LAUDA Hydro H 19 V ring water bath

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator Working temperature Room Temp. to 100°C Capacit (more)y 18 L Temperature Stability DIN 12876 ±0.05 K Features - High-quality compact immersion circulator for efficient operation - PID temperature control for precise and reliable performance - LED displays for both working and safety temperature readings - Optical and acoustic warning functions for added safety - Adjustable safety circuit for secure temperature control - Sub-level protection ensures dependable operation - Lightweight design with compact dimensions for easy storage - Ready-to-connect packages simplify setup and use The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator is a high-quality, compact solution for achieving precise temperature control in laboratory environments. With advanced PID temperature control, it delivers stability to ±0.05 K, ensuring reliable performance across a working range from room temperature to 100°C. The dual LED displays provide clear and convenient monitoring of both working and safety temperatures, while integrated optical and acoustic warnings enhance operational safety. The adjustable safety circuit, with a range up to 110°C, and sub-level protection ensure secure and dependable operation. Designed for efficiency and ease of use, the ICC 100 Lite Eco is compatible with 18 L baths, making it suitable for a wide range of laboratory applications. Its lightweight and compact design, with dimensions of 5.3 x 11.9 x 7.1 inches and a weight of 9.3 pounds, allows for easy integration into any setup. Built to comply with DIN 12876 standards, this circulator combines precision, safety, and reliability, making it a valuable addition to any laboratory workflow. INCLUDED: The IKA ICC 100 Lite Eco 18 Open Bath Heating Circulator includes: - ICC 100 lite Compact Immersion Circulator - IB 18 eco Plastic Bath - BL.ICC Large Bridge - Screwdriver for Safety Circuit - Power Cord - Operators Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

Grant JB Aqua 18 Plus Water Bath Lab This item was removed from a university where it was surplus to (more) requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition, however the handle has snapped off, this does not affect its functionality.

Lauda Eco Gold with Lauda Eco RE 420 Refrigerated Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Lauda Eco Gold with Lauda Eco RE 620 Water Bath This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in full working order. (Thermometer not included). It is in excellent cosmetic condition with minor marks.

Vacuum systems are widely used for the aspiration and disposal of liquid waste, for instance, when r (more)emoving media from cell cultures, supernatant after centrifugation, and wash solutions from immunoassay well plates. The aspiration of waste liquids is a routine yet time-consuming task. The user-friendly VACUSAFE system streamlines this repetitive workflow, freeing up lab personnel to perform other vital tasks. It also provides a secure alternative to do-it-yourself liquid waste disposal systems typically found in laboratories, protecting operators from exposure to liquids and aerosols for a safer working environment. The system additionally features optional liquid level detection to prevent overfilling, and a filter to protect the vacuum source from contamination. Vacuum range: -300 to -600 mbar (adjustable) Pump flow rate: 8 l/min (air) Liquid aspiration rate: 17 ml/s (aspiration pipet) Noise emission: <50 dB(A) at 1 m Dimensions (HxWxD): 530 x 180 x 320 mm Weight: 3.4 kg

Capacity: 96 x 0.2 mL Max temperature: 100°C

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up, but the display screen is faulty, therefore we were unable to test further. It is in reasonably good cosmetic condition, with marks from use. It is listed as Spares/Repairs. Includes the following: SIGMA 11133 Swinging Bucket Rotor w / 2 x BucketsBucket capacity: 4 x 550 ml

Crest P500D/HF-132 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transd (more)ucer technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P500D/HF-132 Digital Ultrasonic Cleaner with Power Control combines advanced technology with user-friendly features, making it an essential tool for precision cleaning applications. Featuring ceramically enhanced transducer technology and homogenous sound field distribution, it operates at a frequency of 45 kHz, ensuring thorough cleaning and enhanced sample preparation capabilities. With adjustable cleaning time and bath temperature ranging from 20°C to 80°C, it offers versatility for various cleaning needs. The "D" models include nine-step ultrasonic power adjustment and a Degas function, optimizing cleaning performance. Its deep-drawn stainless steel tank with rounded corners facilitates easy cleaning, while an intrinsically safe heater with dry-run protection ensures safe operation. Ideal for removing flux from PCBs, oils, paints, and other contaminants, the Crest P500D/HF-132 guarantees reliable performance backed by a 2-year manufacturer's warranty.INCLUDED: The Crest P500D/HF-132 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty