LAUDA Hydro H8A water bath

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. (Digital thermometer used for testing and is not included). It is in good cosmetic condition with minor marks.

Julabo PURA 4 Water Bath, 115V/60Hz Working Temperature Range 18°C to 99°C Heating Capacity 500W Vo (more)lume 4.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Space-saving model for use with one test tube rack The Julabo PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C (with bath cover). The working temperature range of +18°C to 99.9°C (with counter-cooling/bath cover) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 4 Water Bath, 115V/60Hz includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V Speed Range 5 to 3 (more)15 RPM Evaporation Capacity Up to 23 ml/min Rotation Modes Forward/Reverse/Auto Inversion Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with a slide jack mechanism for convenient height adjustment. Set includes the BM302-A Water Bath and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V includes: - Glassware Set Selected Above - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Temperature range: ambient +5ºC to 99ºC Temperature display and setting resolution: 0.1ºC Temperatur (more)e stability: ±0.2ºC Capacity: 26 L Unique Set and Forget technology – fast heat-up, accurate temperature control Simple, intuitive controls – quick and easy to set temperature Suitable for use with heat transfer beads Adjustable over temperature alarm – protect samples from over heating Practical front panel lock – disables front panel controls preventing unintentional changes Drain tap included

14 x Boxes Thermo Scientific Rack Side Access 1950520 Freezer Racking Code - 1950520Dimensions - W5. (more)5" x H10.9" x D26.5" 13 Boxes are sealed, one has been opened. The units are new and unused.

10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights These were removed f (more)rom a university lab where they were surplus to requirements. Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks. Includes: 10 x  Ohaus 200g weights10 x power supplies4 x manuals These scales also have the option to be operated with AA batteries Max 300gModel number- TA301

Perkin Elmer Universal Crimper Press Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and in good mechanical order.

This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and i (more)s ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.

Scilogex 50mL BlockThe Scilogex Block has the capacity to accommodate 8 x 50mL tubes. Each hole has  (more)a diameter of 29mm and overall dimensions are 15 x 9.5 x 5cm. INCLUDED: The Scilogex 50mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hoefer SUB13 Midi Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 12.8 x 15 cm Maximum Pow (more)er Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 900 ml Features - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Buffer recirculation ports—may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation - Colored loading strips—for easy well detection when loading - Compact tank—reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time - UV-transparent running tray— allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB13 Midi Submarine Gel Electrophoresis Unit is a versatile solution for both analytical and preparative nucleic acid studies. Designed to handle up to 112 samples per run, this unit provides efficient throughput with a removable gel-casting tray that allows gels to be cast directly within the tank, creating a secure, leak-proof setup with end gaskets. With buffer recirculation ports that can connect to a peristaltic pump, the SUB13 ensures stable buffer pH and prevents ionic gradient formation, enhancing the reliability of each run. Its UV-transparent running tray enables safe gel imaging without handling, while color-coded, height-adjustable combs allow for quick comb thickness identification and precise control over well depth. The compact tank design reduces buffer volume requirements, offering better control over voltage gradient and run times. Side handles make it easy to transport the SUB13 around the lab, making it a practical and user-friendly choice for high-quality nucleic acid electrophoresis. INCLUDED: The Hoefer SUB13 Midi Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Silicone Gasket* - 1 mm thick, 16-well combs, 2 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty