LAUDA Hydro H4 water bath

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

MORE DETAILS TO FOLLOW

'F' Series - B Medical Systems The 'F' PREMIUM series plasma freezers are instruments of the highest (more) quality and with state-of-the-art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F701 plasma freezer - Storage capacity (350ml plasma bags): 575 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times The whole line dedicated to the preservation of blood and derivatives: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A