Industrial refrigeration equipment

Refrigeration bath KB 08-40 FRYKA Main features: - Refrigeration unit: silent, fully hermetic, seale (more)d, air cooled, low maintenance - Parts of the casing made of stainless steel - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

MBO Mobile Air ConditionerModel: MA88001 KY-20 This item was removed from a university where it was  (more)surplus to requirement. The unit powers on and is in working order, with the air flow functioning as expected. It has a temperature range of 16˚C - 30˚C. The item is in reasonable, used cosmetic condition.

Pitco 35C+ 16 Ltr Tube Fired Gas Commercial Deep Fat Fryer This was removed from a university cateri (more)ng department. It was surplus to requirements. The unit has not been tested as we do not have a gas supply at our facility. It is in reasonably poor cosmetic condition and is in need of a deep clean, and some maintenance.

This Hoshizaki Laboratory Ice Maker Machine  Model - FM-120DE was removed from a university lab (more) where it was surplus to requirements. The item powers on but we were unable to test it further. The item is in reasonable cosmetic condition, the top is a bit loose and dented at the front. As this was removed from a laboratory environment it is not suitable for commercial catering and can only be used in a lab again. Unit size - D60 W60 H71cmWeight - 69kg Comes on a stand with wheelsStand size - D61 W64 H67cm

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault. Therefore, it is listed as Spares/Repair.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)holds mains water pressure but has an issue with evaporation temperature being high, and/or and issue with auger rotation. It likely requires an NTC sensor. It is sold for spares/repairs

Miele Professional Dishwasher  GG05 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested.  The inlet pressure is sufficient, the filter has been checked, cleaned and the propeller adjusted but shows an error  404 message which indicates there is an inlet issue. It is sold for spares/repairs as it needs a new inlet.

ARMAGARD Industrial Computer Workstation This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition and powers up, we are unable to test further at our facility.

Konrad Modrach Gera Metal Bending Tool with Dexion Guillotine This was removed from a university wo (more)rkshop where it was surplus to requirements. The unit is in reasonably good cosmetic condition but has not been tested

This listing is for a Sctotsman AF 80 AS Ice maker.The unit is in full working condition and is read (more)y for immediate release.Supplied with water pipe.The Scotsman AF 80 AS Ice Maker is a high-performance, self-contained flake ice machine that excels in producing ice for various applications, ranging from food service to medical and scientific uses. Here’s a detailed overview of its features and benefits:Key Features:Compact and Stylish Design: Constructed from stainless steel, the AF 80 AS not only looks professional but also ensures durability and easy cleaning, making it ideal for environments like restaurants or laboratories where aesthetics matter.Electronically Controlled Operation: The machine's electronic control system includes self-diagnostic functions, allowing users to quickly identify any issues, minimizing downtime and enhancing reliability.Integral Storage Bin: The built-in storage bin can hold up to 25 kg of flake ice, ensuring that you have a ready supply of ice when needed.Production Capacity: Daily Output: With a capability of producing up to 70 kg of flake ice daily, the AF 80 AS is well-suited for high-demand settings. For instance, a busy seafood restaurant could utilize the flake ice to keep seafood fresh and appealing for customers.Sanitation System: XSafe Sanitation System: This advanced feature effectively destroys 99% of all known bacteria and viruses, ensuring that the ice produced is not only plentiful but also safe for consumption. This is particularly crucial in medical settings where cleanliness is paramount.Maintenance and Installation: User-Friendly Maintenance: With front panel access, routine maintenance becomes straightforward, allowing for easier cleaning and checks without the need for extensive disassembly.

This listing is for a AirFlow Instrumentation LCA6000RVT Airflow Anemeter.The unit is in full workin (more)g condition and is ready for immediate release.The AirFlow Instrumentation LCA6000RVT is a high-performance airflow anemometer designed for accurate airflow measurements in various applications, including HVAC systems, industrial environments, and laboratory settings. This device combines advanced technology with user-friendly features to provide reliable data for ventilation and airflow assessment.Key Features:High Accuracy: Offers precise airflow measurements across a wide range, ensuring reliability in various applications.Digital Display: Features a clear digital display for easy reading of airflow data, enhancing user experience and operational efficiency.Multiple Measurement Units: Capable of measuring airflow in various units (e.g., m³/hr, l/sec, cfm), allowing flexibility for different user preferences and standards.Data Logging Capability: Equipped with data logging functionality, enabling users to record and analyze airflow measurements over time.Durable Construction: Built with high-quality materials designed to withstand rugged use in industrial and field environments.User-Friendly Interface: Intuitive controls and interface for easy navigation and operation, reducing the learning curve for new users.Battery-Powered: Portable design powered by batteries, making it convenient for on-site measurements without needing external power sources.Compact and Lightweight: Designed for easy handling and transport, making it suitable for fieldwork and various measurement locations.Specifications:Measurement Range: Covers a broad range of airflow velocities, accommodating different application needs.Operating Conditions: Suitable for use in various environments, including both indoor and outdoor settings.Calibration: Pre-calibrated for accuracy, with options for recalibration to maintain performance over time.

This was removed from a university where it was surplus to requirement. The unit powers up and is in (more) good working order. It is in reasonable cosmetic condition with marks from the sort of use you would expect a used machine like this to have. Model - W20.180SN - W201802221D

PSS / Ramada Warehouse Shelf Racking with Boards Included are the following; Uprights, which are all (more) 90cm deep. 586cmQty: 6 507cmQty: 5   389cmQty: 5 Beams 278.5cm lengthQty: 226 Boards 134x89.5cmQty: enough for all beam levels. We're happy to supply equal boards to beams (as 2 beams per level and 2 boards per level). Column guards and be included - 1 per upright We are happy to sell as a split purchase or full load Collection only from CF83 3HUWe can forklift load onto a suitable vehicle

Atlas Copco GA18 Compressor Lab This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab said it was functional prior to removal

Vehicle Details: Vehicle supplied with two keys. Service Record/Invoices Last three years. Mileage:  (more)423258 Km. MoT expiry date: 30:04:25. Two passenger seats fitted. Reverse camera fitted. Parking sensors fitted. Tachograph Calibration: 23.10.2023 (New unit fitted) Anteo Tail lift fitted. One isolation key supplied. Thorough Examination Tail lift: 08:01:25. Tail Lift Dimensions: W 230cm x L 180cm. Tail Lift Capacity: 1 ton. Internal Dimensions: L 620cm x W 240cm x H 210cm (Door opening)

4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans These were removed from a university lab (more) where they were surplus to requirements. All 4 Units power on and are powerful they are in Good Condition with Minimal Wear and just a few minor scratches here and there Model - EWRG 210 LB/4

NesLab CFT-75 Refrigerated Recirculator Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on. It is in good working order.

This Porkka Commercial Laboratory Ice Machine Model KF75 was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and the lab informed us that it had no known issues. We have tested it and it is in good working order. It is in good cosmetic condition with marks from use. Because it was removed from a laboratory environment this is sold strictly for lab use only.

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit had been newly installed in late 2023, so has not seen heavy use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

It allows the observation of samples without losing temperature.

Mobile retention tank DENIOS PolySafe FSR 6.2 made of polyethylene (PE) Retention trolley External d (more)imensions (W x D x H): 795 x 645 x 315 mm Collection (retention) volume: 60 litres Storage capacity: Small containers up to 60 litres Total load: 120 kg With metal grating On 4 castors

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

ITV IQ 85C flacked ice machine / flake. Ice production 88kg/24h. Capacity 20 kilos. Low energy consu (more)mption thanks to its high-efficiency evaporator without sealing joints or seals. Stainless steel spindle. IN-OUT front ventilation that allows built-in installation. Power indicator light, stop by safety element and full ice tank. Door steel inoxidable. STIF. Opening and cushioning patented by ITV. Electromechanical control system. Speeder. Clean button. EASI. 59x47x79 (DxWxH). 58 kilograms. Note: small defects on the front of the door that do not influence its operation. Visible in image 5 energy Features

MIL'S PS 12V vacuum pump. Single stage oil-free piston pump suitable for many types of applications  (more)in dry and wet environments. Compact design, with minimal maintenance and low acoustic level. Low energy consumption. They are recommended for applications where noise level is a priority. It has a pumping speed of 10 m3/hr and can reach a final vacuum of 80 mbar. The MIL'S PS 12V vacuum pump offers reliable and efficient performance for a variety of applications. With its compact and portable design, this pump is ideal for use in laboratories, refrigeration systems, and other environments where a precise and constant vacuum is required. With 12V power, this pump is easy to use and maintain, which makes it an excellent option for professionals.

Select Incubat reconditioned incubator. Volume 36 L. Ventilation by natural convection. Adjustable  (more)from ambient temperature +5 ºC up to 80 ºC. Regulation and digital reading of temperature and time of operation. Stability ± 0.1 ºC. Uniformity ± 0.5% to temperature of work. Error from setpoint ± 2 % at working temperature. Resolution 0.1 ºC. Interior door of tempered glass. It is supplied with two trays and four guides. They do not have RS232 output .Thermostat adjustable.

ULK 602 FRYKA circulation chiller Energy efficient: - fan with EC technology Low noise level: - part (more)icularly quiet components - the fan adjusts its speed to the required value Easy to use: - integrated funnel - self-sealing hose connector with quick coupling - drain cock High quality components: - touchscreen controller with high quality glass screen and integrated digital flow and fill level indicators - components from renowned German manufacturers - refrigeration unit: completely hermetically sealed, air cooled, low maintenance High operational reliability: - thermal overload protection - dry-running protection - optical and acoustic alarm - error messages are displayed in plain text Proven standard: - MOD bus interface Technical features: Operation from -10°C to +40°C Control accuracy +/- 0.5K Cooling capacity in watts at +20°C 650 Circulation pump: flow rate 10 l / min; flow pressure 0.6 bar External dimensions [LxWxH]: 31 x 41.5 x 58 cm Weight: 35 kg Electrical connection: 230 V / 50 Hz Coolant reservoir: 2.0 to 4.5 l