Aurora Scientific Water Bath

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. The 'A' models (Agitation: H 8 A; H 16 A) have a magnetic stir bar liquid circulation system as standard, to improve temperature uniformity. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Water circulation The circulation system guarantees optimal temperature distribution throughout the tub. It is managed by a magnetic electric motor which transmits the rotation to a PTFE-coated stirrer in the tank. The agitator draws the water towards the center and then distributes it to the rest of the tank. The water circulation is activated via the main switch. Recommended accessories - Water level regulator. The water regulator located on the back of the bain-marie is used to maintain costant the set water level during water loss due to evaporation. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Technical features Flow rate (max.) 6 l / min Final vacuum (max.) 100 mbar (abs.) Pressure (max.) 2. (more)4 bar (rel.) Permissible fluid temperature 5-40 ° C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Ecological Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door