LAUDA Hydro H 6 V ring water bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the bain-marie is used to maintain costant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V Speed Range 5 to 3 (more)15 RPM Evaporation Capacity Up to 23 ml/min Rotation Modes Forward/Reverse/Auto Inversion Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with a slide jack mechanism for convenient height adjustment. Set includes the BM302-A Water Bath and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V includes: - Glassware Set Selected Above - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato CF-802A Cooling Water Circulator 16L, 115V Cooling Capacity 1320W at 10°C Operating Tempera (more)ture Range -20°C to 30°C Temperature Accuracy ±1.0°C Features - User-friendly controller: Controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature. - Easy drainage of condensate water: A condensation drain port is designed near the connector on the upper rear of the unit - Easy to clean intake filter: Filter mounting plate located on the front of the unit can be easily removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap: Used to recover solvent gases remaining in the concentration recovery process - Includes 1 Year Manufacturer's Warranty

Polyscience WBE10A11B 10L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the  (more)Polyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE10A11B 10L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE10A11B 10L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Manufacturer's Documentation - Power Cord - Operator's Guide - Full 2 Year Manufacturer's Warranty

Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C t (more)o 100°C Heating Capacity 1000W Volume 5L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Dionex IC25 Ion Chromatograph This was removed from a university lab where it was surplus to require (more)ments. The unit has been professionally serviced and is in good working order. It is in good cosmetic condition with minor marks from use.

Julabo FD200 Immersion Cooler, 115V/60Hz Working Temperature Range -10°C to 30°C Refrigerant R134a  (more)Fluid Type Water, Silicone Features - For applications near ambient temperatures - Integrated freezing protection - Preventing the use of precious tap water for cooling - Compact design, small footprint - Ease of operation - Low energy requirement JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FD200 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards NEXT 300T HC ISO100 160W Turbomolecular Pump Ultimate Vacuum <6x10-8 Inlet Connection DN1 (more)00ISO-K Displacement 25.0 m3h-1 / 14.7 ft3min-1 Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers. INCLUDED: The Edwards NEXT 300T HC ISO100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty