Baths / circulators

Water bath tank, plastic; 19 L Can operate between -40 and 110 degrees Celcius Suitable for Corio C or CD heating-immersion circulators

Julabo BT19 water bath tank

This listing is for a Aurora scentific water bath

Aurora Scientific Water Bath

This listing is for a Nickel Electro Water bath

Nickel Electro Water Bath

This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides   Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl  Dims 33cm (D) x 28cm (W) x 14cm (H)

Raymond A Lamb E65 Paraffin Section Flotation Bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the ideal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the bain-marie is used to maintain costant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Bain-marie LAUDA Hydro H16A

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the ideal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Laboratory water bath LAUDA Hydro H22

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

LAUDA Hydro H 20 S water bath with linear stirring

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or beakers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

LAUDA Hydro H 6 V ring water bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the ideal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Laboratory water bath LAUDA Hydro H8

Bain-marie LAUDA Hydro H41

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the ideal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the water bath is used to maintain constant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

LAUDA Hydro H8A water bath

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

LAUDA Hydro H 19 V ring water bath

Laboratory water bath LAUDA Hydro H4

Laboratory water bath LAUDA Hydro H24

LAUDA Hydro H 5 V ring water bath

Refrigeration bath KB 08-40 FRYKA Main features: - Refrigeration unit: silent, fully hermetic, sealed, air cooled, low maintenance - Parts of the casing made of stainless steel - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Refrigeration bath KB 08-40 FRYKA

LAUDA Hydro H 9 V ring water bath

LAUDA Hydro H 11 V ring water bath

Histological water bath from 25°C to 80°C for the laboratory This water bath model is used in histological, chemical, clinical and bacteriological laboratories for stretching and drying tissue samples. The exact temperature control of the LAUDA Hydro H 2 P water bath ensures clear visibility of the sample and gentle drying even on the heated edge. The instrument operates in a temperature range from 25 to 80°C with a constant temperature of ± 0.5 K. The body of the bath is made of black anodized aluminum. The low height of the bowl allows comfortable and safe work. - Temperature adjustment by knob with temperature scale - Temperature display by means of a reference thermometer on the edge of the pool - Tank interior in black anodized aluminum If you want to know more about water baths in histopathology and new histotechnologies in general, we recommend the HistoTube YouTube channel. Accessories Lid, to cover the bath interior, made of black anodised aluminium, with ball handle.

Histological water bath LAUDA Hydro H2P

Laboratory water bath LAUDA Hydro H16

This listing is for a Clifton Unstirred Water Bath

Clifton Unstirred Water Bath

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover) New equipment in its original packaging Memmert reference: SV2945 Stirring device with support frame for 29 L and 45 L Memmert water and oil baths

Memmert SV2945 Stirring device with support frame for 29 and 45 L models (requires special cover)

Digital temperture control and selectable display of set and actual temperature PT100 sensor Timer 1 to 99 min with audible alarm Overheating protection (even when bath is empty) Capacity: 16L Outer dimensions(w x d x h): 331mm x 396mm x 265mm Bath dimensions(w x d x h): 290mm × 300mm × 190mm Weight: 10kg Including rack with 36 spaces

Funke Gerber WB 436-D Water Bath

Benchmark MyBath 4L Digital Water Bath The myBath series is designed to guarantee superior accuracy and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. The 4L model includes easy to use controls allow the user to digitally select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL feature allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination. The 4L model includes a see-through cover that can be removed, or flipped back on a rear hinge to conserve bench space. The lid’s gabled design will divert condensation to the front and back of the bath, away from samples. Racks are available to accommodate 1.5/2.0ml, 15ml and 50 ml tubes. The myBath 4L is supplied with all three racks. INCLUDED: The Benchmark MyBath 2L Digital Water Bath  includes: - Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark B2000-4 MyBath 4L Digital Water Bath

Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range  20°C to 100°C Heating Capacity 1000W Volume 13L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified)  includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified)

Yamato CB-100 Benchtop Water Circulator 3.4L, 115V Cooling Capacity   230W at 10C Operating Temperature Range -10 to 80°C Temperature Accuracy  ±0.1°C Features - High head and flow rate: Lift is ~3.3/4.7m (50/60 Hz), which is very high in this class, so even piping with pressure loss can be circulated sufficiently. In addition, the maximum flow rate is as large as ~6.8/8.0L/min (50/60 Hz).The lift and flow rates allow stable circulation even when installed under a desk. - Easy to clean intake filter: Filter mounting plate located on the front of the unit can be easily removed when cleaning - Standard equipped with drain: Maintenance work such as replacement of liquid can be easily performed. After use, it can be stored in the space inside the main unit. - Nozzle can be used in any orientation: Since the nozzle is freely rotatable, it can be installed in any direction - Compact: With a width of 180mm and a depth of 360mm, it is ideal for limited spaces - Low GWP value that is friendly to the global environment: Since the alternative CFC refrigerant R-134a is used, the global warming potential is as low as 1430, good for the global environment. Benchtop 3.4L water circulator with a wide temperature range of -10 ~ 80°C used for various applications.  I's high head and flow rates allow stable circulation even when placed under a desk.INCLUDED: The Yamato CB-100 Benchtop Water Circulator 3.4L, 115V  includes: -  Power Cord -  Operator's Manual -  Manufacturer's Documentation -  1 Year Manufacturer's Warranty

Yamato CB-100 Benchtop Water Circulator 3.4L, 115V

Grant Y14 Precision Thermostatic Bath. Capacity 14 L. Digital control. Temperature range from ambient +5 °C to 100 °C. Water circulation to achieve accuracy of ±0.2 °C at 37 °C. High quality stainless steel tank, corrosion resistant. Roof type lid. Overheat protection. Low water level alarm. Dimensions (WDH): tank 300*240*150 mm; external 380*330*330 mm. Manual not available. Elevate the precision of your laboratory with the Grant Y14 Precision Thermostatic Bath, available at Galileo Equipment. This 14 L unit features digital control and a temperature range of +5 °C to 100 °C, ensuring unmatched accuracy. Its robust, corrosion-resistant stainless steel design includes a canopy-type lid and overheat protection and low water level alarm systems. Perfect for researchers looking for reliable and consistent results. Find out more at www.galileoequipos.com.

Grant Y14

Lauda ECO RE 630 Water Bath with &nbsp;ECO Silver Circulator This was removed from a university lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

Lauda ECO RE 630 S Water Bath with  ECO Silver Circulator Lab

Thermo Scientific Haake A28 Chiller Lab This item was removed from a university where it was surplus to requirement. It is in good cosmetic condition and holds water with no leak, however, as there is no controller included so we are unable to conduct further testing.

Thermo Scientific Haake A28 Water Bath Lab

IKA ICC 150 Lite Pro 9 Open Bath Heating Circulator Working temperature Room Temp. to 150°C Capacity 9 L Flow Rate Max. (0 Bar Back Pressure) 15 l/min Features - High-quality compact immersion circulator designed for efficient operation - PID temperature control ensures precise and reliable performance - Integrated pressure/suction pump for internal and external applications - LED displays for working and safety temperature readings - Optical and acoustic warning functions for added safety - Adjustable safety circuit with a range of 0 to 160°C - Sub-level and over-level protection for secure operation - Flow rate of up to 15 l/min for versatile use - Lightweight and compact design with dimensions of 5.3 x 11.9 x 7.1 in. The IKA ICC 150 Lite Pro 9 Open Bath Heating Circulator is a high-performance immersion circulator designed to deliver precise and reliable temperature control in demanding laboratory applications. Featuring advanced PID technology, it maintains stability to ±0.05 K across a working range from room temperature to 150°C. Its integrated pressure/suction pump supports both internal and external circulation, making it versatile for a variety of uses. Clear LED displays provide real-time readings for working and safety temperatures, while optical and acoustic warnings enhance operational safety. Engineered for convenience and dependability, the ICC 150 Lite Pro 9 includes sub-level and over-level protection to ensure secure operation. The adjustable safety circuit, with a range of 0 to 160°C, provides additional peace of mind. With a flow rate of up to 15 l/min and compact dimensions of 5.3 x 11.9 x 7.1 in., this lightweight unit is designed for efficient operation and easy integration into laboratory workflows. Built to comply with DIN 12876 standards, it’s the ideal solution for precise temperature management. INCLUDED: The IKA ICC 150 Lite Pro 9 Open Bath Heating Circulator  includes: - ICC 150 lite Compact Immersion Circulator - IB 9 pro Stainless Steel Bath - BS.ICC lite Small Bath Bridge - Screwdriver for Safety Circuit - Power Cord - Operators Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty