ATEX socket STAHL 8570/12-305

This was removed from a university where it was surplus to requirement. The unit powers up and is in (more) good working order. It is in reasonable cosmetic condition with marks from the sort of use you would expect a used machine like this to have. Model - W20.180SN - W201802221D

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit had been newly installed in late 2023, so has not seen heavy use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

Miele Professional Dishwasher  GG05 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested.  The inlet pressure is sufficient, the filter has been checked, cleaned and the propeller adjusted but shows an error  404 message which indicates there is an inlet issue. It is sold for spares/repairs as it needs a new inlet.

Heli DW-86L58 upright ultra-low freezer. Temperature range from -40 ºC to -86 ºC. Capacity 58 L. Ult (more)ra-fast cooling to -80°C in less than 90 minutes. Thick foam insulation. Single compressor. Microcomputer control. Digital temperature display. Audible alarm functions. Password protection. Key lock. Double door. Stainless steel shelf and interior. Dimensions: exterior 640*665*1145 mm; interior 364*405*410 mm. User manual. The Heli DW-86L58 Ultra Low Temperature upright Freezer is a small but robust unit that combines a reliable cooling system together with a unique door sealing system (perfect fit system®).  As the -86°C freezer itself can be set accurately on the controller the most important temperature is products stability.  For this reason We only chooses the most reliable components available.  The reliable cooling compressors are used in a unique cascade system with very low compressor pressures and a completely sealed cooling system.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Life Technologies Ion Torrent OneTouch 2 & ES System This was removed from a university lab whe (more)re it was surplus to requirements. The system powers up and is in good cosmetic condition with minor marks. Included are; Ion Torrent OneTouch 2Ref. INS1005527SN - 2456280-0958 Ion Torrent OneTouch ESModel - 844 1-21SN - 402237

Pharmacia Biotech  XK 16/20 Chromatography Column This was removed from a working lab where it (more) was surplus to requirements. The unit is in good cosmetic condition but has been used.

Principle: Any positive and untouched isolation can be performed to separate target cells from PBMCs (more), cultured cells, and dissociated tissue. In addition, cells can be directly isolated from whole blood or bone marrow using StraightFrom Whole Blood MicroBeads. Overall more than 400 different MicroBeads and Isolation Kits are available. Upon automated separation, labeled cells as well as non-labeled cells are obtained and can be used for a variety of downstream applications such as functional and molecular assays, chimerism analysis, and flow cytometry. To ensure cell viability and integrity, cells are kept cooled in Chill Racks. Monitoring: Pre-set programs for all MACS MicroBeads and Isolation Kits ensure accurate sample handling. Sensors constantly monitor the status of the autoMACS Pro, buffer levels, and column status. This ensures optimal instrument performance and safety of samples and operators. Footprint: With MiniSampler: 605×455 mm (W x D) Height: 392.5-454 mm (adjustable touchscreen) It is a benchtop-sized instrument that will easily fit under a common laminar flow hood. Included Chill Racks: The Chill Racks are pre-cooled in the refrigerator (2–8°C). The special coolant contained in the racks switches from fluid to solid at 8°C and maintains a low temperature until the coolant is completely melted. The phase switch is visible. Do not cool racks below 0°C as cell samples may freeze! 1x Reagents rack 1x Chill 5 Rack: contains 24 slots for 5 mL tubes and can be used for cell separations of up to 6 samples. 4x Chill 15 Rack: contains 15 slots for 15 mL tubes and 5 slots for 5 mL tubes. It can be used for cell separations of up to 5 samples. 1x Chill 50 Rack: contains 6 slots for 50 mL tubes, 3 slots for 15 mL tubes, and 3 slots for 5 mL tubes. Up to 3 cell samples can be handled with a Chill 50 Rack.

Meet your lab’s specific needs with outstanding flexibility and performance with the easy-to-use The (more)rmo Scientific MultiDrop Combi Reagent Dispenser, designed to support the varied requirements of pharmaceutical and biotechnology laboratories. It combines the most versatile features for reagent dispensing with excellent performance for drug discovery or genomic and proteomic assays. Dispensing volume: 0.5 to 2500µl Dimensions (WxDxH): 360 x 330 x 220 mm Weight: 9 kg

Flat polygonal sheets - set (1 mg - 500 mg) F1 class mass standards are exceptional measuring tools  (more)that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. The set includes: wooden box 12 mass standards 1 pair of tweezers 1 brush Material: nickel silver *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

The power supply converts AC line voltage into 20kHz electrical energy. This high-frequency electric (more)al energy is fed to an inverter where it is converted into mechanical vibrations. The heart of the transducer is a lead zirconate titanate electrostrictive element that, when subjected to an alternating current, expands and contracts. The transducer vibrates in a longitudinal direction and transmits the motion to the horn tip which is immersed in the solution, causing cavitation. The implosion of microscopic bubbles or voids in the solution results, intensively stirring the molecules in the medium. The Sonifier functions in two modes: Pulsed and Continuous. In Pulsed Mode, ultrasonic vibrations are transferred to a solution at a rate of one pulse per second. This pulse duration can be adjusted from 0.1 to 0.9 per second, allowing the solution to be processed at full ultrasonic intensity while the temperature builds up – particularly valuable when processing warm volatile solutions and temperature-sensitive material. In continuous mode the Sonifier can be set for continuous duty. Used for: sample preparation, cell disruption, nanoparticle dispersion, mixing, homogenization, DNA, cell lysis, protein extraction