Automated liquid handling

Hewlett Packard HP 6890 GC Gas Chromatograph And Injector This item was removed from a university wh (more)ere it was surplus to requirement. The Hewlett Packard HP 6890 is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed the system was in good working order prior to removal.

Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner has notified us that the needle requires replacement. This item includes:- Phoenix/RE - DeeracFluidics Spot On - Melcor Thermoelectric Temperature Controller MTTC1410 - Various Cables and Wires

This Qiagen QIAcube Nucleic Acid Purification System was removed from a university lab where it was  (more)surplus to requirements. The unit powered up and we were able to run some pre-set programs. It ran these tests well. The lab has confirmed that it was functional prior to removal. We ran a centrifuge program for 3 minutes which ran smoothly and we ran a shaker program for 1 minute which ran smoothly. It is in good cosmetic condition with minor marks from use. It comes with; 4 Boxes Filter Tips 1000ul (1024)10 Boxes Rotor Adaptors (10 x 24)4 Boxes Filter Tips 1000ul Wide bore (1024)

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. The unit appears to pretty much fully work. We have homed the axis and run a basic set of commands with it. We have a video of this working. The Tiploader appears to be faulty as it is not accepting commands from the PC. We have verified that the cable/air and PC are communicating with the Tiploader, by connecting a known working unit to the PC. The known working unit operated fine which proved the included Tiploader to be faulty. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31841Unit dimensions - W77 L92 H82cm 1 x IBM ThinkCentre PCMT-M 8143-34UBiomek Software Version 3.3 installed. 1 x IBM ThinkVision MonitorType - 9417-AB1 1 x Jun-Air CompressorModel 6 The item powers on with the compressor running.Cosmetically it is in a good used condition. 1 x Apple Pro Keyboard 1 x Lenovo Mouse Box of Accessories:-Beckman Coulter AccuFrame2 Power AdaptorsVarious cables and parts9 x 96 Well 0.5ml tube plates

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and passes all self checks. It is in excellent cosmetic condition with minor marks from use. Firmware Version - 2.3-1.2-2.8-2.0Software Version - 2.2.3.1Chips Supported - 178;177;179;186;191

Agilent Technologies 6850 Network GC System with Atas Programmable Injector This system was removed  (more)from a university lab where it was surplus to requirements. The system is in fair cosmetic condition and powers on. However, no further testing was conducted as there is no PC or software available to operate the units. The previous owner reported no known faults but noted that the system has been out of use for several years and would likely need recommissioning. Specifications: - Agilent Technologies 6850 Network GC System - Serial No.: 6850-CN10750008 - Atas Programmable Injector - Serial No.: 36083

This Beckman Coulter Vi-Cell XR Cell Viability Analyzer was removed from a lab where it was surplus  (more)to requirements. The item powers on but we were unable to carry out any further testing. The unit is in good cosmetic condition with marks from use.

Thermo Scientific Cytomat Hotel This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes:-Manual (English Version)-Manual (German Version)

Thermo Scientific Cytomat Microplate Hotel With Towers This item was removed from a university where (more) it was surplus to requirement. It powers on and is in very good cosmetic condition, we are unable to conduct further testing at our facility. Includes the following microplate towers:2 x Cytopmet P237 x Cytomet P69 Also Included:1 x data cable1 x Cytomat Configuration CD

Thermo Finnigan Surveyor HPLC System, Autosampler, PDA Detector & LC Pump This was removed from  (more)a university lab where it was surplus to requirements. The system powers up but has not been tested further at our facility. It is in very good cosmetic condition with minor marks. Included are; ThermoFinnigan Autosampler SurveyorModel: AutosamplerSerial#: 77184Year: 2002 ThermoFinnigan PDA Detector Model: PDA DetectorSerial#: 56847Year: 2002 ThermoFinnigan LC Pump SurveyorModel: Surveyor MS PumpSerial#: 62911Year: 2003

Beckman Coulter Biomek NXp Laboratory Automation Workstation This item was removed from a university (more) lab where it was surplus to requirements. The unit powers on and is in good cosmetic condition with some surface wear. Without the software, the robotic functions were unable to be tested, so no further functional testing was conducted. Model: Biomek NXpSerial No.: A318400876 Additional Components:- DFMZ Design Filtration Microzone - Model: DA1-1x2-2 - Serial No.: 952213 Accessories Included:- Insert Pak 11mm Non-Sterile - Serial No.: 3364 - 2 x Top Plate, Multi-Config Peltier ALP - Part Number: A32165 REV AA - 15 x Reservoirs, 75 ml, Case Sterile - Lot: P61122MPI - Physical Manual: Version 3.3 Tutorial

This Beckman Coulter BIOMEK FX Automated Liquid Handling System was removed from a university lab wh (more)ere it was surplus to requirements. The system is in full working order and was used until very recently. Included in the system are; The system units are in good cosmetic condition. The system consists of the following units: Biomek FX robotic liquid handlerSerial No. 501258024 plate position bedFitted with light curtain, two robotic heads, tip changer, Variomag Teleshake Biomek FX Device ControllerSerial No. 4000A51063 Thermo Electron Microplate HotelSerial No. 40578218With 9 x Cytomat P23 towers and 2 x Cytomat P69 towers Cole Parmer Masterflex Console Drive with twin head bi-directionalModel 7520-c7 Cole Parmer Masterflex L/S Economy Drive with twin head ThinkCentre PC running Windows 7 Professional and installed with Biomek Software Version 4.1Serial No. 1S1OAGS11D00MJ0345JQ View Sonic 17" MonitorModel VS14768Serial No. TT1152621348 Lenovo keyboardModel KU-0225Serial No. SN8134833 Lenovo mouseSerial No. 44HM285 ALP 74cm conveyer with Microscan MS-710 barcode scannerSerial No. FIS-0710-0010 Variomag Teleshake plate shaker with power supply Beckman Coulter Accuframe positioner Passed a PAT test on 11.06.24 Included:2 x Biomek FX start-up training manuals2 x hoses for Masterflex pumps8 x data cables8 x Plexiglass screen panels10 x 719301-AA Fixed Tip Kit8 x Ferrite cable noise screening block5 x work bed fittings4 x airline connectors2 x 10 litre plastic Nalgene solvent bottles

Beckman Coulter Biomek FX Robotic Automated Liquid Handling System This was removed from a universit (more)y lab where it was surplus to requirements. The unit has been tested and is in good working order. The tiploader has been tested with a jun-air compressor which is not included in the sale. The system includes a Dell Optiplex 380 running Windows XP. It has various software installed including Beckman Coulter Biomek 3.3 (Build 14)This allows control of the Biomek FX robot. The other PC contains no Biomek software. The SATA HDD contains an old version of the Biomek software running on Windows NT. Also Included with it are;Stone PC - No softwareBoxed Hard DriveNEC 19" MonitorMicrosoft KeyboardHP MouseBeckman Coulter Integrated Solutions CD

Perkin Elmer Janus G3 Workstation This system was removed from a university lab where it was surplus (more) to requirements. The system is in good used condition, with various marks and signs of general use. Some of the VariSpan tips are slightly bent and will require replacement. The PC has WinPrep 4.9 software installed. The robot was initialized and successfully passed an XY random 100 move test with no errors. System consists of: - Perkin Elmer Janus AJM8001/T Liquid Handler - Equipped with Varispan 8 Tip Arm - Perkin Elmer Peri Pump - Lenovo ThinkCentre PC with keyboard, mouse, monitor, and barcode scanner - Running Windows 7 - Perkin Elmer WinPrep 4.9 software installed (software CDs included) - Riello UPS - Janus Printed User Manual Accessories included:- 16 x Spare Tips - 16 x Spare Tecan 20734804 Cavro Syringes - 5 x Waste Bottles - Various other small parts, spares, and consumables

