LAUDA Hydro H 2 P histological water bath

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the water bath is used to maintain constant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

The system includes: pt100 probe (code A00000268), rod (code A00001069) and clamp (code A00000280);  (more)magnetic stir bar Ø8x40 mm (code A00000356). Magnetic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7 is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW