Automated liquid handling

This listing is for a Atas Optic 2 Programmable Injector GC

This listing is for a Varian 3900 GC with CP-8400 AutosamplerThe Varian 3900 gas chromatograph (GC)  (more)is designed to meet the demands of the analytical laboratory with its compact design—GC occupies less than half the workspace of the average gas chromatograph unit. Models 39001-00 and -05 feature an icon-based keypad which simplifies training and increases daily productivity. Select one of six pre-programmed languages for further ease-of-use. Password protection locks keypad from unauthorized access. Each Varian 3900 GC unit features a front access column compact oven with Precise Temperture Control which uses standard 7" (17.5 cm) diameter capillary columns. Maximum operating temperature is 450°C—accommodates any application. Plus, the oven cools down from 450°C to 50°C in only 5.2 minutes!

This listing is for a Varian Autosampler Model 410 unit on it's own. The Varian ProStar 410 HPLC Aut (more)osampler has variable injection volumes and automixing/autodiluting. The ProStar 410 is perfect for laboratories with changing needs. It provides flexible operation without sacrificing reliability or performance. Multiple injection modes for flexibility, ease of use, and precision. Full loop filloverfills the sample loop for maximum precision. Partial loop fill allows easily programmed variable injection volumes. Microliter pickup withdraws the exact amount to be injected without sample loss. The Varian ProStar 410 AutoSampler offers the best of both worlds. It is intelligent for research applications yet rugged enough for routine quality control work. With Pressure Assisted Sampling Aspiration (PASA), the Varian 410 ProStar AutoSampler applies pressure within the vial while the sample is withdrawn by a high-resolution syringe. Air bubbles and in-vial vacuum problems are eliminated resulting in excellent reproducibility. Flexibility with multiple injection modes Optimal performance with integrated column oven Biocompatible and sample cooling options available Specifications: Standard sample tray 84 x 1.5 mL vials with 3 x 10 mL vials Optional sample trays 96 x 2.5 mL vials or 24 x 10 mL vials Dispenser unit 50 µL syringe standard; 1000 µL or 2500 µL syringes, optional Injection volume 1 to 5000 µL with preparative option up to 10 mL Injection methods nine methods in memory Needle wash integrated, programmable large reservoir Vial detection Yes Reproducibility Full Loop: < 0.3% RSD Partial Loop: < 0.5% RSD Microliter Pickup: < 1.0% RSD Carryover < 0.05% Optional sample cooling 4°C to 15°C programmable Can be refurbished on request, refurbishment not included in price.

Metrohm 838 Advanced Sample Processor for parts without caroussel Without Probe Without Software

VARIAN ProStar 410 HPLC Autosampler Cat. Number : 03-935290-01 Power Requirement : 115/230V, 50/60Hz (more), 250VA Sample Tray Capacity : 84 vials of 1.5 mL (Std) and 3 vials of 10 mL (LSV) Working Temperature : 10 - 40°C Loop Volume : 1 - 5000 µL Dimensions (WxDxH) : 30 x 49 x 34 cm Power ON/OFF -> ok Equipment not tested

Agilent G1811A XY Autosampler Autosampler Type : XYZ robot with stationary rack design Needle Positi (more)oning Performance : Resolution in X, Y and Z: ±1 mm Repeatability in X, Y and Z : ±0.25 mm Arm Speed X- and Y-axes : 250 mm/s Z-axis: 126.9 mm/s Rack Capacity : Up to four 21 series racks Dimensions : 21" W x 17" D x 14.5" H (53.5 × 44 × 37 cm)

Autosampler SPS 3 for parts VARIAN Error code: 23 With protection

SPARK Model 900 Triathlon Autosampler for HPLC for parts Power Requirement : 200V Dimensions (WxDxH) (more) : 26x35x42 cm Weight: 30 kg Power ON/OFF -> OK Equipment not tested Missing parts

SHIMADZU SIL-10AF Autosampler for parts Power Requirement : 220V Dimensions (WxDxH) : 26x35x42 cm We (more)ight: 20 kg Power ON/OFF -> ok Equipment not tested

SHIMADZU SIL-10A Auto Injector for parts Power Requirement : 220V Dimensions (WxDxH) : 26x35x42 cm W (more)eight: 20 kg Power ON/OFF -> ok Equipment not tested

RAPIDSTAK F01350 TWO COLUMN MICROPLATE STACKER Up to 300 plates per hour

Metrohm 858 Professional Sample Processor for parts

Manufacturer: ASYS Hitech GmbH, Austria Model: Flexispense M - Low Volume and High Speed Dispenser T (more)ype: G 013450 S/N: 56040 Description: The optimum solution for 384 & 1536 well dispensing in HTS  applications, either integrated into fully automated systems or for use as  standalone systems. The Flexispense M is the best choice for dispensing in HTS laboratories.  The computer controlled plate centring mechanism makes plate loading for a robot very easy. A wide range of solvents, acids, bases and other aggressive  liquids can be dispensed with confidence since the liquid path is completely inert and the adjustable pump speed allows for a wide viscosity range. The  Flexispense M is also very fast, filling a 1536 well plate within 23 seconds with 5µl per well. The pressure-free ceramic piston pump system allows to switch  between different reagents using an external valve. The Flexispense M is featuring a 16 channel manifold with disposable tips for 384 and 1536 well. Features: Height adjustable 16 channel manifold for standard-well and low profile  microplates with 384 and 1536 wells Low dead volume and pump-back capability to save expensive reagents Flexible volume range from 2µl - 2.5ml per well, selectable in 0.5µl steps Long life piston pump: High precision over life time and no running cost Flexible dispensing patterns: Start and stop position as well as skipping  columns can be programmed Easy integration into robotics systems Footprint and computer interface compatible to existing, already integrated  instruments from other manufacturers: allows easy swap to Flexispense for immediate availablity of the advantages of this system Computer controlled plate centering system, Active-X controls available Complete inert liquid path: only PTFE, ceramic, PVDF and glass in contact with  liquid High dispensing speed: 22 seconds for a 384 well plate (50µl / well) 23 seconds for a 1536 well plate (5µl / well) Detachable display / keyboard unit to save valuable space for system  integration Items delivered: Asys Flexispense M Low Volume and High Speed Dispenser Power Cord Manual for Flexispense 2 & 6 available as PDF via E-Mail The device is in very good cosmetic condition and 100% functional tested.  Ready for your use!     Hersteller: ASYS Hitech GmbH, Austria Modell: Flexispense M - Low Volume and High Speed Dispenser Typ: G 013450 S/N: 56040 Beschreibung: Die optimale Lösung für das Dispensieren in 384 & 1536 Well Platten in HTS  Applikationen, entweder integriert in vollautomatischen Systemen oder zur Verwendung als standalone System. Der Flexispense M ist die beste Lösung für Dispensier ? Aufgaben in HTS Labors.  Der computergesteuerte Platten-Zentrier-Mechanismus ist für das unkomplizierte Beladen durch Robotersysteme optimiert. Da der  Flüssigkeitspfad völlig inert ist, können verschiedenste Lösungen, Basen, Säuren  und andere aggressive Flüssigkeiten ohne Bedenken dispensiert werden, die  einstellbare Pumpengeschwindigkeit schafft weitgehende Unabhängigkeit von der  Viskosität der zu dispensierenden Flüssigkeit. Mit 23 Sek. für eine 1536 Well Platte (5µl / Well) ist der Flexispense M sehr  schnell. Die druckfreie Keramik Kolbenpumpe in Verbindung mit einem externen  Ventil ermöglicht die parallele Anbindung von mehreren Reagenzien. Der  Flexispense M ist mit einem 16 Kanal Dispensierkamm mit auswechselbaren Spitzen,  für 384 und 1536 Well Platten ausgestattet. Kernmerkmale: Höhenverstellbarer 16 Kanal Dispensierkamm für Standard-Well und Low Profile  Mikroplatten mit 384 und 1536 Wells Niedriges Totvolumen und Rückpump - Funktion zur optimalen Ausnutzung des  vorhandenen Reagenzvolumens Flexibler Volumensbereich von 2µl ? 2.5ml pro Well, wählbar in 0.5µl Schritten Long Life Keramik-Kolbenpumpe: Maximale Präzision über die gesamte Lebensdauer  und dadurch keine laufenden Kosten Flexible Dispensiermuster: Start und Stop Position kann ebenso definiert  werden wie etwa das Auslassen von Reihen Leichte Integration in automatisierte Systeme Standfläche und Computerinterface kompatibel zu existierenden, bereits  integrierten Geräten anderer Hersteller: Leichter Umstieg um die Vorteile des  Flexispense M schnell zu übernehmen ist möglich. Computergesteuerter Platten-Zentrier-Mechanismus, Active-X Controls sind  verfügbar Flüssigkeitspfad völlig inert: nur PTFE, Keramik, PVDF? und Glas kommen mit  Flüssigkeit in Kontakt Hohe Dispensiergeschwindigkeit: 22 Sekunden für eine 384 Well Platte (50µl / Well) 23 Sekunden für eine 1536 Well Platte (5µl / Well) Abnehmbare Display / Tastatureinheit um wertvollen Platz für die Integration  zu sparen Lieferumfang: Asys Flexispense M Low Volume and High Speed Dispenser Stromkabel Bedienungsanleitung für Flexispense 2 & 6 verfügbar as PDF via E-Mail Der Dispenser ist in einem sehr guten Zustand und 100% auf Funkion geprüft.Bereit für Ihren Einsatz!

Manufacturer: Perkin Elmer Model: FlexDrop IV Precision Reagent Dispenser (Low Volume Systems) P/N:  (more)BSQLV41 S/N: S60101 (Jan. 2006) Description: The FlexDrop Precision Reagent Dispenser is a liquid handling system designed  for rapid dispensing of reagents, buffers, solvents and cells for high throughput assay preparation and compound  storage. Intended for use in pharmaceutical, biotech, research and clinical applications, FlexDrop systems  perform direct, non-contact dispensing into 96-, 384-, and 1536-well shallow and deepwell microplates. This small footprint  instrument easily fits into a laboratory biosafety or fume hood to ensure sterile containment and safe dispensing of  volatile reagents and solvents. Specifications: Model: FlexDrop IVReagent Capacity: 1 - 4Dispense Volume Range: 200 nL - 2 mLMicroplate Compatibility: 96-, 384- and 1536-wellDispense Head Configuration: 4 x 8 precision valvesDimensions: 9.5 in. (241.3 mm)including tubing: 12 in. (304.8 mm)Width: including side mounted bottles 21 in. (533.4 mm)Depth: including bottles 20 in (508 mm)Weight (approximate): 35 lb (15.9 kg)Electrical requirements: 110, 220, 240 Vac ±10%; 50/60 Hz; 350 VA Items delivered: - Perkin Elmer FlexDrop IV- including Bottles- Power Cord The Dispenser is in good cosmetic condition and fully working tested.Ready for your application.     Hersteller: Perkin Elmer Modell: FlexDrop IV Precision Reagent Dispenser (Low Volume Systems) P/N: BSQLV41 S/N: S60101 (Jan. 2006) Beschreibung: Der Perkin Elmer Flexdrop Präziosions Reagenz Dispenser (Abfüller) ist ein  Liquid-Handling-System für die schnelle Abfüllung entwickelt von Reagenzien, Puffer, Lösungsmittel und Zellen für die Assay mit hohem Durchsatz Vorbereitung und  Verbindung Lagerung. Vorgesehen für den Einsatz in pharmazeutischen, biotechnologischen, Forschung und klinische Anwendungen, funktionieren Flexdrop  -Systeme direkt, berührungslos in 96-, 384- und 1536-Well Mikroplatten.Dieses platzsparende Instrument passt problemlos in einem Labor oder  Labor-Dunstabzug um die sichere Abfüllung von flüchtigen Reagenzien und  Lösungsmittel zu gewährleisten. Technische Daten: Modell: IV FlexdropReagenzkapazität: 1 - 4Abfüll Volumen Bereich: 200 nL - 2 mlMikrotiter-Kompatibilität: 96-, 384- und 1536-WellDosierkopf Konfiguration: 4 x 8 PräzisionsventileMaße: 9,5 in (241,3 mm)einschließlich Schlauch: 12 (304,8 mm).Breite: einschließlich seitlich montierten Flaschen: 21 in (533,4 mm).Tiefe: einschließlich Flaschen 20 in (508 mm)Gewicht (ca.): 35 lb (15,9 kg)Elektrische Anforderungen: 110, 220, 240 V AC ± 10%; 50/60 Hz; 350 VA Lieferumfang: - Perkin Elmer FlexDrop IV Dispenser- inklusive Flaschen- Stromkabel Der Dispenser befindet sich in sehr guten Zustand und ist 100% auf Funktion  geprüft.

Manufacturer: Tecan Model: Power Washer 384 S/N: 510000011 P/N: 16029900 Description: The Power Wash (more)er 384 is ideal for enzyme immunoassays and cell-based assays, in  either 96- or 384-well microplate formats. It has advanced wash-heads for simultaneous processing of all wells in either format, reducing the overall  plate processing time to just a couple of seconds and enabling maximum  throughput. Additionally, the PW384 is fitted with an aerosol shield to protect the user  from potentially infectious aerosols, and productivity is further increased by automated switching between up to three different buffers. Wash parameters such as dispense and aspiration speed, vertical aspiration  position and vacuum level can be fine-tuned to ensure the best results for your application using the simple WinWash plus package, and up to 20 different  washing programs can be stored. The Power Washer 384 is fully compatible with Tecan’s Freedom EVO® liquid  handling workstations and the Connect™ microplate stacker system. Alternatively, the washer can be operated as a stand-alone instrument and is straight forward  to program using the integrated keypad. The instrument is easy to maintain and comes with fully automated cleaning  procedures, ensuring high reliability. To further improve walkaway time and  process security, the instrument can be fitted with options including large volume  bottles and liquid level control for both buffer and waste bottles Product hightlights include: • High performance washer for 96- and 384-well microplates• 2-in-1 solution combining two applications and two• microplate formats in one compact instrument• Easy, user-exchangeable wash heads guarantee optimum• throughput in both 96- and 384-well formats• Simultaneous processing of all wells also in the 384-well format - no  time-consuming indexing of wash head required• Tunable wash parameters for best results with both cell-based and ELISA assays  for research use• Handling of up to 3 wash buffers for maximum application flexibility• Easy programming via integrated keypad or via WinWash™ plus software• Reliable operation and easy maintenance via predefined cleaning protocols• Aerosol cover around wash head for maximum user safety• Optional large volume bottle set and liquid level control for process  monitoring of wash buffer and waste bottles• Full compatibility with Freedom EVO®, TRAC™ and Connect™ system Specifications: Applications: EIA and Cell based assaysMicroplate formats: 96- and 384-wellsMode of plate processing: all wells simultaneouslyManifold channels: 96, 384Wash-liquid channels: Up to 3Wash program storage: Up to 20Dispense volume range: 50-3000 µl in 96 format10-1000 µl in 384 formatDispensing accuracy: CV = 2% over 96-well plateCV = 3% over 384-well plateResidual volume: = 2 µl across 96-well plate= 2 µl across 384-well plate Items delivered: - Tecan Powerwasher 384 (for 384- & 96-Well)- Power Cord- Instruction Manual as PDF via E-Mail The instrument is fully functional tested - Used but good cosmetic condition.

Manufacturer: Brandel, USA Model: PXR-96-MS Programmable Plate Dispensing System Description: Brande (more)l's Micro Dispensing Systems offer high efficiency, repeatable accuracy  and maximum flexibility – at a cost far below most dispensers currently on the  market.MicroDispensers consist of a Dispensing Unit and a separate,  Pump/Controller with keypad. Dispensers can also be operated by  remote computer using the Controller's built-in RS232 port. PXR - For dispensing viscous solutions such as scintillation cocktail Specifications/Features: Delivers user defined volumes between 10 and 999 µl ±5% relation to calibration with ±3% repeatability Configuration for 96-well plates Operations are menu driven. Simply enter the volume you wish to deliver and  set pump dial to dispense. Critical components are made of Teflon, stainless steel or Teflon-coated  aluminum to resist corrosion. MicroDispenser and Pump/Controller occupy less than 18 x 18. in. of bench  space Dispensing manifolds can be easily interchanged. Liquids of similar viscosity can be used in the same MicroDispenser. Reversible pump clears the system and saves solution. Dispenser can be operated remotely, through an RS232 port, or from controller  keypad. Self-priming delivery manifold, Teflon delivery tubing Digital speed control Power Supply 220V MicroDispensers include one-year warranty and full factory support. Custom configurations for 6, 12, 24, 48-well plates and others upon request. Items delivered: - Pump Control Unit- PXR-96 MS Dispensing Unit- Power Cord- Underlay base for liquid safety (not pictured) The System is in very good cosmetic condition (just 1-2 scratches on top) and  all tubes are very clean (as it's to see on the photos).It's 100% functional tested!Ready for your use!

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: CTC Analytics Model: MN 01-00 PAL Power Supply Description: CTC Analytics MN 01 - 00  (more)PAL power supply. Specifications: - Electrical requirements: 100-240V, 120W, 50/60Hz - Environment: 4°C - 40°C constant temperature, < 80% humidity (noncondensing) - Weight: 10 kg Items delivered: - CTC Analytics MN 01-00 PAL power supply- Conection Cable- Power cord Condition: The power supply is in very good cosmetic condition. It is 100% functional tested and ready to be applied.

Save precious time and gain efficiency in the lab with the OLA2500 Lab Automation System (LAS), the  (more)high-throughput aliquotting solution with pre- and post-analytical sample-processing capabilities. The Olympus OLA2500 LAS is an advanced modular automation system designed for medium- to high-volume laboratories. As a front-end sample-processor the OLA2500 LAS automates sample aliquotting – saving time, labor, and eliminating sample handling errors. The system also selectively decaps and sorts tubes to any analyzer sample rack. The Olympus OLA2500 LAS is a Olympus Lab Automation solution to increase productivity and efficiency in medium- to high-volume laboratories. It automates labor-intensive tasks such as sample identification, decapping, aliquotting, out sorting, and archive preparation of sample tubes. Typical aliquotting throughput of up to 650 total tubes per hour and sorting throughput of up to 800 tubes per hour to reduce your sample preparation for better test turn-around time Minimize your staff’s biohazard exposure, reduce errors, and reduce repetitive motion injuries associated with manual sample-processing User-defined applications for aliquotting priority, sorting, decapping, and archiving. Identifies sample tube size, cap type and color, and sample volume using an on board digital image analysis system Processes most primary tubes (including conventional, BD Hemoguard or screw top closures in parallel, foil top closures with optional decapping unit) Builds personality racks for Olympus, Hitachi, Beckman-Coulter and others Automatically generate secondary tubes with user defined barcode labels No carryover with disposable, conductive aliquot tips Clot detection to ensure valid sample distribution Prioritized aliquotting when there is insufficient amount of sample in the primary tube Load up to as many as 300 samples in the input area Sort to any number of user defined sorting targets with up to 1,080 tube capacity at the destination area Holds bulk on-board consumable inventory Sort and speed primary and/or secondary samples to workstations in specific analyzer racks Access samples without interrupting the instrument with electronically controlled drawer bays Sorts primary and secondary sample tubes at high speeds to meet peak load demands Archive samples in parallel with sorting or separately in batch User defined sorting areas that accommodates any analyzer sample rack Reduces the number of “problem tubes” at the analytical workstations by sorting out the tubes with bar code label, test order and decapping problems Decap screw cap and conventional rubber closures in parallel with a standard decapper; an optional decapper handles foil top closures

For sale: refurbished Autoinjector for Agilent 6850 GC   Also available: CTC autosamplers for Agilen (more)t GC Agilent 6850 N GC with FID and Split/splitless inlet Parts and consumables for Agilent 6850 GC FID for 6850 GC Split/splitless inlet for 6850 GC   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! 6850 Automatic Liquid Sampler. Holds up to 27 2-ml vials. Optional turret holds 22 4-ml vials. Compatible only with the 6850 GC

For sale: Refurbished Agilent 7683A autoinjector with 100 vial tray The Injector / Injection Tower ( (more)G2613A / G2913A) The Tray (G2916A / G2614A) Also available: Agilent 7683B autoinjector Agilent 7693 autoinjector Parts and repair service for Agilent 7683 autoinjector or tray   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! The Injector / Injection Tower (G2613A / G2913A) The Tray (G2916A / G2614A) Also available: Agilent 7683B autoinjector Agilent 7693 autoinjector Parts and repair service for Agilent 7683 autoinjector or tray   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! The Injector / Injection Tower (G2613A / G2913A) The Tray (G2916A / G2614A) Also available: Agilent 7683B autoinjector Agilent 7693 autoinjector Parts and repair service for Agilent 7683 autoinjector or tray   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver repair service or exchange service for Agilent autosamplers and trays

Agilent GCMS 5975C with 7890 GC For sale: refurbished Agilent GCMS including:  – 5975C MS with Turbo (more) pump – 7890A GC with Multimode inlet and Gerstel TDU – Gerstel MPS2 autoinjector with Headpace, SPME and TDU – complete with software and computer Also available: Agilent 5793N MSD Complete Agilent GC or MS systems Used Parts for Agilent 5975 MSD   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! For sale: refurbished Agilent GCMS including:  – 5975C MS with Turbo pump – 7890A GC with Multimode inlet and Gerstel TDU – Gerstel MPS2 autoinjector with Headpace, SPME and TDU – complete with software and computer Also available: Agilent 5793N MSD Complete Agilent GC or MS systems Used Parts for Agilent 5975 MSD   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty!

For sale: refurbished Perkin Elmer ATD Automated Thermal Desorber TurboMatrix   Also available: Perk (more)in Elmer headspace sampler Parts and consumables for Perkin Elmer ATD Complete Perkin Elmer GC systems   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! Perkin Elmer ATD Automated Thermal Desorber TurboMatrix Automated sampling of up to 50 tubes with manual pneumatics. Overlaps tube desorption with GC analysis for optimum productivity. Also includes a separate trap-clean-and-test function which saves time and protects the GC column and detector.

For sale: refurbished Varian SPS-5 Autosampler   Also available: SPS3 sampler and other options if n (more)eeded Other Atomic Absorption Systems like Varian 220FS, 220Z Furnance, 240Z Furnance, Perkin Elmer series New and used parts for Agilent and Varian AAS systems   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services by our own engineers   The SPS-5 Sample Preparation System is a random-access autosampler which can be connected to all of the AA, ICP and UV spectrometers currently manufactured by Varian. It can hold up to 500 samples when the optional rear rack extension is fitted. A fume hood is also available. A range of rack types is available for different test tube sizes. Rack hole sizes can be further customized with the 60 position (Type 25) rack for different test tube diameters. The SPS-5 is compatible with the optional on-line Auto-Diluter. The SPS-5 autosampler includes rinse station, two racks (Type 25 and Type A) and inert probe. Standard configuration allows up to three sample or standard racks to be used at once. With the optional rack extension, up to five racks may be accommodated. Racks must be ordered separately. The autosampler requires but does not include test tubes/bottles. The SPS-5 is also available in a fibreoptic autosampler version for use with the Cary 1, 3, 4, 5, 50, 100, 300, 400 and 500 with the Cary WinUV software. Version 2 of the WinUV software does not support use of the SPS-5 with the normal liquid sampling probe nor does it support the optional Diluter. Rack recognition To reduce the risk of operator error, the SPS-5 features Magnetic Rack Recognition (MRR). Each rack has an embedded magnet which is detected by sensors in the SPS-5. The SPS-5 can detect rack presence and type, minimizing the risk of operator error during rack changes. Rack types The SPS-5 can be fitted with five different rack types, catering for a range of sample vessels: Rack type Capacity Tube volume (nominal) Type 10 100 10 mL Type 25 60 25 mL Type 50 35 50 mL Type A 12 125 mL Type B 6 500 mL The Type 25 rack can be fitted with adapters to hold small diameter test tubes. The Type A and B racks are supplied with vessels. All racks are made from chemical-resistant polypropylene. Probe height The height of the SPS-5 probe can be programmed so that you can sample from a particular layer in a sample or avoid aspirating sediment from the bottom of a vessel. Diluter An optional Diluter can be fitted to the SPS-5. This can be used for off-line standard and sample preparation prior to a run. It can also be used to perform on-line dilutions for some techniques.The Diluter’s design ensures that the syringe is never contaminated. After dispensing any solution into a sample vessel, the SPS-5 will mix the contents with the probe. The probe is simultaneously vibrated horizontally and moved up and down through the solution. Splashing is eliminated as the probe height is set in response to the volume in the vessel.

For sale: refurbished Agilent 6850 Network GC with FID and Autosampler   Agilent 6850N GC Split/spli (more)tless inlet FID Detector Chemstation software Computer Autoinjector Test report   Also available: Agilent 7890A GC Agilent 6890N GC Agilent 7820 GC   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services for Agilent GC, HPLC, GC/MS, LC/MS by our own engineers   Agilent 6850 specifications: 6850

For sale: refurbished Agilent 7890A GC     Look like new 7890A GC Split/splitless inlet FID Detector (more) Chemstation software Computer Agilent 7693 Autosampler (G4513A) with 150 Sample Tray (G4514A) Test report   Also available: Agilent 7890B GC Agilent 6890N GC Agilent 7820 GC Parts for Agilent 6890 and 7890 GC’s like detectors, boards, and more   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services for Agilent 7890 and 6890 GC’s  by our own engineers   7890 specifications: 7890A Specs

For sale: Agilent G1329-60009 – autosampler sample transport assembly for Agilent 1100 series autosa (more)mpler   Also available: Agilent HPLC used parts like boards, detectors, inlets, samplers   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty!   We can deliver maintenance and repair services for HPLC systems by our own engineers

For sale: refurbished CTC Combipal autoinjector for GC with Headspace module Including: cables, tray (more)s, Headspace module with syringe holder, game controller, installation/mounting kit for any brand of gc, Cycle composer software, test reports   Also available: Standard CTC autoinjector without Headspace module Used parts for CTC Combipal CTC autoinjector for HPLC systems   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair service for CTC autoinjectors  by our own engineers

For sale: GL Sciences Optic 3 High Performance Injector   Also available: Other inlets for GC system (more)s Parts for OPTIC   We are not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are delivered with warranty! We can deliver maintenance and repair services for GC, HPLC, GCMS and LCMS  by our own engineers