Beckman MLA-80 80K 80.000 rpm Rotor S/N 00U 428 P/N 367096 for MAX-XP Optima Max

Ohaus MB120 Moisture Analyzer MB120 allows you to run more samples, access saved data and spend less (more) time preparing and more time working with results. Smart, futuristic features that allow you to work at full potential: - Get started with SmartGuide ™ right away. This revolutionary feature automatically analyzes a sample and creates a method, thus eliminating any uncertainty from the initial setup. - The MB120 is able to produce fast and accurate results thanks to features such as a halogen heating system, customizable shutdown criteria and four integrated drying profiles. - The MB120 allows you to store up to 100 methods and 1,000 measurement results. Stored results can be exported and methods can be shared across multiple devices. Applications Determination of percentage humidity, determination of the recovery of percentage humidity, determination of solids in percentage, weighing Display 4.3 inch TFT color touchscreen display Operation Power cord (included) Communication RS232 with GLP / GMP data output, USB host and USB device (included) Structure Metal base, ABS top housing, halogen heat source, stainless steel plate holder, stainless steel plate manipulator, protective hood Construction features Seven shutdown criteria (manual, timed, custom automatic% / s, custom automatic mg / s, A30, A60 and A90), four drying profiles (standard, fast, ramp and step), storage up to 100 methods and 1,000 results for all methods, user guide, heating temperature range from 40 to 230 ° C (in 1°C increments), 14 languages ​​of operation Technical features Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Heat profiles: Standard; Fast; Ramp; Step. Recommended humidity range: 0% - 100%. Sample size: 0.5g – 1290g. Shutdown criteria: Manual; Timed; Automatic - Preset weight / time loss; Custom - User configurable weight / time loss; Custom: User configurable% moisture / time loss. Test library: 2. Additional features - MB90 Upper housing in ABS, weighing pan support in stainless steel, pan holder in stainless steel, protective hood, 3 shutdown criteria (manual, timed or automatic), 2 heating profiles (standard and fast), storage of up to 2 methods and 100 test results for each method, user guide, heating temperature range 40–200°C (in 1°C increments), 13 operating languages ​​(display only, no typing). Drying profiles Two pre-set profiles for drying in one step: just set the temperature and the timer. FAST: reaching the temperature in the shortest possible time. STANDARD: reduces overheating to a minimum while still reaching the temperature quickly. The simplest control panel • Icon driven menu navigation; no training is required. • 4 mechanical keys for fast one-step operation: Tare, Start/Stop, Print, On/Off. • Simplified moisture analysis; in just 3 steps, routine testing on samples: 1. Tare the empty sample dish. 2. Add sample according to best practices. 3. Press start and see your results! Halogen heating dries samples in seconds and is 40% faster than traditional infrared methods. Large, bright touchscreen display and quick and easy menu navigation for precise moisture analysis. Versatile connectivity options to handle data collection and transfer needs: improve user experience. • USB and RS232 ports - quick connections to a PC or flash drive. • Data collection and transfer directly to a USB stick.

Dimensions (HxWxD): 600 x 1200 x 330 mm Internal dimensions (HxWxD): 550 x 570 (x2) x 270 mm

LM 1857 Alcohol Breathalyzer meters

A homogenizer is a laboratory or industrial instrument used for the homogenization of various types  (more)of materials, such as fabrics, plants, food, soil and many others. The OV 625 Digital laboratory disperser guarantees the highest level of reproducibility for a wide range of laboratory applications. Cutting-edge technology and engineering, like all Velp scientific products, guarantee precision and high shear force for rapid homogenization, emulsification, suspensions and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products. Excellent mechanical properties and high chemical resistance make it suitable for even the most demanding laboratory challenges. DISPLAY AND CONTROL Bright, intuitive LED display and rotary knobs allow you to fine-tune the speed between 3,000 and 25,000 rpm. Clear speed information on a black background aids visibility in all conditions. SAFE AND RESISTANT Safety features ensure maximum operator protection. For example, once the set point speed has been set, the OV 625 Digital will reach it gradually. In addition, various alarms warn the user in case of overload and overtemperature. The resistant and hermetic structure allows correct operation even in the most difficult conditions. Warranty up to 3 years. For maximum comfort, choose the model with the double pole stand. CHOOSE THE SUITABLE ACCESSORY Choosing the right dispersing tool is essential to achieve maximum performance and high reproducibility. VELP dispersion tools are made of stainless steel (316L) and equipped with a PTFE seal, to be compatible with different types of samples and reagents. To handle different fluids, different dispersion tools are required. In some applications it is necessary to use two dispersing tools in order to achieve a final fineness level from coarse to fine. Thanks to a knob and a quick fastening system, inserting and changing the dispersion tool is simple and fast: in seconds you can switch from one application to the next. FOCUS ON THE PRODUCT What is a disperser? The disperser can be called in several different ways: homogenizer; Cell Lysor, High Shear Mixer, Polytron, Stator Rotor Homogenizer, Sonicizer or Tissue Tear. The various nomenclatures are due to the various uses of this tool and you have different results that can be obtained through the accessories. Essentially, a disperser is used to create a uniform mixture by forcing the sample through a narrow, confined space. Blade homogenizers, such as Velp's OV 625 Digital, use the blades as a rotor for dispersing. How does it work? The dispersing tool consists of a rotor rotating at high speed inside a stationary stator. The area between the rotor tip and the stator slot is called the shear gap. Thanks to the high circumferential velocity, the fluid is drawn axially into the dispersion head and forced radially through the cutting gap, breaking up the particles.

Digital time setting: 1 min – 24 hrs/non–stop (increment 1 min) Vertical rotation speed control rang (more)e: 1 – 100 rpm (increment 1 rpm) Vertical rotation movement: overhead, 360° Vertical rotation time setting range: 0 – 250 sec Maximum continuous operation time: 168 h Reciprocal rotation speed control range: 1 – 100 rpm (increment 1 rpm) Reciprocal rotation tilt angle range: 1° – 90° (increment 1°) Reciprocal rotation time setting range: 0 – 250 sec Vibro rotation tilt angle range: 0° – 5° (increment 1°) Vibro rotation Pause / Vibro time setting range: 0 – 5 sec Maximum load: 0.5 kg Overall dimensions (WxDxH): 365 x 195 x 155 mm Weight: 1.7 kg

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W