Beckman Coulter Biomek FXP Laboratory Automation Workstation This was removed from a university lab (more) where it was surplus to requirements. The system has been tested and is in good working order. The tiploader was tested with a compressor (not included). The software is installed on the PC and communicates with the system well. Included are; PC/Accessories:-Dell Optiplex 380Iiyama Prolite B2282HSDell PC & MouseStarview 4 Port USB 2.0 KVM SwitchLots of cables (USB, Ethernet, RS232) Other Parts:-Beckman Coulter FX Device Controller Model - 717635 Inheco TEC Control 96SN - 958Powers on Cole Parmer MasterFlex Console DriveModel - 7520-67SN - G07004011Powers on Spare Beckman Coulter AccuFrameSPRIplate 96 - Ring (AGN - 000322)Removable Gripper Rod (REF-394069)4 x Spare plates2 x Nalgene 2Gal BottlesBox of spare plate stands Consumables included:-1 x Box - Greiner bio-one Cellstar 48 Well Cell Culture Plates Qty - 1001 x Box - Beckman Coulter Biomek AP96 P250 Pipette Tips Qty - 10 Racks2 x Boxes - Beckman Coulter P250 Tips, SPAN 8 Sterile Bar Qty - 5 Packs per box, 10 Racks per pack1 x Box - Beckman Coulter P250 Tip, Sterile Barrier Qty - 5 packs3 x Packs - Starlab 500ul, 96 Well assay plate Qty - 27 (2 packs of 10/1 pack of 7)3 x Packs - Costar 3960 2ml Assembly Blocks Qty - 154 x Packs - Unknown Packs - Qty 201 x Box - Beckman SPAN 8 Tube Tool Kit

Thermo Invitrogen Attune NxT Auto Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was in full working order prior to removal. This item has been refurbished by the manufacturer in 2021. Includes the power supply cable.

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation  Lab This item was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Pyromark Q96 Lab station with plastic liquid container

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software This item was remove (more)d from a university lab where it was surplus to requirements. The system powered on with stable status lights. The previous client stated it was in working order when last used on: 24.05.24. The system comprises: - Beckman Coulter FX Device Controller - Cat No.: 719366 - 3 x Inheco Single TEC Control - Part Nos.: 8900031 - Serial Nos.: 2549, 2564, 2537 - Inheco Thermoshake Plate Shaker & Cooler/Heater - Part No.: 7100146-B - Serial No.: 3080 - Year: 2018 - Thermo Scientific Masterflex P/S Easy-Load ll Pump - Model: 1400-1320 - Serial No.: B13001697 - Pump heads model: 956-0025 - Lenovo ThinkCentre M83 with Windows 7 PRO - Model: S11DOO - Serial No.: MJ03JHRD - Lenovo ThinkVision Monitor - Serial No.: V6-D1101 - Year: 2010 - Lenovo Keyboard and Mouse Software and Manuals Included:- Beckman Coulter install disks - Masterflex P/S 1400 series operating manual - Biomek Tutorials and setup guides Also Included:- Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc. Specifications:- Model: FXp Workstation - Serial No.: A318440537

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. Everything powers up and the system is in good cosmetic condition with some marks from use. There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code 'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100) We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well. This error makes it impossible to home the system. So it could not be tested any further. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31840Unit dimensions - W77 L92 H98cm 1 x IBM ThinkCentre PCMT-M 8113-DA1Biomek Software Version 3.3 installed. 1 x Lenovo MonitorType - 9227-AC1 1 x Lenovo Keyboard 1 x IBM Mouse 2 x Nalgene 2 Gallon Waste/Supply Bottles Box of Accessories:-Beckman Coulter AccuFrameBeckman Coulter Vacuum Valve UnitPower AdaptorVarious cables8 x 2ml Tube holders (24 tube slots in each)94 x 2ml tubesVacuum Manifold Base23mm Spacer Collar PN 71975136mm Collar3 x Thermo Scientific 96 well 0.2ml plates.

Beckman Coulter BioMek NXp Laboratory Automation System Lab This system was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition and powers up. The system includes the following: - Software - PC and monitor - Manual - 40 x boxes of 10 racks of P20 pipette tips - 8 boxes of 10 racks of P250 pipette tips - 1 x Biomek valve Unit - 1 x Inheco TEC Control 96/RS232 - 1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs) - 1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs) - Box of tubing - Box of spare parts and accessories - 1 x light curtain test rod

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3 This was removed from a univers (more)ity lab where it was surplus to requirements. All the units power up but have not been tested further. It is in good cosmetic condition with minor marks. It is made up of the following modules; 1x Tecan RSP 5031 Robotic Sample ProcessorS/N: 1652 JR 1x Emka STC 8808S/N: 00454 1x Emka IOS 3 S/N: 00371 1x Emka Switching UnitS/N: No serial number 1x Haake DC10 CirculatorType: 003-2859S/N: 1WDIN12879

This Applied Biosystems MagMAX Express 96 Particle Processor was removed from a university lab where (more) it was surplus to requirements. The item powers on and is in good cosmetic condition with some marks from use. The table Rotation works, but we were unable to test it further without software. Ambion MagMAX 96 Total RNA Isolation Kit Instruction Manual12 x Processing Plate & Lid (PN-10038GA1)

Eppendorf epMotion 5075 Liquid Handler Laboratory Automation Robot & Software This was removed f (more)rom a university lab where it was surplus to requirements. The unit powers up and the system and the PC communicate. We were able to get the tool holder to unlock and lock. It is showing a temperature unit module 1 issue. It is in good cosmetic condition with marks from use. Model - epMotion 5075SN - 5075 01005 Siemens Simatic PCEppendorf 6BK1800-0EP00-0AA0 Monitor not included.

Redd & Whyte Preddator Liquid Handling Robot System This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up, passes all self-checks and the arm moves. It is in good cosmetic condition with minor marks from use. There is a laptop with it, which unfortunately has had the hard drive removed and has no software. There are a lot of discs supplied but none are the control software for the system. 1x Windows XP Professional Installation CD 20021x Dell Monitor Software CD1x Dell Installation Software CD1x Windows XP Professional Installation CD, discs1, 2, 3 and 41x Datalogic WinHost 2.00 Configuration CD 20041x Moxa Networking CD1x Windows XP Professional Guide Pamphlet

This item has just arrived in our stock. Please enquire for further details.

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it. The system consists of: 1 x Beckman Coulter Biomek NXp Robot.s/n A318410173.Cat No A31841.96 Well head. 1 x Beckman Coulter Tiploader. 1 x Beckman Coulter AccuFrame. 1 x Microscan MS-3 Laser (Barcode Reader) 1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

Perkin Elmer PYRIS Diamond DSC Differential Scanning Calorimeter & Autosampler This was removed  (more)from a university lab where it was surplus to requirements. The unit runs and communicates with the software but has not been recalibrated. This requires the use of gas, which we are not permitted to do on our site. The unit has been partially serviced. A report is available on request. The dongle for the software is not included. The chiller unit has not been serviced. Included are; Perkin Elmer PYRIS Diamond DSC Differential Scanning Calorimeter & AutosamplerPart no. N5360025SN - 536N2011101 Perkin Elmer Intracooler 2P Cooling AccessoryModel no. FC100PED1SN - 18256 Dell Optiplex 380

Hudson Solo SOL9 Liquid Handler This item was removed from a university lab where it was surplus to  (more)requirements. The robot is in very good used condition and has been successfully tested for communication with the includedsoftware. The previous client has confirmed it being in working order. System Includes:- 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU) - 4 x 10cm Tall Nests - 2 x 6cm Tall Nests - 1 x 4.5cm Nest - 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units: - 1 with a TPS 620-5033 plate - 1 with a TPS 620-5045 plate - 2 x PSU's - 1 x BioShake Heated Shaker Plate (marked as faulty) - 2 x Boxes of 1000ul Pipette Tips (all sealed inside) - 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed - 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Thermo Scientific Spinnaker Robotic Arm F01981 Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate. This item also includes the following: - Emergency Stop Button - MicroPlate Mount

Dionex ICS-2000 Ion Chromatography System & AS40 Automated Sampler This was removed from a unive (more)rsity lab where it was surplus to requirements. The system has been professionally serviced and is in full working order. A full report is available on request. The system is in good cosmetic condition with minor marks. Included are; Dionex Ion Chromatography SystemModel - ICS-2000SN - 04050165 Dionex Automated SamplerModel - AS40-1SN - 04080222