Nickel Electro Water Bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Grant JB Aqua 18 Plus Water Bath Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition, however the handle has snapped off, this does not affect its functionality.

Multi Job Lot Mixed, Centrifuge, Shaker, Power Supply, Water Bath etc This job lot of items come fro (more)m a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-38313 Eaton EX3000 RT Uninterupted Power Supply with 3 x Eaton EX EXB Battery UnitsITEM-38562 GE Digital Energy LP 5-11ITEM-37843 Hettich Mikro 12-24 CentrifugeITEM-37844 Genofuge 16 M CentrifugeITEM-37845 Heraeus Biofuge 13 Centrifuge ITEM-37803 Stuart Scientific S1 20H Oven ShakerITEM-37804 Pharmacia Frac-100 Fraction CollectorITEM-37805 Buchi HB-140 Boiling BathITEM-37806 Fisher Scientific PowerGen 125 HomogeniserITEM-37807 Edwards RBF1 Vacuum Pump CompressorITEM-37846 Mitsubishi Video Copy Processor P67EITEM-37847 Sony Video Graphic Printer UP-895CEITEM-37848 Denver Instrument Company DE Series DE SeriesITEM-37810 Collection of 6 Chromatography Columns, Pharmacia Uppsala LKBITEM-37849 LaCie D2 HD QuadraITEM-37850 Zeiss Stemi SV 6ITEM-37851 FisherBrand WhirliMixerITEM-37500 Model R100 Rotatest Shaker LuckhamITEM-37510 Sorvall PicoITEM-37509 Grant JB1 Water BathITEM-37508 Grant JB1 Water BathITEM-37814 3 x Pharacia LKB Frac 100 Fraction CollectorsITEM-37507 Polaroid 545 Land Film holder With Filter Box

C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab This was removed fro (more)m a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.  Both pump speeds (High/Low) work correctly. Included are; TankModel: DGGE-2001Volts (DC/Hz): 250VDCMaximum Operating Limits: 250VDC/30W/70ºC Polyscience Model 71 Analog Immersion Recirculating Water Bath Heater PumpModel: 71Voltage: 240RangeHz/A: 50/4.30S/N: G15327Rev: B

Huber CC 415 Circulating Chiller Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included).

Maximum temperature: 150°C Temperature stability (at 37°C): ±0.005°C Temperature uniformity (at 37°C (more)): ±0.02°C Heater power: 2 kW Heat up time from 25°C to 70°C: 25 min Maximum pressure pump performance (at zero flow): 310 mbar Maximum flow pump performance (at zero pressure): 17 L/min Tank capacity: 12 L Tank dimensons (DxWxH): 325 x 300 x 150 mm Liquid depth (min/max): 80/140 mm

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Hermle Z366-06250 - 6 x 250ml Angle Rotor The Hermle Z366-06250 - 6 x 250ml Angle Rotor features a m (more)aximum speed of 8,000 RPM and a maximum RCF of 10,016 x g (maximum speed of 10,000 RPM and maximum RCF of 15,650 x g when in use with the Z36-HK Centrifuge). This rotor is designed for use with the Hermle Z366, Z446, Z496, and Z36-HK Series. INCLUDED: The Hermle Z366-06250 - 6 x 250ml Angle Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty