LAUDA Hydro H 9 V ring water bath

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Julabo SE High Tech Heating Circulator Water Bath This was removed from a university lab where it wa (more)s surplus to requirements. The unit is in good working order but is missing the plug for the drain, which will need to be replaced before it can be used. We rerouted the water with a hose for testing. It is in good cosmetic condition with minor marks.

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

B5 Haake F6 Circulating Water Bath F6 Laboratory Chiller Brand: HAAKE Voltage: 230V, 50Hz Current: 9 (more)A Power: 2100 VA Thermostat temperature range: -60 to 250ºC Water bath content: 4.5 L External dimensions (W) x (D) x (H): 21 x 37 x 37.5 cm Internal dimensions (W) x (D) x (H): 14 x 15 x 15 cm

BIOBLOCK SCIENTIFIC Polystat 34 immersion circulator without tank Microprocessor Reference POLYSTAT  (more)95304260565 1700 watts

Julabo CORIO C-BT19 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C (more) to 100°C Heating Capacity 1000W Volume 19L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-BT19 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VWR LAB DISC magnetic stirrer Ultra-flat and compact magnetic stirrer with no moving parts. Reverses (more) the direction of rotation every 30 s to ensure optimal mixing. Direction of rotation reversible adjustable Wear-free training Plate and housing made of chemical resistant materials Non-slip and stable Model: Lab Disc Speed range: 15 - 1500 min⁻¹ Max mixing capacity H₂O: 800 ml Plate material: polyester Plate, LxW: Ø 100 mm Weight: 0.3 kg Input/output power: 5/3 W W×D×H: 117×180×12 mm

Circulation chillers for reliable continuous operation in laboratory and research applications from  (more)-10 to 40°C The LAUDA Microcool line, simple, easy to use, consists of four compact models with large LED display and membrane keyboard, which offer cooling capacities from 0.25 to 1.2 kW. The strong point of these devices is the high-quality centrifugal pump with magnetic coupling - unique on the market for this price category: the magnetic coupling of the pump and the electric motor prevents any kind of sealing problem on the pump shaft. The MC 250 and MC 350 models easily fit on a laboratory bench. Larger models MC 600 and MC 1200 with 600 and 1200 watts of cooling capacity are also available, which can be placed on the floor or under a laboratory bench to save space. In addition, the MC 1200 W, the most powerful device, is also available in a water-cooled version. Notable features - Auto start timer and auto power off function - Top filling opening, drain connection on the back - Cooling capacity adapted via solenoid valve control, including automatic compressor control Examples of specific applications - Rotary evaporators - Distillation systems - Spectrometers - Supply of cooling traps - Digital print - Laser cut - Spot welding - Injection molding - Tunnel drilling machines - Centralized cooling water supply Accessories included Nozzles for pump connections; screw cap Performance graph of the pump of the LAUDA Microcool CHILLER. Simple three button control panel, with display and three LED indications: heat transfer liquid required; active cooling unit; device error. Connections on the back of the Microcool: RS232; drain screw; external alarm output. Connections on the back of the Microcools: inlet/outlet pump connection; overflow connection. Front liquid level indicator. Front cover for filling. Front panel of the Microcool LAUDA easily removable for fast filter maintenance. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Level indication 3 - Operating unit 4 - Pressure gage 5 - Front panel with ventilation openings 6 - Four casters with locking brake 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Overflow connection 5 - Rating label 6 - RS 232 interface 7 - Alarm output 8 - Power supply 9 - Drain screw 10 - Ventilation openings 1 - Display 2 - LEDs 3 - Control buttons 4 - Main switch Liquid level indicator a - Max. level b - Min. level Pressure gauge The models with bypass (MC600 and MC1200) are equipped with a pressure gauge to read the set pressure.

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Edwards E1M18 Vacuum Pump Ultimate Vacuum < 3x10-2mbar Inlet Connection NW25 Displacement 25.0 m3 (more)h-1 / 14.7 ft3min-1 Features - High ultimate vacuum and rapid pumping speed ensure efficient operation across a wide range of laboratory and industrial applications - Quiet operation provides a comfortable working environment, reducing noise in sensitive areas - Features a pressurized oil system that lubricates pump shaft bearings and rotor sealing faces for reliable performance - Maintenance is simplified with an oil sight-glass for easy monitoring of oil levels and conditions at a glance - Facilitates easy oil changes with an oil drain plug that allows either gravity or pressure oil drainage for convenience - Compact, freestanding design allows flexible use without the need for additional support structures - Ideal for use with analytical instruments, leak detectors, helium research, and for backing turbomolecular pumps, showcasing its versatility Edwards E1M18 Vacuum Pump The EM range of oil sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) air cooled motor. Each EM pump is supplied with 2 x 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately. This is a single stage oil sealed rotary vane pump which has a pressurised oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior after the pump stops. The pumping chambers are air-tight, so this arrangement also prevents suckback unless the gas ballast valve is open.You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has an oil drain-plug to allow either gravity oil drain or pressure oil drain.Click Here to View Product Video INCLUDED: The Edwards E1M18 Vacuum Pump includes: - 2 Liters of Ultragrade 19 Oil - O ring and centering ring - Two Allen keys and spares seal for oil drain and filter plugs - Operator's Manual - 1 Year Manufacturer's Warranty

Excluding connection gas kit (see pictures for kit)