°C bis +55°C 100V bis 120V (50Hz/60Hz/400Hz), 100V bis 240V (50Hz/60Hz, ±10%) auto-ranging Stromversorgung Abmessungen 381mm x 204mm x 142mm 3.9Kg Gewicht Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.

Metrohm 702 SM Titrino titrator Metrohm 794 Basic Titrino keyboard Agitator / stirrer 728 Technical  (more)characteristics Voltage: 100-240V, 50/60Hz Power: 15VA Burette volume: 20 mL External dimensions (L) x (D) x (H): 15 x 25 x 35 cm With Accessories 2 cruets 2 temperature probes