Labconco 7310021 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz

Genevac miVac Centrifugal Concentrator System Lab This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). We are unable to test the system further at our facility. System includes the following: 1x Genevac miVac Control BoxType: 600037-05S/N: 084655 1x Genevac miVac PumpM/N: QUP-23050-A00S/N: QUP-230090077 1x Genevac miVac SpeedtrapM/N: MST-23050-A00S/N: MST02090324 1x Genevac miVac ConcentratorM/N: DUC-23050-A00S/N: DST02090233 1x Rotor 8x50ml tubesP/N: DRC-50CCT-008 1x Rotor 84x1.5ml tubes (fitted)P/N: DRC-15EPP-084 1x Genevac miVac Pressure Controller Manual

Savant SPD121P-230 Speed Vac Centrifugal Vacuum Concentrator This was removed from a university lab  (more)where it was surplus to requirements. The unit is operational and powers on successfully. However, as the lid does not lock properly, it is listed as Spares or Repair. It is in good cosmetic condition with minor marks. Rotor holds 40 x 2ml tubes

Labconco Refrigerated CentriVap Benchtop Concentrator with Glass Lid One FilterMate is capable o (more)f exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes One FilterMate is capable of exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes Programming holds two temperatures and times Setpoints for first and second temperatures and run times are selected separately PREHEAT/COOL button activates the refrigeration system and heater to reach setpoint temperature Set temperatures and times can be altered while a program is in process Memory stores up to nine user-defined programs Choose removable acrylic lid or solvent-resistant glass lid, each with large phenol-free lid gasket Utilize centrifugal force, vacuum and heat Brushed, stainless steel and glacier white, epoxy-coated steel exterior w/blue accents 300-watt heater increases temperature in one degree increments up to 100C Quick-Start One Button Start Up to simultaneously activate rotor, heater, timers and vacuum pump Brushless motor spins up to 1725rpm Quick-Stop system stops vacuum pump, open valve and stop rotor Automatic vacuum release valve Lid latch with safety sensors Easy-to-read LCD display Separate heat and run times, each from 1 to 999 minutes Audible alarm signals completion of set point run time Electrical receptacle enables connection of accessory vacuum pump Vacuum pump has quick disconnect fitting for connection of a vacuum gauge 12 in. dia. chamber accommodates a wide variety of rotors, including microtiter plate rotors for 96-well plates Click Here to View Product Video INCLUDED: The Labconco 7310022 Refrigerated CentriVap Benchtop Concentrator with Glass Lid, 115V, 50/60Hz includes: - Tubing - Clamps x 2 - Coupling Insert - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

miVac is a range of centrifugal concentrators capable of removing water and organic solvents from a  (more)variety of sample formats including tubes, microplates and vials. miVac systems are suitable for use with a wide range of solvents, from volatile organic types through to water and many medium boiling point solvents. The system is very simple to use, allowing samples to be safely concentrated or taken to complete dryness. The large clear display enables easy monitoring of time and temperature. The intuitive controls allow inexperienced users to get first-class results, while allowing more sophisticated programming for experienced workers. The simple, robust design ensures years of reliable service even when used intensively, such as in teaching or multi-user laboratories. To improve performance there are built-in special modes for working with water and alcohols. Performance is further enhanced through the use of the miVac SpeedTrap refrigerated condenser. Simplified operation with optimized programs for water, alcohol and other solvents Precise temperature control with timer and digital display up to a max of 60°C Various heating functions (preheating and heating of the interior) Plastic coated aluminum chamber and acrylic glass cover for better chemical resistance The rotors are easily interchangeable Compact systems are quiet when in use and up to 40% faster than comparable machines

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leica MZ95 Microscope System & K Systems IVF Workstation  L224 LAF The system has been tes (more)ted and all modules are in full working order. Everything is in good cosmetic condition with minor marks from use. Included are; K Systems IVF WorkstationType - L224 LAFSN - 11100161Internal workspace - L122 W50 H71cmHeating function is working. Microscope:-Leica MZ952 x Leica Eye Pieces 10x/21B (10447160)Leica Plan 1.0x (10446275) K Systems Lamp (fitted underneath)Type - LS14SN - 11010194 RI IVF Witness Heated Control UnitSN - 862 RI IVF Witness Box with cables and stand

Scilogex iFlow Motorized LCD Digital Bottle Top Dispenser, 0.1-99.9ml, 110-240V Volume Range 0.1 to (more) 99.9ml - 100ul resolution Max. piston capacity 10ml Volume increments 0.1ml Features - Two dispensing modes. Single volume dispensing to 99.9ml or multi-dispensing (from 0.2ml x 50 times, to 5ml x 2 times) - High quality stepper motor provides smooth and accurate dispensing - Aspirate and dispense speed is adjustable - Recirculation feature minimizes waste when priming - TFT display module for simple volume selection and control - Comes with corded remote control to start and stop dispensing - Comes with adjustable titrating nozzle with flexible length - 45mm plus included adapters (GL25, GL28, GL32, GL38 & S40mm) to fit all common lab bottles Scilogex iFlow Electronic Motorized Digital Bottletop Dispensers are ideal for safe, accurate and precise dispensing of bases, saline solutions, acids and some organic solvents. (Please check our chemical compatibility chart below for compatible liquids and permissible concentrations). Dispense from 0.01ml to 99.99ml (10ml piston capacity, so the piston will refill 10 times for the 99.99ml maximum volume) simply controlled by the TFT touch screen display module. Choose from either the fixed position dispense nozzle or the included adjustable dispensing nozzle with flexible tube. A recirculation feature minimizes waste when priming. A corded remote control is also included. The iFlow is totally portable and can be recharged in 4 hours providing approximately 5 hours usage. Alternatively the 110-240V multi-voltage power adapter can be used for uninterrupted use. INCLUDED: The Scilogex iFlow Motorized LCD Digital Bottle Top Dispenser, 0.1-99.9ml, 110-240V includes: - GL25, GL28, GL32, GL38 & S40mm Adapters - Adjustable Dispersing Nozzle - Corded Remote Control - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Biosart 100 Monitor, 100 ml, CN Membrane, white-black, 0.45um, individually packaged, 47pcs Sartoriu (more)s Biosart 16401-47-06-ACK Individually Packaged Filtration Monitor, White Cellulose Nitrate Membrane with Black Grid, 100ml Volume, 0.45µm Pore Size (Pack of 47) Quantity available: 2 boxes Please note expiry date expired: 03/2023

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

FURTHER DETAILS TO FOLLOW