Bain-marie LAUDA Hydro H41

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Julabo PURA 10 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1200W V (more)olume 9.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 10 Water Bath, 115V/60Hz (NRTL Certified) includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato CF-802A Cooling Water Circulator 16L, 115V Cooling Capacity 1320W at 10°C Operating Tempera (more)ture Range -20°C to 30°C Temperature Accuracy ±1.0°C Features - User-friendly controller: Controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature. - Easy drainage of condensate water: A condensation drain port is designed near the connector on the upper rear of the unit - Easy to clean intake filter: Filter mounting plate located on the front of the unit can be easily removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap: Used to recover solvent gases remaining in the concentration recovery process - Includes 1 Year Manufacturer's Warranty

Refrigeration bath KB 18-40 FRYKA Main features: - Refrigeration unit: silent, fully hermetic, seale (more)d, air cooled, low maintenance - Parts of the casing made of stainless steel - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

Capacity: 17 L Max temperature: 100°C Max flow rate: 17 L/min Max pump pressure: 300 mbar Dimensions (more) (DxWxH): 457 x 381 x 456 mm Weight: 13.7 kg

This Vankel VK7010 Dissolution System VK750D Heater/Circulator was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). We are unable to test it further at our facility. The lab confirmed the unit was in good working order prior to removal. It is in good cosmetic condition, with minor marks from previous use. Printer paper not included. Includes 2 x Cable cables and 2 x Data cables.

This ELE Paqualab 25 Portable Incubator with Accessories was removed from a university lab where it  (more)was surplus to requirements. The ELE Paqualab 25 includes a universal incubator with 2 pre-set temperatures (normally 37°C and 44°C), a membrane filtration kit, connecting cables and operating manual. All components are housed in a convenient rigid carrying case which can also accommodate a number of electronic meters from the ELE Paqualab range. The unit is in good cosmetic condition with some light marks from use. It is housed in a travel case along with the accessories. The case is in good cosmetic condition. The unit powers up and seems to be in working order. There is a rocker switch on the unit that can be set to 37ºC and 44ºC it was tested with a digital thermometer (not included).Set at 37ºC our thermometer read 37.2˚CSet at 44ºC our thermometer read 44.1˚C Accessories:25x pairs of Aluminium Petri Dishes1x sample stand1x dual Crocodile clip lead (red/black)2x plastic bottles of Gelman Filtration products (Filters) 1x plastic bottle of m-Lauryl Sulphate Broth 1x 38.1g Batch No. 2243181x Gelman performance and spec sheet1x Gleman plastic widget 1x open box of Gelman GN-6 Grid 47mm sterilised membranes(box contents not counted)  1x 300ml Aluminium vessel (gold in colour)1x 200ml Aluminium vessel (silver in colour)1x Aluminium Cartridge1x sealed 50ml tube of Multipurpose Grease 556-4461x sealed bag Magnifying Glass7017A0001 1x 110mm cover slip forceps L325/011x 12v plug adaptor4x 60ml empty plastic bottles w/ lids

Hermle 2 x microplate swing out rotor for Z287-A The Hermle 2 x microplate swing out rotor for Z287- (more)A is an essential piece of equipment for laboratories conducting experiments with microplates. This rotor can spin microplates at a maximum speed of 3,800 rpm, generating an RCF-value of 1,453 xg. With a maximum radius of 9.0 cm, it provides ample centrifugal force to ensure efficient separation of samples in a relatively short amount of time. The rotor is equipped with an efficient acceleration and deceleration system, with acceleration taking 27 seconds and deceleration taking 29 seconds. This system ensures that samples are not damaged during the spinning process and that they are collected safely at the end of the experiment. The maximum loading weight for the rotor is 100g, with a loading height of 20mm, making it suitable for use with microplates of different sizes. Overall, the Hermle 2 x microplate swing out rotor for Z287-A is a valuable addition to any laboratory conducting experiments with microplates. It is an efficient and reliable piece of equipment, capable of generating enough centrifugal force to separate samples quickly and effectively. Its efficient acceleration and deceleration system, coupled with a high maximum speed and RCF-value, make it a top choice for laboratories looking to maximize the efficiency of their experiments. INCLUDED: The Hermle 2 x microplate swing out rotor for Z287-A includes: - Operator's Manual - Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.