LAUDA Hydro H22 water bath

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This New Brunswick Scientific Innova 3100 Shaking Water Bath was removed from a university lab where (more) it was surplus to requirements. The unit has been fully tested by a service engineer. It is in full working order. It is in reasonably good cosmetic condition with some marks from use. Interior dimensions:L45cm x W35cm x D15cm

Lauda ECO RE 630 Water Bath with  ECO Silver Circulator This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

Grant SUB 36 thermostatic waterbath. Capacity 36 L. Ambient temperature range +5 °C to 99 °C. Stabil (more)ity of ± 0.1 °C and uniformity of ± 0.2 °C. Display resolution 1 ºC. Stainless steel tank and digital control. Over-temperature protection and automatic cut-off. External dimensions (LWH): 720*325*300 mm. User manual. *Note: the temperature probe shown does not belong to the equipment. The Grant SUB36 Thermostatic Bath is a 36-litre unit designed to maintain consistent, accurate temperatures in laboratories. Ideal for viscosity testing and thermometer calibration, it offers precise temperature control with an easy-to-use digital display. Its durable, corrosion-resistant construction ensures reliability, while its compact design makes it suitable for laboratories with limited space. Versatile and efficient, the Grant SUB36 ensures consistent, accurate performance in a variety of laboratory applications.

Julabo CORIO C-BT27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C (more) to 100°C Heating Capacity 1000W Volume 27L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-BT27 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Branson M3800H Mechanical Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wa (more)ves and creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, continous operation, as well as heating at 69°C/156.2°F Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features:Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change.Click Here to View Product Video INCLUDED: The Branson M3800H Mechanical Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty