ProStar 410 HPLC Autosampler

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. Everything powers up and the system is in good cosmetic condition with some marks from use. There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code 'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100) We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well. This error makes it impossible to home the system. So it could not be tested any further. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31840Unit dimensions - W77 L92 H98cm 1 x IBM ThinkCentre PCMT-M 8113-DA1Biomek Software Version 3.3 installed. 1 x Lenovo MonitorType - 9227-AC1 1 x Lenovo Keyboard 1 x IBM Mouse 2 x Nalgene 2 Gallon Waste/Supply Bottles Box of Accessories:-Beckman Coulter AccuFrameBeckman Coulter Vacuum Valve UnitPower AdaptorVarious cables8 x 2ml Tube holders (24 tube slots in each)94 x 2ml tubesVacuum Manifold Base23mm Spacer Collar PN 71975136mm Collar3 x Thermo Scientific 96 well 0.2ml plates.

Perkin Elmer Janus G3 Workstation This system was removed from a university lab where it was surplus (more) to requirements. The system is in good used condition, with various marks and signs of general use. Some of the VariSpan tips are slightly bent and will require replacement. The PC has WinPrep 4.9 software installed. The robot was initialized and successfully passed an XY random 100 move test with no errors. System consists of: - Perkin Elmer Janus AJM8001/T Liquid Handler - Equipped with Varispan 8 Tip Arm - Perkin Elmer Peri Pump - Lenovo ThinkCentre PC with keyboard, mouse, monitor, and barcode scanner - Running Windows 7 - Perkin Elmer WinPrep 4.9 software installed (software CDs included) - Riello UPS - Janus Printed User Manual Accessories included:- 16 x Spare Tips - 16 x Spare Tecan 20734804 Cavro Syringes - 5 x Waste Bottles - Various other small parts, spares, and consumables

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab wh (more)ere it was surplus to requirements. The system is in full working order and was used until very recently. Included in the system are; The system units are in good cosmetic condition. The system consists of the following units: Biomek FX robotic liquid handlerSerial No. 501258024 plate position bedFitted with light curtain, two robotic heads, tip changer, Variomag Teleshake Biomek FX Device ControllerSerial No. 4000A51063 Thermo Electron Microplate HotelSerial No. 40578218With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers Cole Parmer Masterflex Console Drive with twin head bi-directionalModel 7520-c7 Cole Parmer Masterflex L/S Economy Drive with twin head ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1Serial No. 1S1OAGS11D00MJ0345JQ View Sonic 17" MonitorModel VS14768Serial No. TT1152621348 Lenovo keyboardModel KU-0225Serial No. SN8134833 Lenovo mouseSerial No. 44HM285 ALP 74cm conveyer with Microscan MS-710 barcode scannerSerial No. FIS-0710-0010 Variomag Teleshake plate shaker with power supply Beckman Coulter Accuframe positioner Passed a PAT test on 11.06.24 Included:2 x Biomek FX start-up training manuals2 x hoses for Masterflex pumps8 x data cables8 x Plexiglass screen panels10 x 719301-AA Fixed Tip Kit8 x Ferrite cable noise screening block5 x work bed fittings4 x airline connectors2 x 10 litre plastic Nalgene solvent bottles

This system was removed from a university lab as surplus to requirements. The lab reported: "Hasn’t  (more)been used for a few years. I am told it was working fine last time. " Genomic Solutions Cartesian Dispensing System ,Honeybee SD 8+1 Active. Model 6PCSDBXL-00. The system in the perspex enclosure was in good working order prior to it being disconnected. There is also included a spare unit which the university was using to provide spare parts. There are eight tube rails each holding 24 tubes. There are two Dell GX520 PC's that both have Microsoft XP pro installed and the software for the honeybee installed. There are no personal data on either of the units and all passwords and usernames have been changed on both. A HP 1702 monitor, usb keyboard and mouse are also included. It also comes with instruction books and a CD-Rom of software with Cartesian AXSYS V81.6.2. Included are the following; Model Honeybee 8+1 Active (complete)Serial No. H2755 Model Honeybee 8+1 Passive (incomplete)Serial No. HSD2756 2 x Dell Optiplex GX520 PCs running Windows XP ProfessionalSerial Nos. JQBJOB1. BBVD891 HP 1702 17" monitor Serial No. CNN407072Y Dell keyboard RT7D50 Serial No. CN-OW7658-37172-58O-08FI Passed a PAT test on 10.06.24The Honeybee unit powered on with power indicator lights showing on the main panel and injection head.A small vacuum pump powered on and generated suction.The first PC powered on but would not boot up properly, the second booted up and loaded windows and showed the software icons.When the icons were selected attempts were made to communicate with the Honeybee hardware but were not successful.The com cables reconnected into different ports but the data link could not be made. Software:Genomic Solutions AxSys Ver 81.6.2 November 2005 Manuals:3 x Genomic Solutions Training Guide V4 May 20061 x Genomic Systems Cartesian Honeybee Bench-top Protein Crystallisation System Operating Manual Version 1.0 January 2003 Included:8 x 24 position tube holders1 x barcode reader1 x small vacuum pump1 x Dell mouse5 x data cables

This Tecan Genesis RSP 100 was removed from a university lab where it was surplus to requirements. T (more)he unit has been tested and is in working order. We were able to control it with the included software. Some of the tips are however bent and will need replacing before the system will work properly. It is in good cosmetic condition with minor marks from use. It comes with:-Novatech PC with Tecan Software -Gemini Robotic Procedure Design Version 4.1.0.0We have the passwords for the software and they will be provided on purchase. Tecan Unit Dimensions - L105 x W78 x H103cm

BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station This was removed from a univer (more)sity lab where it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

Sanyo Ultra Low Temperature Freezer MDF-U3086SBT ULT This was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). The door seals were examined and found to be in poor condition, torn in places and need replaced. For this reason it is sold for spares/repairs. It is in good cosmetic condition both internally and externally. Equipped with a liquid CO2 backup system, this was not testedInner dimensions 51 x 50 x 112cm (w x d x h)

Jobin Yvon Horiba CCD-3500V Detection Unit This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

KK - DURABLE AND HIGHLY CUSTOMIZABLE The KK 500 FIT DS allows the operator to precisely set the temp (more)erature and humidity inside the chamber, as well as control and monitor the light intensity. You can set the temperature from 0°C to 60°C (with the lights off) or from +10°C to +50°C (with the lights on) and thanks to an ultrasonic humidifier, adjust the humidity from 30% up to 90%. The wording 'DS' (Door-Side) indicates that the fluorescent lamps are installed in both the lateral walls and the door. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART PRO control panel is among the most complete you can find on the market. You can manage the instrument and day/night conditions with control of light intensity in an instant, with the large touchscreen. You will save your temperature, humidity and light programs and download the event log, for a professional and precise workflow. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Durable. Tailored. Tailored? Yes! Light panels are made to your specifications, with a range of different wavelength LED options available. As standard, for the KK 500 FIT DS, fluorescent lamps (white light 840 - continuously adjustable) are installed in the side walls and in the door. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm Presentation of the climatic chamber with LED lighting: Together with the climatic chamber you will also receive: DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System. For more information, we invite you to view our article POL-EKO Accessories, where you can find photos and characteristics of all the accessories available for Pol-Eko models. Accessories for KK climatic chambers: - Optional separate controls for each light module - Grid shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Phytotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door - Container for deionized water

Thermo Neslab Merlin M100 recirculating chiller. Capacity 1.8 liters. Max flow rate of 12.5 L/min. T (more)emperature Range from -15°C to +35°C. Stability about ±0.15°C. Digital display resolution can be set to 1°C or 0.1°C. Cooling Capacity at +20°C: 3500 W. P2 - Positive Displacement Pump: 3.0 gpm at 60 psi. Refrigerant R-404A. Dimensions: 77.2*54.0*74.3 cm (HWD); 115.2 kg. USB connection. Effortless maintenance. User manual. The Thermo / Neslab Merlin M100 Recirculating Cooler is compact and has excellent cooling capacity and reliability. This chiller features a unique user-adjustable high and low temperature safety and easy view reservoir with alarm. The Merlin M100 has a built-in internal pressure reducer and flow controller, eliminating the concern of premature wear and making fluid changes easy. The translucent reservoir allows for quick viewing of the liquid level and the removable front panel condenser vent allows easy access for routine cleaning and preventative maintenance. Recommended for biotechnology, pharmaceutical, laser, laboratory, analytical instrumentation, printing, semiconductors, industrial and medical use.