Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Brand
Lauda
Supplier
Jointlab srl
Location
Milano - Italy
Price
€2,508.00 
(€2,984.52 incl. VAT*)*if applicable
This item is
for sale
State of item
new
Categories

LAUDA Hydro H 20 S stirring water bath

Jointlab srl€2,508.00 
(€2,984.52 incl. VAT* )* - if applicable
item image

Description by the supplier

Laboratory Water Bath with 25°C to 99.9°C Range

This LAUDA Hydro series laboratory water bath enables precise temperature control with both linear and orbital shaking mechanisms, ideal for a variety of laboratory applications including biotechnology, medicine, and biochemistry. A hallmark of reliability, the water baths ensure even temperature distribution for optimal experimental conditions.


Inclusive of an integrated speed controller, the device allows an uninterrupted and adjustable stirring motion with a gentle start. The H 20 SW and H 20 SOW variants come standard with a cooling coil, enhancing the range of temperature control down to a minimum of +10°C when connected to domestic water supplies or commercially available circulating chillers.


Quality Features


- Precise temperature regulation with LED display

- Smooth, load-independent, and adjustable stirring operation

- Dual fuse electronic thermoregulator monitoring for overheating and underheating protection

- Stainless-steel constitution of the tank, frame, cover, basket, and heating elements

- Condensation Shielding Lid designed to reduce heat loss and eliminate condensate drip onto your samples


Operations

All water baths include a perforated pan as standard, eliminating the need for racks. The drain valve is conveniently located on the rear side for efficient drainage.


Control Panel

The control panel comprises an easily readable TFT display and dirt-resistant and water-resistant membrane keyboard. It guides you through the proper operation of the water baths.


Potential Applications


- Bacteriological and Molecular Biological Studies

- Demulsivity Investigation

- Chemical Reactions Processing

- Samples Thawing

- Metallurgical and Environmental Analysis

- Microbiological Assays Incubation

- Reagents Heating

- Food Processing Quality Control

- Water Quality Research

- Cytochemistry


Available Accessories

Add a water level regulator for uninterrupted use even at temperatures below ambient temperatures and prevent water loss.


Stainless-steel heating elements situated directly beneath the sieve plate promote even temperature distribution, with electronic monitoring and independent fuses for ultimate temperature control.


The equipment features improved visible and audible alerts for enhanced sample safety. The angled control elements provide splash protection and improved operation comfort.


Appropriately maintain water level using the max fill marker to prevent overflow. The sieve plate can be easily detached for efficient cleaning.


Materials

Made of the highest quality materials, the interior, lid, sieve, and heating elements are all stainless-steel. The double-walled lid is thermally insulated, internally curved to direct condensate.


Cleaning

Any limescale accumulation within the water bath can be effectively removed with commercial descalers. The detachable internal tray makes cleaning a breezy operation.


Recommended Accessory

- Water level regulator to compensate for evaporation and maintain water level stability. It can enable usage at temperatures about 3°C above tap water temperature.

Product details
Temperature °C25...100
External dimensions mm L x P x A715x520x330
Tank volume l9 L min.
Tank volume l24.4 L max.
Temperature stability+/- 0,1 K
Power W1.5 kW
SeriesHydro
Bath measures WxDxH (mm)450x300x160
Shaking Motionbidirectional / linear
Shaking Frequency10 - 250
Shaking Amplitude mm22
Weight kg28
Supply230 V / 50-60 Hz
About Jointlab srl

Jointlab.com is a website of professionals for scientific instrumentation. With us you will have answers that others will not give you. From magnetic stirrers to laboratory pumps. From electronic scales to safety cabinets: the whole world of the laboratory in jointlab.com!

About QuestPair

QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.

Related items:
LAUDA Hydro H24 water bath-cover
LAUDA Hydro H24 water bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

€1,180.00 ex VAT
€1,404.20 incl. VAT if applicable
Italy
baths or circulators
LAUDA Hydro H 8 water bath-cover
LAUDA Hydro H 8 water bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

€951.00 ex VAT
€1,131.69 incl. VAT if applicable
Italy
baths or circulators
People are watching right now:
Oxion OX.2253-PLF-cover
Oxion OX.2253-PLF

Microscope trinocular inverted for fluorescence Oxion OX.2253-PLF with stage mechanical PL Fluarex 1 (more)0/20 / 40x - Rail for 2 filter blocks and with carrying case. SPECIFICATIONS EYE Plan eyepieces DIN wide field HWF 10x / 22 mm HEAD Head trinocular, inclined 45 °. Adjusting the interpupillary distance on the tube-holder left eyepiece • The interpupillary distance is adjustable from 54 to 75 mm • Output trinocular upright for photo/video and selector image 100:0% and 80-20%. REVOLVER HOLDER OBJECTIVES Revolver holder objectives quintuple oriented towards the interior. OBJECTIVES • Objectives long working distance (LWD) Plan Fluarex with correction to infinity. Magnification factors of 10x/0.30, 20x/0.45 and 40x/0.65. All the optics are coated with anti-fungal and anti-reflective to obtain the maximum performance of the light APPROACH Controls, macro focus and fine on-axis coaxial. Precision 2 μm, a total distance of approximately 24 mm. STAGE Plate 250x230mm with stage mechanical X-y 120 x 78 mm Is supplied with the following accessories: · Metal plate for Ø 35mm for the crop. · Plate for fastening of preparations of 76x26mm. · Glass plate. CAPACITOR A. N. 0.30 iris diaphragm. Working distance 72mm. ILLUMINATION FOR FLUORESCENCE It is supplied with 2 filters for fluorescence: · Blue: EX465-495 (BP) DM505 (LP) EM515-558 (BP) · Green: EX520-600 (BP), DM600 (LP) EM605-665 (BP) LIGHTING Transmitted 5W LED with adjustable intensity and internal transformer for 100-240V power. Fuse 3.15 A / 250V. PACKAGING Supplied with power cable, cover anti-dust and manual of instructions.

€10,556.00 ex VAT
Spain
general laboratory equipment other
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]