Labconco 7810010 CentriVap Benchtop Concentrator, 115V, 50/60Hz

ZYMARK TurboVap II Evaporation/Concentrator System The Turbovap 2 has 6 sample positions of 200 ml T (more)he TurboVap II Concentrator Workstation is a microprocessor-controlled concentrator that provides automated sample evaporation, unattended operation, convenience and speed. Water bath capacity: 6.4 L of distilled water Gas Supply Requirements: Minimum inlet pressure 30 psi/2.1 bar. Maximum inlet pressure 80 psi/5.5 bar. Power supply: 220–240 V~, 50 Hz, 5 A Dimensions (LxDxH): 53.8 cm x 30.5 cm x 30.5 cm / 21.2" x 12" x 12" Weight 18.4 kg/40.5 pounds Without tubes / Matra With traces of rust Functional heating system No leak optical sensor not checked

Labconco CentriVap Benchtop Concentrator with Glass Lid Eliminates bumping and foaming, maximize (more)s trace solute recovery Microprocessor-controlled 300w heater covers ambient to 100C in 1° increments Optional Heat Boost™ surrounds chamber with extra controlled heat at programmed temperature, in closer proximity to sample Electrical receptacle included for an accessory vacuum pump (available separately) Vacuum delay prevents bumping by allowing rotor to achieve speed before applying vacuum Quick-Start™ button starts rotor, heater, timers and pump Quick-Stop™ system stops pump, opens vacuum release valve and stops rotor in seconds after time expires or RUN/STOP button is pressed Memory stores nine user programs (temperature/heat time/run time); LCD shows operating parameters and programs Compact, low-profile design Choice of removable acrylic lid with large, durable lid seal, or glass lid for use with solvents that attack acrylics Safety latch locks lid when rotor is turning, prevents start-up when lid is open Corrosion-resistant sample chamber has epoxy finish for easy cleaning and decontamination Microprocessor-controlled brushless motor runs at up to 1725rpm Stacks on top of cold trap to save space With 0.5 in. O.D. vacuum tube fitting INCLUDED: The Labconco 7810014 CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Refrigerated CentriVap Benchtop ConcentratorTheRefrigerated CentriVap Centrifugal Concentra (more)tor is designed to rapidlyconcentrate multiple small heat-sensitive samples, such as RNA and proteins,using centrifugal force, vacuum and controlled temperature. This exclusiveconcentrator combines a refrigeration system that cools to -4ºC with a heaterthat warms to 100ºC to achieve the user’s desired set point temperatures. Click Here to View Product Video INCLUDED: The Labconco 7310020 Refrigerated CentriVap Benchtop Concentrator, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Concentrator plus has three main operation modes: Concentrate, centrifuge and desiccator – to co (more)ver all your application needs. Processing times are reduced by up to 20% thanks to the ability to choose between three application modes that correspond to sample solvent (aqueous, alcohol or high vapor pressure). The choice of four heating levels (ambient, 30°C, 45°C, 60°C) enables safe and efficient concentration of various samples. When working with delicate samples you also have the option to turn off the brake function. equipped with: 1x Eppendorf F45-8-17 rotor for 8 x 15 mL falcon tubes. 1x Eppendorf F45-48-11 rotor 48 x 1.5/2 mL microtubes. Vacuum: 20 mbar Fixed speed: 1400 rpm Dimensions (WxDxH): 330 x 370 x 230 mm Weight: 16,5 kg

The Stuart sample concentrator, when used in conjunction with a Stuart block heater, uses the princi (more)ple of solvent evaporation to concentrate samples. When heat, applied to the samples by the block heater, is combined with a stream of inert (usually nitrogen) directoed onto the surface of the solution, vapour is rapidily driven off and the sample is quickly concentrated. A large number of samples can be processed in a matter of minutes. Temperature Range: Ambient +8°C to 200°C Temperature Stability at 37°C: ± 0.1°C Uniformity Within Block at 37°C: ± 0.1°C Uniformity Within Block at 130°C: ± 1°C Display Resolution: 0.1°C Dimensions (w x d x h): 310mm x 280mm x 115mm Net Weight (no blocks): 3.2 kg Equipped with 3 SHT1/16 blocks Capacity 12 holes with 16 mm tube diameter

Ohaus i-DF33XW2500B1R Defender 3000 Floor Scale, 2500 lb., 0.5 lb. Maximum Capacity 2500 lb. (1,250  (more)kg) Readability 0.5 lb. (0.2 kg) Platform Size 3 x 3 ft. (914 x 914 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Standard RS232 and optional USB Device or Ethernet - ABS plastic or 304 stainless steel indicator, 5 mm/0.196 in. fixed top plate, black painted steel treaded platform, IP65 stainless steel junction box with side access, alloy steel load cells, two carbon steel eye bolts, painted steel ramp available - Four load cell mounted feet with self-swiveling ball-in-cup design, painted and stainless steel floor stands (available as accessories) The Ohaus Defender 3000 Floor Scales meet dry weighing needs in industrial and commercial use. Their high-quality construction is designed to minimize flexing under heavy loads for years of dependable performance. The indicator features a bright display that can change color when in check mode. Scale also includes counting and totalization modes. Stainless steel bases include IP68 loadcells for wet areas. Ramps and mounting plates are available. INCLUDED: The Ohaus i-DF33XW2500B1R Defender 3000 Floor Scale, 2500 lb., 0.5 lb. includes: - 2 x Eyebolts - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 44 x 1.5/2.0ml Rotor for Z216 Series The Hermle 44 x 1.5/2.0ml rotor is a high-capacity rotor (more) designed for use with the Hermle Z216 series centrifuges. With a maximum speed of 15,000 RPM and a maximum RCF of 21,127 x g, this rotor can accommodate up to 44 1.5/2.0ml tubes at a 32°/55° angle. The rotor's unique dual row and dual-angle design allows for efficient separation of samples, making it an ideal choice for a wide range of applications in molecular biology, cell biology, and biochemistry. One of the key features of the Hermle 44 x 1.5/2.0ml rotor is its high capacity. With the ability to accommodate up to 44 tubes at once, this rotor is ideal for high-throughput experiments where time and efficiency are critical. The rotor's dual-angle design ensures that samples are separated efficiently and consistently, minimizing the risk of cross-contamination and producing reliable results. INCLUDED: The Hermle 44 x 1.5/2.0ml Rotor for Z216 Series includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty