Refrigeration bath KB 08-40 FRYKA

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This was removed from a university lab where it was surplus to requirements. The water bath module i (more)s in working order, but we have not tested the air inlet at our facility. It is in good cosmetic condition with minor marks from use. PN - 103193/1

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Yamato CF-303Y Cooling Water Circulator 3.9L, 115V Operating Ambient Temp. Range 5 to 35°C Max. Flo (more)w Rate 10L/min. Refrigerant R452A Features - User-friendly controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature - Convenient circulation pathway connection is completed by inserting a hard tube with 10 mm OD or flexible hose with 9mm ID. Connector can be freely moved and be set in the desired direction - Easy drainage of condensate water via a drain port near the connector on the upper rear of the unit - Easy to clean intake filter located on the front of the unit can be removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap (option for CF802A) A powerful 3.9L closed circulation system with excellent cooling capacity designed to work with laboratory equipment such as rotary evaporators. Easy maintenance of air intake filter. Rotatable connector which can freely be moved and be set in the desired orientation. Convenient drainage of waste water. Compact and space-saving to fit on laboratory tables and limited space. Temp. range: -20°C ~ 30°C. INCLUDED: The Yamato CF-303Y Cooling Water Circulator 3.9L, 115V includes: - Condensation drain hose - Hose clamp (2) - Hose nozzle (for flexible hose connection(2) - spare fuse for service outlet 2A (1) for CF802A - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

HEIDOLPH Hei-VAP rotary evaporator bath. (517-61000-00-0).  Capacity 4.5 L. Temperature range: water (more) bath from 20°C to - 100°C, oil bath from 20°C to - 210°C The HEIDOLPH Hei-VAP rotary evaporator bath is an essential accessory for laboratory equipment. Designed specifically for the Hei-VAP rotary evaporator, this bath provides precise temperature control during the evaporation process. With a capacity of up to 4.5 liters, this bath is spacious enough to accommodate a variety of samples. In addition, it has an efficient heating system that allows you to quickly reach the desired temperature and maintain it constantly. Its robust and durable design ensures long life and reliable performance. In summary, the HEIDOLPH Hei-VAP rotary evaporator bath is an ideal choice for any laboratory requiring precise temperature control during evaporation.

Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C t (more)o 100°C Heating Capacity 1000W Volume 5L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen  (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

Ohaus EX2202 Explorer Toploading BalanceThe OHAUSEX2202 Explorer Precision Balance with 2200 gram we (more)ight capacity, has newlyoptimized linearity and repeatability specifications and enhanced vibrationfiltering for better balance stability. All Explorer models also come standardwith AutoCal automatic internal calibration. These combined enhancementsimprove accuracy, efficiency, and throughput.A large colortouch-screen display, icon-driven application software that features 14 uniqueapplication modes, and an adjustable angle display make the OHAUS Explorerseries the easiest to use, most advanced balance in its class today.The base andterminal of the Explorer EX2202 separate for maximum flexibility in any workarea. It also has four user-programmable touch free sensors to minimize crosscontamination and button wear. The EX2202 meet or exceed the Class I and II accuracyrequirements in accordance with the National Institute of Standards andTechnology (NIST) Handbook 2200g Capacity 0.01g Readability Platform: 190 x 200mm Large 5.7" full-color touchscreen display with intuitive set-up and application software AutoCal automatic internal calibration for optimized weighing performance 14 application modes, 11 weighing units and 5 display languages for a wide variety of applications 4 programmable touchless sensors for hands-free operation Modular display can be separated from the weighing base Click Here to View Product Video INCLUDED: The Ohaus EX2202 Explorer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark TC 9639 Thermal Cycler w/ Multi-Format Block Benchmark’s TC9639 Thermal Cycler provides co (more)nsistent, reliable results for laboratories with medium to high throughput. From its large, touch-screen user interface to its unique, multi-format block, this cycler is loaded with features. The program wizard and 10 preinstalled programs make it easier than ever to get up and running. A large, full color touch screen serves as the operations center where all functions are accessed. From the “Home” screen, simply touch an icon to view the last run program, enter the program library, or use the program wizard to quickly enter a protocol. In addition, icons for favorite programs can be added for faster access. The program wizard guides users through quickly setting up a protocol in a single screen. Once entered, programs are shown graphically, and can be edited by simply touching the step that requires modification. Time and temperature increments can be built into programs as well as slower ramp rates. Storage capabilities are unlimited; programs can be stored in public folders, private (password protected) folders or on a flash drive. The full virtual keyboard allows for alphanumeric naming of programs and folders. The fully adjustable heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35C, the lid automatically shuts off. Heating and cooling of the block are precisely and accurately controlled within exceptionally tight tolerances by a proprietary algorithm that simulates sample temperature. With the multi-format block, there is no need for the expense of multiple interchangeable blocks. The TC 9639 has the flexibility to accept 96 x 0.2ml tubes, a 96 well plate or 39 x 0.5ml tubes all in the same sample block. An in-situ adapter is available for use with slides. Additionally, the unit may be purchased with a 384 well sample block. INCLUDED: The Benchmark TC 9639 Thermal Cycler w/ Multi-Format Block includes: - Multi-Format Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty