Agilent 1100 1200 HPLC G1313A Automatischer Probengeber Autosampler

This Beckman Coulter Biomek 2000 Laboratory Automation Workstation was removed from a university lab (more) where it was surplus to requirements. The item powers on but is unable to be tested further without software. The item is in a reasonable, used cosmetic condition with marks and scuffs. It comes with a sealed box of Beckman P 20 Pipette Tips (20ul)

Qiagen QIAcube Automated DNA / RNA Purification Robot This was removed from a university lab where i (more)t was surplus to requirements. It is in good cosmetic condition internally and externally, other than a missing panel covering the power button. Error 5167 happens when attempting to close the centrifuge lid because it is stuck open.Error with the centrifuge: cover opens before lid moves. We were unable to test this further. Therefore this item is sold as Spares or Repairs.

This Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler was removed from a university lab (more) where it was surplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a start-up self-test that displayed the motor in good working order, we are unable to test this item further at our facility.

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university (more) lab where it was surplus to requirements. All units are in good used cosmetic condition but they do have various signs of general use. The system consists of: 1 x Beckman Coulter Biomek Fxp CAT No A31842.The unit powers up and both lights illuminate Green. It was not tested any further.The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included. 1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.It comes with:2 x Stacker 10 hotels.2 x FX Stacker 10 hotels.1 x Stacker Carousel Pendant.The mounting plate to connect it to the Fxp is included.It also comes with a spare Microscan, operational condition is unknown. 1 x Lenovo PC with monitor, mouse & keyboard.It has the Biomek Version 3.3 software installed. 1 x Jun-Air 1795001 Compressor. The system also includes quite a few plates and consumables and various connection cables.

This was removed from a university lab where it was surplus to requirements. Included are; Gilson 26 (more)8 PipetmaxModel no. 32100001SN - 321D6A042Unit dimensions - L63 W52 H70cmThe item powers on and is in reasonable used cosmetic condition, there are a few cracks around the unit on the perspex covers. Windows TabletModel no. 32000321SN - 66MCV22The tablet automatically starts up Gilson Trilution Software. We have the password available on purchase. Gilson Model GCP Dell DocSN - G00M-A00 3 x Gilson Dongles:-LT3204USB PIPETMAX Docs v2 Reference Docs 1.1LT3203USB TRILUTION micro V2 Documentation v1.2Blue Dongle labelled Trilution Gilson 5mm Allen Wrench (4320502)AC Power Adaptor Consumables:-6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 50μl (15 x 96 Tips in Racks) Full & Sealed inside1 x Box of Eppendorf epT.I.PS. Motion 1 - 50μl (10 x 96 Tips in Racks) 9 Sealed inside6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 20-300μl (15 x 96 Tips in Racks) Full & Sealed inside1 x Box of Eppendorf epT.I.PS. Motion 1 - 20-300μl (11 x 96 Tips in Racks) Sealed inside16 x Boxes of Gilson DL10 Diamond Reload Packs (960 Tips per box Volume Range 0.1 - 20μl)1 x Box of Gilson DL10 Diamond Reload Packs (257 Tips in box Volume Range 0.1 - 20μl)18 x Boxes of Gilson DL200 Diamond Reload Packs (960 Tips per box Volume Range 2 - 200μl)1 x Box of Gilson DL200 Diamond Reload Packs ( 192 Tips in box Volume Range 2 - 200μl)

Manufacturer: YMC Model: YMC Hydrosphere C18 Part Number: HS12S03-1004QT S/N: 0410010197 Features: + (more) Based on highly inert, ultra pure, pH neutral silica+ "Hydrophilic" C18 surface for enhanced polar selectivity+ Extremely rigorous physical and chemical specification+ suitable for conventional reversed phase and highly aqueous application+ Pharmaceutical method development Particle Size (µm): 3 Pore Size (Å): 120 Length (mm): 100 Internal Diameter (mm): 4 Solid Support: Ultra-pure Silica Format: Column Used, good condition - fully functional.

Under-bench cabinet depth 51cm - Length 96cm Laboratory cabinet Length: 96cm Depth: 51cm Height: 71c (more)m In melamine 2 doors On casters (hidden by the finishing profile) In good condition Slightly oxidized hinges and some small traces of wear (see photos)

Speed range: 30 to 240 rpm Rotary evaporator from IKA, type RV 05 Excluding glassware, tripod and wa (more)ter bath.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Julabo DYNEO DD-1000FW Refrigerated Circulator with Digital Output, 115V/60Hz Working Temperature Ra (more)nge -50°C to 200°C Cooling Capacity 1000W at 20°C Refrigerant R449A Features - Powerful cooling - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 The Julabo DYNEO DD-1000FW Refrigerated Circulator with Digital Output, 115V/60Hz features an operating range of -50…+200°C and ± 0.01°C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multilingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (5-7.5L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 1kW cooling power at 20°C with 110W at -40°C. Options for heating power (1kW or 2kW). 1000FW: cooling water connections G 3/4″ male; contains R449A synthetic refrigerant. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo DYNEO DD-1000FW Refrigerated Circulator with Digital Output, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - G 3/4" Female to 1/2" Hose Barbs for Water Cooling Circuit - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MTS 2/4 Digital Microtiter Shaker Type of Movement Orbital Speed Range 0 - 1100 rpm Shaking str (more)oke 3 mm Features - Designed for shaking two or four microtiter plates simultaneously - Digital timer with a 7 segment LED display, adjustable from 1 to 99 minutes, and includes an alarm function - Operates in both timer and continuous operation modes - Orbital shaking movement with a 3 mm orbital diameter for gentle yet effective mixing - Compact design with dimensions of 185 x 105 x 320 mm and a weight of 3.216 kg The IKA MTS 2/4 Digital Microtiter Shaker is tailored for efficient agitation of two or four microtiter plates simultaneously. It features a digital timer with a 7 segment LED display, allowing precise adjustment from 1 to 99 minutes and includes an alarm for notification upon completion. Operating in both timer and continuous modes, this shaker employs gentle orbital motion with a 3 mm diameter to ensure thorough mixing without compromising sample integrity. Compact and robust, it measures 185 x 105 x 320 mm and weighs 3.216 kg, making it an essential tool for laboratory environments requiring reliable plate shaking capabilities.INCLUDED: The IKA MTS 2/4 Digital Microtiter Shaker includes: - MTS 2/4 digital microtiter shaker - Socket wrench - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA MTS 2/4 Digital Microtiter Shaker Specifications Type of movementorbitalShaking stroke3 mmPermissible shaking weight (incl. attachment)1 kgMotor rating input35 WMotor rating output13.5 WPermissible ON time100 %Speed min (adjustable)50 rpmSpeed range0 - 1100 rpmSpeed displayscaleTimer yesTimer display 7 segment LEDTime setting range 1 - 99 minOperating modetimer and continuous operationWorking with microtiter platesyesNumber of microtiter plates2 or 4Dimensions (W x H x D)185 x 105 x 320 mmWeight3.216 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 W