Clifton Unstirred Water Bath

Lauda Eco Gold with Lauda Eco RE 420 Refrigerated Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 13L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the P (more)olyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE02A11B 2L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Manufacturer's Documentation - Power Cord - Operator's Guide - Full 2 Year Parts and Labor Warranty Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz SpecificationsKey SpecificationsDescriptionGen. Purpose Water Bath, Digital, 2 LDisplay3.25" LCDWorking Temperature Range CAmbient +5° to 100°Temperature Stability C±0.1°Temperature Calibration Capability1-pointWorking Access (L x W x D) (cm)9.9 x 10.9 x 15.2Flammability Class (DIN 12876-1)I (NFL) 60 Hz OnlyPart NumberWBE02A11BIncluded HardwareSample TrayHeater Wattage120Electrical Requirements (VAC/Hz/Ph/A)120/60/1/1.1Regulatory ApprovalsETL Comparison of ModelsSpecificationWBE02A11B 2LWBE05A11B 5LWBE10A11B 10LWBE20A11B 20LWBE28A11B 28LDescriptionGen. Purpose Water Bath, Digital, 2 LGen. Purpose Water Bath, Digital, 5 LGen. Purpose Water Bath, Digital, 10 LGen. Purpose Water Bath, Digital, 20 LGen. Purpose Water Bath, Digital, 28 LDisplay3.25" LCD3.25" LCDFull-color TFTFull-color TFTFull-color TFTWorking Temperature Range (°C)Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Temperature Stability (°C)±0.1°±0.1°±0.1°±0.1°±0.1°Temperature Calibration Capability1-point1-point1-point1-point1-pointWorking Access (L x W x D) (cm)9.9 x 10.9 x 15.212.7 x 27.4 x 15.226.9 x 29.5 x 15.224.1 x 43.2 x 15.224.1 x 43.2 x 15.2Flammability Class (DIN 12876-1)I (NFL)I (NFL)I (NFL)I (NFL)I (NFL).comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Selecta DIGIT-COOL circulation ultrathermostat. Digital. Adjustable temperature from ambient to 100  (more)ºC. Stability ±0.01 °C. Pt100 sensor. Circulation pump 150 mbar. Adjustable flow rate up to 12 l/min. Safety thermostat and fluid level buoy. Selectable maximum and minimum alarm and working temperatures. (HWD): 450*210*510mm; 22 kg. Consumption: 1.4600 W. User manual. The DIGIT-COOL Selecta Circulation Ultrathermostat is high quality equipment designed to precisely control temperature in laboratory applications and industrial processes. With its easy-to-read digital display and intuitive controls, this thermostat ensures precise and stable temperature control, making it ideal for a wide range of applications. This ultrathermostat features efficient internal circulation that ensures uniform heat distribution, resulting in a homogeneous temperature throughout the system. Additionally, its compact and robust design makes it easy to install and operate, making it an excellent choice for laboratories and industrial plants. With a wide range of temperature settings and exceptional accuracy, the DIGIT-COOL Selecta Circulation Ultra Thermostat is a reliable and versatile tool for any work environment requiring precise temperature control. Its advanced technology and exceptional performance make it an ideal choice for applications requiring precise temperature control. The DIGIT-COOL immersion thermostat allows you to regulate the temperature of the liquid from 0ºC to 100ºC with a stability of 0.1ºC. The thermostats are equipped with: - Pt100 resistance thermometer temperature sensor. - Circulation pump with adjustable flow for agitation. - Cooling coil to regulate room temperature by connecting to mains water. - Safety thermostat and fluid level buoy. - Selectable upper and lower alarm temperature. - Selectable maximum and minimum working temperature. - Selectable reading correction. - RS232 connection. - Reading in degrees Fahrenheit or Celsius. Accessory not included with the possibility of supply: stainless steel bucket, lid with canopy or with reducing discs, frame and racks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leybold Trivac D40B & RUvac WAU251 Vacuum System This item was removed from a university laborat (more)ory where it was surplus to requirements. This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site. Specifications: Leybold RUVAC: - Type: WAU251 - Catalog No.: 11721 - Serial No.: B891200093 Leybold TRIVAC: - Type: D40B - Catalog No.: 112 86 - Serial No.: A881100069

Benchmark H5100-20 35 x 2.0ml Block for MultiTherm Touch The Benchmark H5100-20 35 x 2.0ml Block for (more) MultiTherm Touch is designed for use with the Benchmark H5100-HCT MultiTherm Touch Heating and Cooling Shaker. The H5100-20 is compatible with the H5100-HL Heated Lid. INCLUDED: The Benchmark H5100-20 35 x 2.0ml Block for MultiTherm Touch includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

AM4 Digital is the solution for laboratories that need precise control of sample temperature and max (more)imum reproducibility. Among its qualitative features we can find the possibility of connecting the Pt100, Pt1000 probes and the VTF digital thermoregulator, for accurate and direct control of the sample temperature. The CerAlTop™ plate, in aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface, as well as high resistance to chemical agents and scratches. Designed to last and give you the comfort you need in the laboratory, the AM 4 Digital Multi-Position Magnetic Stirrer is covered by a 3-year warranty (online product registration required). In short: - Ceramic coated aluminum alloy - Electronic speed regulation up to 1500 rpm. - Stirring volume (H2O) up to 20 liters per position. - Temperature up to 310°C. - Connections for PT100, PT1000 and VTF 1 - Aluminum alloy plate with ceramic coating  2 - Main switch 3 - Speed ​​control knob 4 - Temperature control knob 5 - Visualization A - Probe LED B - Temperature setpoint LED The powerful brushless motor ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The consistently precise stirring speed, from chemical reactions to sample preparation, is adjustable from 50 to 1500 rpm for volumes up to 20 liters (H2O). The LED displays will always allow you to easily read the values, from any angle. For maximum precision, by connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C up to a maximum of 300°C. In this regard, various accessory packages are available. You will find all the combinations at the bottom. Safety during heating: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm The new spherical caps replace the oil baths and heating mantles. They adapt perfectly to both the 135 mm plate and the shape of the tubes, ensuring rapid heat transfer. To improve protection and reduce heat loss, VELP has designed new PTFE covers. The MultiAlublock™ and new MonoAlublock™ solutions are ideal for carrying out multiple stirring and heating analyzes in laboratories with limited space and time. Download the dedicated brochure for the complete list.

Antistatic ionizer is used to remove overflow of mainly plus ions, and also minus ions from the load (more) and elements of a balance and the environment. Electric charges of the air are neutralized by the ionizer enabling reaching a quasi-balance of plus and minus ions. Unbalance of plus and minus ions in the air frequently causes unwanted electric influences (attraction or repulsion) of elements which are in small distance to each other. It is a usual phenomenon for non-conducting materials (i.e. plastic, glass). As some of balance elements are made of plastic and glass, this problem can considerably affect their operation and measurement results. The influence of electrostatics appears in a form of multiplied repeatability error or as multiplied error of indications.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.