Funke Gerber WB 436-D Water Bath

Working temperature range: 20 to 120°C Temperature stability: ±0.02K Pump pressure max: 0.4 bar Pump (more) flow max: 17 L/min Volume: 12 to 18 L Dimensions (WxDxH): 331 x 536 x 349 mm Bath opening (WxD): 300 x 365 mm Bath height: 150 mm Large LCD display for actual and set values, setting and display resolution of 0.1°C Easy input of set value for temperature and Vario pump via three function keys Automatic safety and warning function in case of low liquid level in the bath Overtemperature protection with automatic cut-out (safety class III, FL for operation with flammable liquids) Audible error alarm Malfunction indicator with automatic diagnosis Calibration and adjustment option Weight: 11 kg

Buchi R-210 Rotavapor Rotary Evaporator & Heidolph Heizbad WB Water Bath This was removed from  (more)a university lab where it was surplus to requirements. The system powers up and the motor and the water bath are in full working order. It is in reasonable cosmetic condition with marks and stains. Included are; 1 x Buchi RotavaporType - R-210SN - 0700006764Adjustable height from 47 to 57cm 1 x Heidolph Water BathType - Heizbad WBSN - 029902413

Huber CC 415 Circulating Chiller Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included).

Yamato BM-100 Analog Water Bath 4L, 115V Water Tank Capacity 4L Operating Temperature Range Ambien (more)t +5-95°C Temperature Accuracy ±2°C (at 60°C) Features - Analog set up system - Thermometer is included to verify actual temperature - Protected water tank prevents burns caused by contact - CSUS316 pipe heater 500W - Comes with 1 Year Manufacturer's Warranty

Boekel 14458 Round Water Bath The Boekel 14458 Round Water Bath is manufactured from brushed stainle (more)ss steel for corrosion resistance. This bath is to be used with a heater. The Boekel 14458 Round Water Bath is supplied with 7 concentric rings for configurability and has a diameter of 20 cm (8"), and depth of 7 cm (2-3/4"). INCLUDED: The Boekel 14458 Round Water Bath includes: - 7 Concentric Rings - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato LR-500BA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V Speed Range  (more) 100 to 1000 rpm Max Torque 0.98N•m (10kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 100~1000 rpm for medium viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load. Set includes stand, rod, stainless steel shaft and 75mm 4-blade propeller. INCLUDED: The Yamato LR-500BA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V includes: - Stirring shaft (ø10*500mm) - 75mm 4-blade propeller - clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Flat polygonal sheets - set (1 mg - 500 mg) E2-class mass standards represent an exceptional standar (more)d of precision in mass measurement. Classed as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class mass standards - key features High precision measurements - Class E2 mass standards must meet stringent measurement precision standards. The permissible deviations from the actual mass are strict, making this class of standards the ideal solution for applications requiring extreme accuracy. Stability over Time - An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control - Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications - E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. The set includes: wooden box 12 mass standards 1 pair of tweezers 1 brush Material: nickel silver *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Zastosowanie 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 100 g), plastic box Number of  (more)pieces in the set: 21 Weights 1 g i 2 g – solid masses without adjusting chamber

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Ohaus ISHD23HDG Incubating Heavy Duty Orbital ShakerIncubating Heavy Duty Orbital Shakers offer exce (more)ptional temperature uniformity and are designed for a variety of shaking and incubating applications. The exclusive Opti-Flow Forced Ventilation System utilizes twin induction or a single large fan. Air is deflected around & not directly on samples, creating a circular flow of air ensuring uniformity. For repeatable results, the exclusive Accu-Drive shaking system ensures speed accuracy. The Triple Eccentric Drive provides consistent shaking motion throughout the entire speed range. The chambers for the ISHD23HDG and ISHD23CDG units are large enough to hold 2 x 6 L Erlenmeyer flasks with optional clamps and platform. INCLUDED: The Ohaus ISHD23HDG Incubating Heavy Duty Orbital Shaker includes: - Non-skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISHD23HDG Incubating Heavy Duty Orbital Shaker Specifications MotionOrbital, 25 mmCapacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpmTemperature RangeAmbient +5°C – 65°CUniformity± 0.5°C at 37°CSpeed Range15 rpm – 500 rpmTray Size (LxW)18 in x 18 in (457 mm x 457 mm)CalibrationTemperature calibrationCommunicationRS232 ControlDigital Dimensions23.5 in x 32.1 in x 26.6 in (596 mm x 815 mm x 675 mm) (HxLxW)Drive System Triple Eccentric; Brushless DC Motor Inner Dimensions (HxHxLxLxWxW)17 in x 432 mm x 20.6 in x 523 mm x 24.8 in x 629 mmNet Weight224.07 lb (101.6 kg)Power120V, 8A, 50/60HzPower Consumption800 WSafety CertificationTUVSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm /- 1 rpmSpeed Range15 rpm – 500 rpmTimer1 second – 160 hoursTray ConstructionAluminumWorking Environment59°F – 90°F, 80%RH, non-condensing (15°C – 32°C, 80%RH, non-condensing)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Eppendorf F-45-18-17 Fixed Angle Cryo Rotor with Lid Eppendorf F-45-18-17 Fixed Angle Cryo Rotor wit (more)h Lid, never used, new in box. Cat. # 022654161. This rotor accommodates 18 x 1-2ml cryo tubes. The Eppendorf F-45-18-17 Fixed Angle Cryo Rotor is for use in the Eppendorf 5430 and 5430R Centrifuges. INCLUDED: The Eppendorf F-45-18-17 Cryo Fixed Angle Rotor with Lid includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-45-18-17 Fixed Angle Cryo Rotor SpecificationsMax Speed8,900 RPMMax RCF8,324 x gCapacity18 x 1.0/2.0 CryoTubes