Concentrators

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

miVac is a range of centrifugal concentrators capable of removing water and organic solvents from a  (more)variety of sample formats including tubes, microplates and vials. miVac systems are suitable for use with a wide range of solvents, from volatile organic types through to water and many medium boiling point solvents. The system is very simple to use, allowing samples to be safely concentrated or taken to complete dryness. The large clear display enables easy monitoring of time and temperature. The intuitive controls allow inexperienced users to get first-class results, while allowing more sophisticated programming for experienced workers. The simple, robust design ensures years of reliable service even when used intensively, such as in teaching or multi-user laboratories. To improve performance there are built-in special modes for working with water and alcohols. Performance is further enhanced through the use of the miVac SpeedTrap refrigerated condenser. Simplified operation with optimized programs for water, alcohol and other solvents Precise temperature control with timer and digital display up to a max of 60°C Various heating functions (preheating and heating of the interior) Plastic coated aluminum chamber and acrylic glass cover for better chemical resistance The rotors are easily interchangeable Compact systems are quiet when in use and up to 40% faster than comparable machines

Savant SPD121P-230 Speed Vac Centrifugal Vacuum Concentrator This was removed from a university lab  (more)where it was surplus to requirements. The unit is operational and powers on successfully. However, as the lid does not lock properly, it is listed as Spares or Repair. It is in good cosmetic condition with minor marks. Rotor holds 40 x 2ml tubes

This Genevac miVac Duo Centrifugal Concentrator was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and is in good working order. The unit is in reasonably good cosmetic condition but has a cosmetic crack in the lid and the seal has split.

This item has just arrived in our stock. Please enquire for further details.

Barnstead GeneVac MiVac DNA Concentrator This item was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition. 48-well aluminium rotor which holds:1.5/2ml centrifuge tubes

Savant Speed Vac Model SPD121P Centrifugal Concentrator Evaporator This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order, though it has not been tested under a vacuum

Barnstead Genevac miVac Duo Concentrator DUC-23050-A00 This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working to 1400rpm, and the heating function is also working. It has not been tested under a vacuum. It is in good cosmetic condition with minor marks form use. There is some cosmetic crazing on the lid.

Christ Rotations Vacuum Concentrator System RVC 2-25 CT 02-50 This was removed from a university lab (more) where it was surplus to requirements. All elements of the system power up and are in good working order. The system is in good cosmetic condition with minor marks. Included are; Christ RVC 2-25Type - 100225 Christ CT 02-50Type - 100502 Vacubrand Diaphragm Vacuum PumpModel - MZ 2C

Genevac miVac Centrifugal Concentrator System Lab This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). We are unable to test the system further at our facility. System includes the following: 1x Genevac miVac Control BoxType: 600037-05S/N: 084655 1x Genevac miVac PumpM/N: QUP-23050-A00S/N: QUP-230090077 1x Genevac miVac SpeedtrapM/N: MST-23050-A00S/N: MST02090324 1x Genevac miVac ConcentratorM/N: DUC-23050-A00S/N: DST02090233 1x Rotor 8x50ml tubesP/N: DRC-50CCT-008 1x Rotor 84x1.5ml tubes (fitted)P/N: DRC-15EPP-084 1x Genevac miVac Pressure Controller Manual

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Labconco Glass Trap for CentriVap DNA Concentrator Liquid Trap prevent liquid from entering the pump (more). LiquidTrap Kit includes a borosilicate glass container that holds 240 milliliters ofliquid, an epoxy-coated steel bracket for attachment to the side of a CentriVapConcentrator or RapidVap Vacuum Evaporation System, 18" (45.7 cm) of 0.5ID (1.3 cm) vacuum tubing, and two vacuum tubing clamps. INCLUDED: The Labconco 7970500 Glass Trap for CentriVap DNA Concentrator includes: - Steel Bracket for Attachment to CentriVap - Vacuum Tubing - Clamps x 2 - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap DNA Centrifugal Concentrator Centrifugal force and vacuum rapidly evaporate s (more)olvents from multiple small samples DNA rotor holds seventy-two 0.5mL sample tubes or sixty 1.5 or 2.0mL sample tubes Memory stores nine user-set programs Corrosion-resistant diaphragm pump achieves vacuum of 7 mBar; has pumping capacity of 34L/min. Heat and run times set separately, each from 1 to 999 minutes so that heat may be programmed to shut down sooner than run to protect heat-sensitive samples from excessive heat exposure after solvent evaporates Large phenol-free lid seal ensures good vacuum without potential for phenol contamination Easy-to-read LCD display prompts user to set program parameters and displays program number, actual and set point temperatures, point heat, and run time remaining INCLUDED: The Labconco 7970010 CentriVap DNA Centrifugal Concentrator, 115V, 60Hz includes: - DNA Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Acid-Resistant Benchtop Concentrator Durable, acid-resistant components throu (more)ghout the vapor path Can be used with samples containing 0.1 to 1%TFA, hydrochloric acid, acetic acid, hydrobromic acid, ammonium hydroxide, and sodium hydroxide PTFE-coated aluminum chamber with glass lid, large phenol-free lid gasket and safety sensors Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Quick-Stop system stops vacuum pump, open valve and stop rotor Memory stores nine user-set programs Brushless motor spins up to 1725RPM Automatic vacuum release valve Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes PREHEAT/COOL button to reach set point temperature Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. Chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates INCLUDED: The Labconco 7810016 CentriVap Acid-Resistant Benchtop Concentrator includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator with Glass Lid Eliminates bumping and foaming, maximize (more)s trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810014 CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator with Heat Boost Eliminates bumping and foaming, maximiz (more)es trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810012 CentriVap Benchtop Concentrator with Heat Boost, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Benchtop Concentrator Eliminates bumping and foaming, maximizes trace solute  (more)recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810010 CentriVap Benchtop Concentrator, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap micro IRVacuum Concentrator Compact dimensions: 8.8L x 10.4W x 8.9 in.H (22. (more)4 x 26.4x 22.6cm); overall depth including glass trap: 12.9 (32.8cm) PTFE coated chamber Transparent infrared (IR) glass lid directs heat to the samples to speed evaporation and reduces cross contamination from condensation Built-in PTFE coated diaphragm pump Microprocessor-controlled 300W heater Centrifugal motion of 1700 rpm Built-in front-mounted analog vacuum gauge Easy-to-read LCD display 75mL glass trap Quiet operation Fast evaporation Click Here to View Product Video INCLUDED: The Labconco 7701020 CentriVap micro IRVacuum Concentrator, 115V, 60Hz includes: - Rotor 1.5ml x 24 - CentriZap micro IR LED Strobe Light - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Complete Acid-ResistantVacuum Concentrator with Heat BoostTheall-in-one CentriVap (more) Complete Vacuum Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315023 CentriVap Complete Acid-ResistantVacuum Concentrator with Heat Boost, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap CompleteVacuum Concentrator with Heat BoostTheall-in-one CentriVap Complete Vacuu (more)m Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315022 CentriVap CompleteVacuum Concentrator with Heat Boost, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap Complete Acid-ResistantVacuum ConcentratorTheall-in-one CentriVap Complete Vacuum (more) Concentrator houses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315021 CentriVap Complete Acid-ResistantVacuum Concentrator, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriVap CompleteVacuum ConcentratorTheall-in-one CentriVap Complete Vacuum Concentrator h (more)ouses every component youneed to begin processing multiple samples; vacuum concentrator, -50C coldtrap, diaphragm pump, rotor and CentriZap strobe light. Just add your samplesin the containers of your choice and start concentrating. Using centrifugalforce, vacuum and controlled heat, the CentriVap Complete speeds concentrationof samples used in a variety of applications found in molecular biology,proteomics, genomics, cell biology, microbiology, biochemistry, drug discoveryand analytical chemistry.Acid-resistantmodels are available for corrosive chemical use. Other models feature HeatBoost, which surrounds the chamber wall, to further speed evaporation of highboiling point solvents. Click Here to View Product Video INCLUDED: The Labconco 7315020 CentriVap CompleteVacuum Concentrator, 115V, 60Hz includes: - Coupling Insert - Rotor, 12-13 mm - Glass Jar - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid, North America Plug & Recep (more)tacleUsingcentrifugal force, vacuum and controlled heat, the Acid-Resistant CentriVapVacuum Concentrator rapidly concentrates multiple small samples containingchemicals such as 0.1 to 1% TFA, hydrochloric acid, acetic acid, hydrobromicacid, ammonium hydroxide and sodium hydroxide. Components in the vapor path areconstructed of corrosion-resistant materials for long life. Click Here to View Product Video INCLUDED: The Labconco 7310042 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, North America Plug & Receptacle includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid One FilterMate is capable o (more)f exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes One FilterMate is capable of exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes Programming holds two temperatures and times Setpoints for first and second temperatures and run times are selected separately PREHEAT/COOL button activates the refrigeration system and heater to reach setpoint temperature Set temperatures and times can be altered while a program is in process Memory stores up to nine user-defined programs Choose removable acrylic lid or solvent-resistant glass lid, each with large phenol-free lid gasket Utilize centrifugal force, vacuum and heat Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Brushless motor spins up to 1725rpm Quick-Stop system stops vacuum pump, open valve and stop rotor Automatic vacuum release valve Lid latch with safety sensors Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates Click Here to View Product Video INCLUDED: The Labconco 7310022 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid Programming holds two tempe (more)ratures and times Setpoints for first and second temperatures and run times are selected separately PREHEAT/COOL button activates the refrigeration system and heater to reach setpoint temperature Set temperatures and times can be altered while a program is in process Memory stores up to nine user-defined programs Choose removable acrylic lid or solvent-resistant glass lid, each with large phenol-free lid gasket Utilize centrifugal force, vacuum and heat Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Brushless motor spins up to 1725rpm Quick-Stop system stops vacuum pump, open valve and stop rotor Automatic vacuum release valve Lid latch with safety sensors Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates Click Here to View Product Video INCLUDED: The Labconco 7310021 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop ConcentratorTheRefrigerated CentriVap Centrifugal Concentra (more)tor is designed to rapidlyconcentrate multiple small heat-sensitive samples, such as RNA and proteins,using centrifugal force, vacuum and controlled temperature. This exclusiveconcentrator combines a refrigeration system that cools to -4ºC with a heaterthat warms to 100ºC to achieve the user’s desired set point temperatures. Click Here to View Product Video INCLUDED: The Labconco 7310020 Refrigerated CentriVap Benchtop Concentrator, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump The Eppendo (more)rf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump (catalog number 022820168) was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. The advanced heating technology provides best treatment for your sample which assures quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. Our new coated lid provides superior chemical resistance against aggressive acids and organic solvents . INCLUDED: The Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump includes: - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump SpecificationsVacuum20 hPa (20 mbar)Sample Capacitymax. 144 vessels/2 microplatesFixed Speed1,400 rpmTube Volume0.2-50mlVolume Range72mlPower Supply120 V, 50-60HzMax. Power Consumption350WDimensions (W x D x H)33 x 58 x 29cmWeight w/o accessories31.5kg