Refrigeration bath KB 08-40 FRYKA

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Heidolph Laborota 4000 Rotary Evaporator & Heizbad Water Bath Lab Included are; 1 x Model - Labo (more)rota 4000Powers on with rotor speed running up to 270rpm 1 x Heizbad Water BathBath Dimensions - 24.5 x 24.5 x 13.5cmThe unit was tested with a thermometer.It powers on and the temperature was first set to 37˚c, which it reached quickly. The temperature was then set to its maximum setting of 100˚c and it reached after around 10 minutes. Glassware included:-Schott Duran 100ml Round bottom flaskBuchi NS 29.2/32 Round bottom flask100ml round bottom flaskQuickfit MF29/3/250Quickfit MF48/33/250 (Tube attached)Quickfit XA43 There is no condenser included.

Julabo ED with Julabo F25 Refrigerated Circulator Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Thermometer used for testing not included). It is in good cosmetic condition with minor marks from use.

Thermostatic bath with  circulation GFL 1012. Volume 7 L. Ambient temperature range +5 ° C to + 99.9 (more) ° C. Digital display Temperature adjustment by microprocessor with increments of 0.1 ° C. Short preheating. Security systems overheating and alarms. Stainless steel. Cover and rack. User manual.

Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the P (more)olyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE02A11B 2L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Manufacturer's Documentation - Power Cord - Operator's Guide - Full 2 Year Parts and Labor Warranty Polyscience WBE02A11B 2L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz SpecificationsKey SpecificationsDescriptionGen. Purpose Water Bath, Digital, 2 LDisplay3.25" LCDWorking Temperature Range CAmbient +5° to 100°Temperature Stability C±0.1°Temperature Calibration Capability1-pointWorking Access (L x W x D) (cm)9.9 x 10.9 x 15.2Flammability Class (DIN 12876-1)I (NFL) 60 Hz OnlyPart NumberWBE02A11BIncluded HardwareSample TrayHeater Wattage120Electrical Requirements (VAC/Hz/Ph/A)120/60/1/1.1Regulatory ApprovalsETL Comparison of ModelsSpecificationWBE02A11B 2LWBE05A11B 5LWBE10A11B 10LWBE20A11B 20LWBE28A11B 28LDescriptionGen. Purpose Water Bath, Digital, 2 LGen. Purpose Water Bath, Digital, 5 LGen. Purpose Water Bath, Digital, 10 LGen. Purpose Water Bath, Digital, 20 LGen. Purpose Water Bath, Digital, 28 LDisplay3.25" LCD3.25" LCDFull-color TFTFull-color TFTFull-color TFTWorking Temperature Range (°C)Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Ambient +5° to 100°Temperature Stability (°C)±0.1°±0.1°±0.1°±0.1°±0.1°Temperature Calibration Capability1-point1-point1-point1-point1-pointWorking Access (L x W x D) (cm)9.9 x 10.9 x 15.212.7 x 27.4 x 15.226.9 x 29.5 x 15.224.1 x 43.2 x 15.224.1 x 43.2 x 15.2Flammability Class (DIN 12876-1)I (NFL)I (NFL)I (NFL)I (NFL)I (NFL).comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Boekel Scientific 290300 Hot Tub - Water Bath, 28L w/polycarb lid 115VThe Boekel Scientific290300 Ho (more)t Tub - Water Bath, 28L w/polycarb lid can be used as a standard waterbath or as a boiling water bath. User simply sets temperature into “boilingmode”. The unit has digitally controlled temperature with a built-inprogrammable timer. The temperature control is extremely accurate due to athree point factory calibration set in 0.1°C increments up to 100.0°C andPID controller. The Boekel Scientific 290300 Hot Tub - Water Bath, 28L featuresa large digital display, a seamless, passivated stainless steel tank, andheating indicator LED.Applications General purpose water baths offer excellent performance and are ideal for general lab applications. The special "boiling mode" is a convenient feature for melting agar and other applications requiring boiling temperature. INCLUDED: The Boekel Scientific 290300 Hot Tub - Water Bath, 28L w/polycarb lid 115V includes: - Polycarbonate Lid - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

A homogenizer is a laboratory or industrial instrument used for the homogenization of various types  (more)of materials, such as fabrics, plants, food, soil and many others. The OV 625 Digital laboratory disperser guarantees the highest level of reproducibility for a wide range of laboratory applications. Cutting-edge technology and engineering, like all Velp scientific products, guarantee precision and high shear force for rapid homogenization, emulsification, suspensions and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products. Excellent mechanical properties and high chemical resistance make it suitable for even the most demanding laboratory challenges. DISPLAY AND CONTROL Bright, intuitive LED display and rotary knobs allow you to fine-tune the speed between 3,000 and 25,000 rpm. Clear speed information on a black background aids visibility in all conditions. SAFE AND RESISTANT Safety features ensure maximum operator protection. For example, once the set point speed has been set, the OV 625 Digital will reach it gradually. In addition, various alarms warn the user in case of overload and overtemperature. The resistant and hermetic structure allows correct operation even in the most difficult conditions. Warranty up to 3 years. For maximum comfort, choose the model with the double pole stand. CHOOSE THE SUITABLE ACCESSORY Choosing the right dispersing tool is essential to achieve maximum performance and high reproducibility. VELP dispersion tools are made of stainless steel (316L) and equipped with a PTFE seal, to be compatible with different types of samples and reagents. To handle different fluids, different dispersion tools are required. In some applications it is necessary to use two dispersing tools in order to achieve a final fineness level from coarse to fine. Thanks to a knob and a quick fastening system, inserting and changing the dispersion tool is simple and fast: in seconds you can switch from one application to the next. FOCUS ON THE PRODUCT What is a disperser? The disperser can be called in several different ways: homogenizer; Cell Lysor, High Shear Mixer, Polytron, Stator Rotor Homogenizer, Sonicizer or Tissue Tear. The various nomenclatures are due to the various uses of this tool and you have different results that can be obtained through the accessories. Essentially, a disperser is used to create a uniform mixture by forcing the sample through a narrow, confined space. Blade homogenizers, such as Velp's OV 625 Digital, use the blades as a rotor for dispersing. How does it work? The dispersing tool consists of a rotor rotating at high speed inside a stationary stator. The area between the rotor tip and the stator slot is called the shear gap. Thanks to the high circumferential velocity, the fluid is drawn axially into the dispersion head and forced radially through the cutting gap, breaking up the particles.

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

The professional weighing workstation is intended for microbalances and analytical balances. It is e (more)quipped with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the top of stone, and the working part of MDF.

Scientific Industries ABI Digital Vortex-Genie 2 Specially configured for Applied Biosystems Micropl (more)ate protocols ONLY. Supplied with attachment for ABS Microplates. Accepts all Vortex-Genie 2 attachments.Scientific Industries ABI Digital Vortex-Genie 2 Specifications Speed (RPM) 500-3000 (2850 for 50Hz models) Timer 1-99 seconds, 1-99 minutes or continuous Product Weight 4 Kg (8.8 lb) Dimensions (base) 165 x 122 x 165mm (6.5 x 4.8 x 6.5in) Warranty 24 months Markings ETL listed / CE

Ohaus i-D33XW150C1X5 AM Defender 3000 Washdown Bench Scale, 300 lb., 0.05 lb. Maximum Capacity 300 l (more)b (150 kg) Readability 0.05 lb (20 g) Platform Size 25.6 in x 19.7 in (650 mm x 500 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord or rechargeable battery - Standard RS232 and optional USB device or ethernet - 304-grade stainless steel platform and frame, stainless steel IP66 indicator, IP67 load cell, non-slip adjustable rubber feet - 150% overload protection - 2 Year Manufacturer's Warranty