Julabo PURA 22 Water Bath, 115V/60Hz

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Capacity: 17 L Max temperature: 100°C Max flow rate: 17 L/min Max pump pressure: 300 mbar Dimensions (more) (DxWxH): 457 x 381 x 456 mm Weight: 13.7 kg

Multi Job Lot Mixed, Centrifuge, Shaker, Power Supply, Water Bath etc This job lot of items come fro (more)m a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-38313 Eaton EX3000 RT Uninterupted Power Supply with 3 x Eaton EX EXB Battery UnitsITEM-38562 GE Digital Energy LP 5-11ITEM-37843 Hettich Mikro 12-24 CentrifugeITEM-37844 Genofuge 16 M CentrifugeITEM-37845 Heraeus Biofuge 13 Centrifuge ITEM-37803 Stuart Scientific S1 20H Oven ShakerITEM-37804 Pharmacia Frac-100 Fraction CollectorITEM-37805 Buchi HB-140 Boiling BathITEM-37806 Fisher Scientific PowerGen 125 HomogeniserITEM-37807 Edwards RBF1 Vacuum Pump CompressorITEM-37846 Mitsubishi Video Copy Processor P67EITEM-37847 Sony Video Graphic Printer UP-895CEITEM-37848 Denver Instrument Company DE Series DE SeriesITEM-37810 Collection of 6 Chromatography Columns, Pharmacia Uppsala LKBITEM-37849 LaCie D2 HD QuadraITEM-37850 Zeiss Stemi SV 6ITEM-37851 FisherBrand WhirliMixerITEM-37500 Model R100 Rotatest Shaker LuckhamITEM-37510 Sorvall PicoITEM-37509 Grant JB1 Water BathITEM-37508 Grant JB1 Water BathITEM-37814 3 x Pharacia LKB Frac 100 Fraction CollectorsITEM-37507 Polaroid 545 Land Film holder With Filter Box

Huber 2 Litre Water Bath w/ Polystat CC3 Thermostat Lab This item was removed from a university wher (more)e it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).

Lauda Eco Gold with Lauda Eco RE 420 Refrigerated Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Julabo SW22 Shaking Water Bath 115V/60Hz (NRTL Certified) Working Temperature Range 20°C to 99°C Sh (more)aking Speed Range 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW22 Shaking Water Bath 115V/60Hz (NRTL Certified) includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a D3024R Refrigerated Micro-CentrifugeFeatures:User-friendly large LCD display p (more)rovides all visual informationQuiet and stable operation benefit lab environmentBrushless motor drives quickly and effortlessly accelerates the rotor to set speedFully autoclavable Bio-safe rotorDual door interlock design, more safeGently braking at low speed, better separationSpecifications:Max. Speed: 15000rpm (200-15000rpm), increment: 10rpmMax. RCF: 21380—g, increment: 10—gRotor: 1.5/2mlx24 (included), 0.2/0.5mlx36 (supplied separately), 5ml round bottom x18 (supplied separately), 5ml eppendorf x12 (supplied separately), PCR8x4 serial tubes (supplied separately)Run Time: 30sec~99min~HOLD (Continuous operation)Driving Motor: Brushless motorAdditional Features: Speed/Acceleration switch; Short-time run function; sound-alert functionSafety Devices: Dual door interlock, Over-speed detector, Over-temperature detectorAutomatic internal diagnosisTemperature Range (D3024R): -20 °C to +40 °C

This was removed from a university lab where it was surplus to requirements The unit powers up and w (more)orks but has a faulty CO2 sensor. It is sold for spares/repairs.

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: flat polygonal sheet Nominal value: 5 mg Material: aluminum F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

F2 Mass Standard - carrier weights. Nominal value - 1 kg.

RS 232 cable: weighing device (HRP, MWSH, MWLH) – computer with a plug for connecting the SYS- (more)1544-2415-T3-HRP power supply. Cable length: 5 m Compatible with: HRP Platforms MWSH Weighing module MWLH Weighing module